MTM Hydro gray 4,000 psi non marking kobrajet hose 15m 23m 30m

Hose kit suitable for the following Pressure washers

Kranzle 7/122, 10/122, 1050P, 1050TS
Active 2.0
Bigboi Pro, BigBoi Duo

MTM Hydro's KobraJet Non Marking Grey Kobrajet Hose is available in various lengths to accommodate all cleaning scenarios. This true non-marking hose now features a thicker inner wall to prevent gashes and ruptures and is great for any pressure washing application.

Kobrajet is manufactured out of high quality components and assembled in the U.S using 'Bite the Wire' technology when installing the 3/8" rigid and swivel fittings.

This technique guarantees that your hose ends will stay in place and will not rupture or blow off during pressure spikes.

These advanced fittings also have a longer life with superior resistance to corrosion due to the salt spray test which yielded results of 125 hours before corrosion was detected; nearly twice the industry standard, meaning your hose will last longer, especially in abusive environments.

Kobrajet hose can handle temp spikes up to 154 degrees Celsius but constant run temperatures should not exceed 135C (Celsius)

Fittings

1x 3/8" Male NPT Rigid End

1x 3/8" Male NPT Swivel End

Please select correct Length of the HP hose

Standard fittings included:

STAINLESS STEEL QC PLUG 3/8FPT 24.0081 ( Hose end going to Washer)
STAINLESS STEEL QC SOCKET 3/8FPT 24.0063
(Hose end going to your QC Gun)
COUPLER BRASS 3/8 QC X M22 F TWIST COUPLER 14mm 24.0448 (Screw This on your Pressure washer ( Perfect for an upgrade to your existing Kranzle Hose.

MTM HYDRO GRAY 4,000 PSI NON MARK KOBRAJET HOSE 15m 23m 30m lengths