ETHOS GRAPHENE MATRIX COATINGS V2 DURABILITY 5 YEARS OF PROTECTION

Graphene Matrix Coating V2.0’s unparalleled hydrophobic properties to resist contamination is due to its extremely high water contact angle. Shedding water and contaminants with ease, while greatly reducing the risk of etching, water spots, and staining on the paint surface. In addition to its resistance to swirl marks, scratching, weathering, and oxidation, Graphene Coating V2.0 creates a layer that forms an almost impenetrable barrier on top of the vehicle's paint once applied. Future maintenance, cleaning, and washing of your vehicle will never be easier.

5 Years of Protection

Graphene Matrix Coating durability is rated in years, not months like many spray on “Coatings”. Once applied, Graphene Matrix forms a permanent bond to the surface, protecting and repelling contaminants.

Hydrophobic Nanotechnology

Graphene Matrix Coating’s unparalleled ability to resist contamination is due to its extremely high surface sheer angle, shedding water and contaminants while reducing the risk of etching, water spotting, and staining. In addition to its resistance to abrasion, weathering, and oxidation, Graphene Matrix Coating creates a layer that forms an almost impenetrable barrier on top of the surface once applied. Future maintenance, such as clay barring and light polishing to repair possible imperfections in the coating, can be performed without sacrificing its integrity, resulting in the ability to finally achieve a near-permanent coating.

How to Prep for Application

Clean any loose dust, dirt and contaminants from the surface.
Clay bar any rough embedded contaminants from the surface to ensure no impurities interfere with the coatings properties.
Polish/Compound to remove any paint defects in the form of scratches, swirl marks and oxidation. Graphene Matrix is a semi permanent coating so once applied any defects will remain sealed underneath.
Deep clean any polish oils or residues from the surface that could inhibit the bonding process using Ethos Detox.
Remove any residual water that can be hiding underneath panel gaps, headlights or taillights which could drip out and affect the coatings curing process.

Installation Notes

Temperature and humidity can play a big factor in “flash” time (Time between application and when the coating is ready to be wiped off). We recommend applying in temperatures between 65-75*. In higher temperatures flash time will be expedited so first test using a small section to determine workability before moving onto the rest of the vehicle.

Graphene Matrix can be applied to any painted, plastic or glass surface (including windshield).

How To Apply

Make sure the surface has been completely cleaned and decontaminated with

Ethos Detox. The cleaner the surface, the better the bond!

Shake bottle well.
Apply a few drops of Graphene Matrix onto your applicator until evenly covered.
Starting with horizontal / top surfaces first, applying in straight lines slightly overlapping from one line to the next. Work in small areas approximately 60cm x 60cm or the size of a door or half a hood at a time. Temperature and humidity will determine coverage areas allowable between application and removal.
Applicators should glide smoothly on the surface while laying down an even layer of coating. If the applicator starts to drag or the application becomes inconsistent, apply additional drops to the applicator.
Immediately after application, you will notice a “Rainbow Effect” (More prevalent on dark colors) while the applied coating bonds to the surface. Roughly 1-3 min after application, the “Rainbowing” will start to turn into a haze/fog, this means the coating is ready for removal. (Temperature and humidity will expedite the flash time. Test a small area first before continuing onto the rest of the vehicle)
Using premium microfiber towels (Preferably The Rag Company’s Edgeless 300’s), thoroughly wipe down the section to remove the Graphene Coating residue. Your first wipe should remove about 80% of the residue, and your second wipe should easily remove the remainder. Use small, circular motions and little to no pressure during removal.
IMPORTANT: Be sure to check adjacent panels to make sure you haven’t “pushed” excess coating to other areas. (We recommend using a flashlight or smartphone light for inspection to make sure every bit of residue is gone. If you fail to remove all of the residue during the flash time, it will become a dark spot once it cures and can require polishing or compounding to remove) So be thorough and continue to check your work before moving onto the next step.
Repeat these steps as you move along the rest of your vehicle. Coating the paint, plastics, trim and glass surfaces in the same manner. When layering one hour minimum is required between coats.
Let the coating fully dry/cure for at least 48 hours before allowing it to get wet. The longer it stays dry the better, as it will continue to cure for about 5 days (you CAN drive the car during this time).

FAQ

What’s the difference between Ceramic Wax Pro and Graphene. Can you combo these?

Graphene Matrix is a professional strength coating and is designed to work on its own. You would not want to pair it with Ceramic Wax Pro as they are different chemistries. Graphene requires more prep work and a slightly more attentive installation than Ceramic Wax PRO but provides a much more durable and long lasting result. Ceramic Wax is for those that want the easiest application possible with minimal work required.

Is Graphene Matrix safe for PPF/Clear Bra?

Yes! In fact we recommend applying Graphene Matrix on top of any brand of PPF due to its protective and enhancement abilities. Because Graphene Matrix offers a flexible membrane it will not inhibits PPF’s ability to self heal or resist impacts from road debris. In addition, it will add a noticeably glossy and slick finish that is completely sealed from the elements, reducing the risk of premature aging or yellowing.

How do I maintain the Graphene Coating?

Graphene Matrix can be maintained with any pH neutral wash soap or waterless cleaner. We do recommend using our Ceramic Shampoo as it is designed specifically to both clean and condition the coatings finish to preserve the astonishingly high gloss and water repellency effects. For a topper or in between washes you can use our Detail Spray which is safe on any coating or for even more performance apply Ethos Defy for increased gloss, shine and protection between washes.

Can Graphene Matrix be put on over Ethos Ceramic or does it have to be stripped?

Graphene requires that the paint is completely free and clear of any contaminants or other forms of protection. Its chemistry is designed to work directly with the surface and shed anything on top of it so it would be a stand alone solution.

How much Graphene do I need to coat my vehicle?

One 30ml bottle of Graphene Matrix will provide for 2 coats of a standard size sedan, or minimum of one coat for a large ute/truck.

What's the difference between Ceramic Coatings and Graphene?

Most ceramic coatings on the market are comprised of SIO2 (Silicone Dioxide) which is commonly referred to as Silica, also known as sand or glass. Graphene was discovered in 2004 and won a Nobel Prize in 2010 due to its incredible attributes which have shown to be 100X stronger than steel while remaining flexible and not breaking.

Graphene Matrix utilizes this innovative technology to make a formula that takes ceramic coatings to the next level. Making them easier to apply while providing additional benefits and results.

Graphene Coatings are an evolution on the tried and true Ceramic Coating and are applied in a very similar manner while reducing some of the risks and potential downsides.

Can Graphene Matrix Coating be layered?

Yes it can! In fact we recommend applying 2 layers for maximum performance and longevity. 2 layers ensure that there are no uneven or low spots in the coating and that the surface has been properly covered.

There is no added benefit to applying more than 2 coats to any surface.

If opting to layer the coating, wait 1 hour minimum between the 1st and 2nd coat.

How do I prepare the surface for applying Graphene Matrix?

Clean any loose dust, dirt and contaminants from the surface.
Clay bar any rough embedded contaminants from the surface to ensure no impurities interfere with the coatings properties.
Polish/Compound to remove any paint defects in the form of scratches, swirl marks and oxidation. Graphene Matrix is a semi permanent coating so once applied any defects will remain sealed underneath.
Deep clean any polish oils or residues from the surface that could inhibit the bonding process using Ethos Detox.
Remove any residual water that can be hiding underneath panel gaps, headlights or taillights which could drip out and affect the coatings curing process.

ETHOS GRAPHENE MATRIX COATINGS v2 5 YEARS Durability