Gliss Full slickness
CarPro Gliss - Hyper slick top Coating 30ml/50ml Durability: 6-12 Months
CarPro Gliss - Hyper slick top Coating 30ml/50ml Durability: 6-12 Months
CarPro Gliss - Hyper slick top Coating 30ml/50ml Durability: 6-12 Months
CarPro Gliss - Hyper slick top Coating 30ml/50ml Durability: 6-12 Months
CarPro

CarPro Gliss - Hyper slick top Coating 30ml/50ml Durability: 6-12 Months

Regular price $81.85 Sale price $75.00 Save $6.85

This incredible next-gen coating serves multiple purposes and even excels as a stand-alone paint protection and enhancement system with a HYPER slick surface that will make your jaw drop!

Features and benefits:

  • Hyper SLICK and smooth
  • Next Generation Top Coat!
  • Also works great as a stand-alone Nano-coat!
  • Anti-static: Non-oily / resists dust retention
  • Adds thickness to your existing coat when used as a top coat
  • Enhances resistance to water spots and mineral stains
  • Extreme Hydrophobic effect
  • Enhances Gloss and life of any ceramic coating

DIRECTIONS:

Directions: (For use as a primary coat)

  • Wash with Reset, decontaminate, and polish with a CarPro or Scholl polish
  • Wipe down with CarPro Eraser (vehicle must be 100% dry and free of moisture or dew.)
  • Drag two lines of product across the length of suede wrapped applicator.
  • Apply evenly across the surface, approximately 2 ft x 2 ft section at a time.
  • Add more product to the applicator as needed to keep a wet, even application.
  • GLISS will flash fast and when a white haze forms, immediately wipe off all residues using a microfiber towel. If the haze is left on too long then reapply and immediately wipe off.
  • If layering on top of itself, wait 1 hour between coats. If IR cured may repeat immediately. Total cure time: 12 hours.

    Tips for use as the top coat on CQuartz.

    • May be applied 4 hours or longer after CQuartz application.
    • If CQuartz was IR cured then only 1 hour is needed.
    • GLISS may flash slightly faster when applied over CQuartz.
    • Durability: 6-12 Months.
    • Avoid washing for 7 days after application.

    After the Application:

    • Keep surface dry for at least one hour after the application. Wipe water off the surface during the first 24 hours after the application.
    • Avoid washing for 7 days after application.

    Maintainance:

    • Wash regularly with CarPro Reset orCarPro Ech2o


    Some Q and A from the Carpro USA Website:

    Q. What does Gliss means? 

    A. Gliss in French means very slick surface.

    Q. Does Gliss perform as a sealant or a coating?
    A. It is a lighter version of the CQuartz coatings

    Q. Can it be used on top of Reload, Essence Extreme, or Essence Plus?
    A. No, since they will not allow the coating to bond to the surface.

    Q. Can you use it as stand-alone coat?
    A. Yes its very easy to use and will bond well on bare paint.

    Q. Do you need to use Eraser precoat?
    A. Yes to ensure the surface is free of any oils that will prevent the coating from bonding. If a wax or sealant has been previously applied to the surface they will need to be stripped as Eraser will not remove them.

    Q. Can we use CQuartz on top of Gliss?
    A. No

    Q. Can Gliss be applied over a previously coated car which was done a few months ago?
    A. Yes