Labocosmetica PURIFICA Acid pH Snow Foam Pre-Wash

Unclogs ceramic coatings, bringing them back to life
Removes water spots from acid rain or a garden sprinkler
Safe for all surfaces, paint, matt PPF/Wraps, aluminium, plastic, glass
Does not damage the existing layers of protection
Versatility: various dilutions for different needs
Acid pH Value: 3
VDA Certified
Made in Italy

DECONTAMINATING AND REJUVENATING SHAMPOO FOR CERAMIC COATINGS

Labocosmetica PURIFICA is the detailing industry's pioneering acid shampoo, the first in the car detailing sector, and it is still extremely innovative even today. Its primary function is to eliminate the thin layer generated by lime residue that builds up on the vehicles bodywork. This light formation of mineral contamination can sometimes be invisible, but it is the main cause of a loss of brightness because it builds up over time and makes the car appear duller. This effect is particularly evident on black vehicles.

Labocosmetica PURIFICA tackles the problem at the root, delicately and effectively dissolving the limescale deposits on the bodywork. By so doing, it returns vitality to the ceramic coating or the sealant previously applied, enhancing and bringing back to life the water beading. This will allow you to see whether a previously applied ceramic coating or sealant is actually damaged or if the performance was simply hindered by it being clogged.

WHY ARE THE WATER STAINS PRESENT?

If water is not completely removed after rain or washing a car, substances such as dust and minerals present in the water droplets from a garden sprinkler remain on the surface. Minerals such as limestone, which are not visible to the naked eye, cannot be removed with a neutral / alkaline shampoo, which is the main cause of breakage of the layer of the ceramic coating. Therefore, it is essential to use PURIFICA shampoo not only as a rejuvenation treatment for ceramic coatings but also as a routine product for car maintenance.

Labocosmetica PURIFICA Dilution Ratios

Foam Cannon: 1:5 to 1:10

Spray Bottle or Pump Sprayer

Very dirty vehicles: 1:10
Medium dirty vehicles: 1:20 to 1:50
Lightly dirty vehicles: 1:60 to 1:80
Wheels: 1:30

Bucket Wash: 1:100 to 1:400

How to use Labocosmetica PURIFICA

Dispense PURIFICA from bottom to top
Leave on for 2-4 minutes until the foam dissolves, so it can perform the cleaning action
Rinse starting from the bottom upwards
In cases of more stubborn dirt it is advisable to use PURIFICA in spray bottle so as to have more speed in the cleaning phase

Warnings

P102 Keep out of the reach of children.
H318 Causes serious eye damage.
H315 Causes skin irritation.
P280 Wear protective gloves / goggles.
P302 + P352 IN CASE OF CONTACT WITH SKIN : wash with plenty of water.
P305 + P351 + P338 IF IN EYES: rinse thoroughly for several minutes. Remove any contact lenses if easy to do. Continue rinsing.
P332 + P313 In case of skin irritation: consult a doctor.
P337 + P313 If eye irritation persists, consult a doctor.
Contains Quaternary Compound. It can cause an allergic reaction.
Contains: sulphonic acids, C14-16-alkan hydroxy and C14-16-alken, sodium salts, Cocamidopropyl Betaine, Ethoxylated Fatty Amine

Data Sheet

See PURIFICA Safety Sata Sheet here