{"product_id":"gtechniq-gt1-ceramic-coating-kit","title":"GTECHNIQ GT1 Ceramic Coating Kit | 12 Month Protection","description":"\u003cp\u003eThe GTECHNIQ GT1 Ceramic Coating Kit is an entry-level, all-surface 12-month ceramic protection system. Designed for simple, single-layer application on paint, PPF, trim, wheels, and glass - and can even be applied outdoors in the shade without prior machine polishing.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifespan:\u003c\/strong\u003e Up to 12 months on paint, wheels, trim, and non-wiper glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Surfaces:\u003c\/strong\u003e Paintwork, vinyl wraps, PPF, exterior plastics\/trim, glass, and wheel faces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironment:\u003c\/strong\u003e Can be applied outdoors or outside of a controlled indoor garage setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolishing Requirement:\u003c\/strong\u003e Not required - panel prep focuses on a thorough wash and chemical decontamination rather than heavy correction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Use GTECHNIQ GT1?\u003c\/h3\u003e\n\u003cp\u003eGT1 delivers trusted Gtechniq ceramic coating performance in a fast, single-layer application. The advanced ceramic formula chemically bonds to the surface, creating a durable layer of protection that resists swirl marks, delivers outstanding hydrophobic performance, and tight water beading. Dirt releases more easily, keeping surfaces cleaner for longer.\u003c\/p\u003e\n\u003cp\u003eGT1 is a true all-surface coating - apply it to paintwork, PPF, trim, wheels, and glass with a single product. In the swept area of a windscreen, durability is reduced to several months due to wiper abrasion.\u003c\/p\u003e\n\n\u003ch3\u003eKit Contains\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x 50ml GT1 Ceramic Coating\u003c\/li\u003e\n\u003cli\u003e1x 100ml Panel Wipe\u003c\/li\u003e\n\u003cli\u003e1x MF1 Microfibre Buff Cloth\u003c\/li\u003e\n\u003cli\u003e4x MF6 Microfibre Cloths\u003c\/li\u003e\n\u003cli\u003e1x AP5 Microfibre Applicator Pad\u003c\/li\u003e\n\u003cli\u003e1x Pair of Protective Gloves\u003c\/li\u003e\n\u003cli\u003e1x Application Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplication Steps\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBefore you begin:\u003c\/strong\u003e Park the vehicle out of direct sunlight and ensure the ambient temperature is above 5°C. Working in the right conditions will make the process smoother and help you achieve the best finish.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eStep 1 - Deep Clean Your Car:\u003c\/strong\u003e Even if your car is brand new, carry out a full decontamination wash before applying any protection. This removes transport residue, fallout, and bonded contaminants. You don't need to use Gtechniq products for this stage - what matters is that the surface is completely clean and contaminant-free. Ensure the vehicle is fully dry before moving on.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eStep 2 - Panel Preparation:\u003c\/strong\u003e Put on the supplied gloves and keep them on throughout. Spray Panel Wipe onto the MF1 Microfibre Buff Cloth (lighter grey) and wipe down each panel one at a time. Ensure all streaks and residue are fully removed before progressing to Step 3.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eStep 3 - Apply the Coating:\u003c\/strong\u003e Apply GT1 evenly to the applicator pad - fully covered but not overloaded. Start at the top of the vehicle and work down, using smooth overlapping passes (side to side, then up and down) for even coverage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash time:\u003c\/strong\u003e Allow the coating to sit until it shifts from a smooth film to visible beading - around 30 seconds in warm\/humid conditions, up to 60 seconds in cooler\/drier conditions. Watch the coating, not the clock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidue removal:\u003c\/strong\u003e Using a clean MF6 cloth (darker grey), gently remove residue with light, controlled movements - no pressure needed. Follow immediately with a second clean MF6 cloth to buff to a clear, high-gloss finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection:\u003c\/strong\u003e Under good lighting (use a torch if needed), check each panel to ensure all residue is removed and the finish is even.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinue:\u003c\/strong\u003e Re-prime the applicator pad as needed and work panel by panel. Once all painted surfaces are done, move on to windows, then trim, then wheels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eStep 4 - Cure:\u003c\/strong\u003e Allow the coating to cure for 7 days before washing the vehicle. This ensures full bonding and maximum durability.\u003c\/p\u003e","brand":"GTECHNIQ","offers":[{"title":"50ml Kit","offer_id":49616744644823,"sku":"GT-GT1","price":195.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0005\/5486\/0601\/files\/GTECHNIQGT1CeramicCoatingKit.jpg?v=1787201840","url":"https:\/\/detailingshed.com.au\/products\/gtechniq-gt1-ceramic-coating-kit","provider":"Detailing Shed","version":"1.0","type":"link"}