Everything you need to prep and protect your paint in one box. ARMOUR PRO Quartz Coating is the strongest DIY ceramic coating in the ARMOUR range, delivering pro level protection in a sleek, single layer formula. Featuring ARMOUR's exclusive LayerSync Bonding system, the August 2025 reformulation has lifted durability, gloss, and chemical resistance to a new benchmark for user friendly ceramic coatings.

What's Included

1 x ARMOUR Detail Supply PRO Quartz Coating (5+ years) V2, in your choice of 30ml or 50ml, with dropper top, microfibre coating applicator pad, Coating Door Jamb Sticker and How To direction card
1 x ARMOUR Detail Supply IRON Remover 473ml
1 x ARMOUR Detail Supply Panel Prep 473ml
6 x Maxshine Premium Ceramic Coating and Wax Removal Cloth 350GSM

Why This Kit Works

ARMOUR PRO Quartz Coating V2: The August 2025 reformulation of ARMOUR's flagship coating, now on a silazane base with LayerSync dual phase bonding. Expect 5+ years of real world durability from a single layer, a 105.9° water contact angle for extreme beading and self cleaning, and chemical resistance across the full 0 to 13 pH range. One bottle coats paint, chrome, plastic trim, wheels and glass.
ARMOUR IRON Remover: A low odour, pH neutral fallout remover with colour changing technology that dissolves brake dust, rail dust and embedded ferrous contamination before you coat.
ARMOUR Panel Prep: An isopropyl alcohol based prep spray with specialised degreasers and surfactants that strips polishing oils and residue so the coating bonds to a truly clean surface. Proper prep is what makes the coating last.
Maxshine 350GSM Coating Cloths: Edgeless, tag free 40cm x 40cm cloths (80% polyester, 20% polyamide) purpose made for levelling ceramic coatings without scratching. Six cloths keep a fresh towel ready for every panel and both wipe stages.

PRO Quartz Coating Specifications

Durability: 5+ years real world, single layer (no stacking required)
Base: Silazane (V2 reformulation, August 2025)
Solids content: Approximately 65% activity level
Hardness: Greater than 9H
Film thickness: Approximately 3 to 4 microns
Water contact angle: 105.9° (tested on True Automotive panel and paint)
Chemical resistance: 0 to 13 pH
Flash time: 15 to 60 seconds (approximately 30 seconds on average)
Working temperature: 4°C to 38°C
Applicable surfaces: Paint, chrome, plastic, wheels, glass
Shelf life: 12 months sealed, 30 days after opening

Coverage Guide

15ml coats one small car
30ml coats one large truck or SUV (or two small cars)
50ml suits bigger jobs or shop use

How to Use This Kit

Step 1. Wash and decontaminate. Wash the vehicle first. Working on a clean, cool panel out of direct sunlight, spray ARMOUR IRON Remover onto the surface and let it react for 3 to 5 minutes as it changes colour. Keep it wet with mists of water so it never dries, then rinse thoroughly with a strong stream of water. Follow with a clay bar or clay mitt (not included) if embedded contamination remains.

Step 2. Panel wipe. Spray ARMOUR Panel Prep evenly over the surface and let it dwell for 15 to 30 seconds to dissolve oils. Wipe with a Maxshine cloth until clear, then do a final wipe with a fresh cloth. Repeat until all oils and residue are removed. If you did not polish the paint, panel prep twice.

Step 3. Apply the coating. Prime the applicator with 3 lines of ARMOUR PRO; each later application needs only a small amount. Work one section at a time in an X pattern, box in the edges, then level with small overlapping circles. Allow roughly 30 seconds for the coating to flash, looking for small sweat beads or a light haze.

Step 4. Level in two stages. With a first Maxshine cloth, level the coating 90% or more using smooth circular motions. Switch to a fresh cloth for final levelling in straight lines, and check each panel for streaks or high spots. Rotate to a fresh cloth side every panel.

Step 5. Cure. Allow a minimum of 4 hours for the initial cure, after which the vehicle can be driven and get wet. Do not wash or expose to chemicals for 24 hours.

Pro tip: For maximum gloss, slickness and a sacrificial top layer, apply ARMOUR PHOBIC on top of PRO after 1 to 2 hours. ARMOUR AMPLIFY can be applied after 4 hours to protect the coating during its initial cure.

Precautions

Shake all chemicals well before use
Avoid applying in direct sunlight, and never let IRON Remover or Panel Prep dry on the surface
Wear skin, eye and respiratory protection
Always test a small area first to determine flash time
Colder conditions extend wipe off time (45 to 60 seconds); hotter conditions shorten it (15 to 20 seconds)

Armour PRO Quartz Ceramic Coating 5+ Year Kit