MTM Hydro Foam Cannon Accessories

We have a complete selection of Foam Cannon Accessories to maintain your foam cannon.

Optional:

PF22 Weighted Filter

SKU: 23.0004

Stainless Steel Filter: A weighted stainless steel chemical filter helps prevent any debris from entering the foamer valve body and ensures that the tube remains at the bottom of the bottle.

MTM PROFESSIONAL FOAMER SUCTION TUBE 9

SKU: MTM-41.0338

MTM Hydro's Replacement suction tube will fit any MTM Hydro Foam Cannon. This tube is 1/4" X 9" in length and is meant to be attached to the hose barb of an MTM Hydro Foam Cannon before installing the bottle.

Used in:

PF22
PF22.2
Original Foam Cannon

MTM Hydro Stainless Steel Foam Cannon Filter

SKU: 36.0226

MTM Hydro's Stainless Steel Foam Cannon Filter is a replaceable maintenance item that fits all MTM Foam Cannons. This product is a woven Italian Stainless mesh that operates as an agitator when the chemical and pressurized stream hits it. To the naked eye, it looks similar to any other cannon filter, but once it is disassembled, there is a distinct woven pattern throughout the filter that was developed by our Italian engineers to ensure a thicker, clinging foam.

From the models we have tested, this Filter will fit in competing foam cannons in addition to MTM Hydro's. Don't expect the same results though, the MTM Hydro Stainless orifice and sequential conical chambers of our Cannons have equal importance to the foam output.

As an agitator, this item will get clogged over time and if you use waxes, the sticky compounds are notorious for causing a faster failure rate. If you suspect a clog, and you remove the agitator, there will be no noticeable issue as the sticky chemical compounds are driven deep into the middle which creates additional back-pressure and inhibits foam creation.

MTM Hydro PF22 Foam Cannon Repair Kit

SKU: MTM-41.5001

MTM Hydro's PF22 Foam Cannon Repair kit is a replaceable maintenance item that will only fit the PF22 Foam Cannon. This kit comes with both, O-rings, Fastener Pin, and a filter for replacement. The Filter is a woven Italian Stainless mesh that operates as an agitator when the chemical and pressurized stream hits it. To the naked eye, it looks similar to any other cannon filter, but once it is disassembled, there is a distinct woven pattern throughout the filter that was developed by our Italian engineers to ensure a thicker, clinging foam.

From the models we have tested, this Filter will fit in competing foam cannons in addition to MTM Hydro's. Don't expect the same results though, the MTM Hydro Stainless orifice and sequential conical chambers of our Cannons have equal importance to the foam output.

As an agitator, this item will get clogged over time and if you use waxes, the sticky compounds are notorious for causing a faster failure rate. If you suspect a clog, and you remove the agitator, there will be no noticeable issue as the sticky chemical compounds are driven deep into the middle which creates additional back-pressure and inhibits foam creation.

See image for verification of items included in this kit.

Video on the Detailed Look at the MTM PF-22 Professional Foam Lance.