Maxshine M15 Pro Dual Action Orbital Polisher - 5in Plate, 15mm Throw, 1000W

The dual action orbital polisher M15 Pro is the flagship machine of MaxShine. Its optimized orbit range of 15mm and a 5-inch backing plate size make it adaptable to most detailing jobs, correcting paintwork faster and easier. This premium dual-action orbital polisher effortlessly removes light scratches and swirl marks while enhancing shine. Take your detailing projects to the next level with the M15 Pro.

The dual action orbital polisher embraces a 15mm throw with a 5-inch backing plate and 1000W for doing all the hard work
The adjustable 6-speed dial allows for controlled and precise polishing
Convenient locking trigger and ergonomic handle maximize comfort
The elongated 13-ft power cord offers a long reach and wide working area for the M15 Pro

SONAX PROFILINE Cutmax Heavy Cutting Compound

Designed to achieve the highest cutting and polishing results without severely damaging the clear coat.Sanded areas up to P1500 can quickly and safely be removed with excellent gloss effect.

Directions for use:

Apply a small amount (3 or 4 Dime-sized drops) of polish onto the SONAX Polishing Pad.
Polish the surface at a low rotating speed (800 rpm) for approximately 20-30 seconds, applying 15-20 pounds of pressure. After 30 seconds, remove pressure completely using only machine weight, increase machine speed (1200 RPM) and continue polishing for 45-60 seconds. When finished polishing, wipe down the paint surface with a Microfiber Cloth.

SONAX PROFILINE Perfect Finish One Step Polish

Sonax Perfect Finish polishes and removes scratches, sanded paint defects such as dust inclusions, paint runs, and water spots in a single step - No wet sanding or compounding is necessary before use. Removes marks of P2000 grit or finer, recommend applying with a rotary polisher or DA with Medium cut Polishing pad.

Directions for Use:

Apply a little of the product directly to the sanded spot.
Polish the area at the lowest rotational speed (ca. 800 rpm) with the green Polishing pad (493 000) for 10 sec. Tilt the machine a little bit.
Afterwards, increase to medium rotational speed and allow the machine to run, now exerting only moderate pressure.
Guide it swiftly over the surface to avoid heat developing beneath the polishing pad.
Remove the polish residue with a microfiber cloth.

Pad Option 1: Maxshine High Pro Polishing Pads

Full set of polisher foam pads for heavy cutting, refined cutting, polishing, and finishing High profile foam pads designed to eliminate scratches, swirl marks, and chemical oxidation Professionally crafted featuring a center cut and tapered edge for proper heat dissipation The pads’ optimised thickness provides seamless surface correction and safe contouring along curves Compatible with rotary and dual action polishers equipped with hook and loop functionality.

Cutting Foam Pad: With a balanced foam density, this pad offers exceptional versatility across various paint correction tasks. Unlike other foam pads, its moderate density strikes the perfect equilibrium, making it ideal for general cutting needs without compromising on finesse. This pad's precisely engineered structure ensures a controlled and efficient cutting action, effectively eliminating moderate paint imperfections while preserving the surface integrity.
Polishing Foam Pad: The lower-density foam of this pad caters specifically to polishing tasks. Its unique composition offers a gentle touch while maintaining ample firmness, making it the optimal choice for refining surfaces after cutting or heavy correction processes. Unlike other foam pads, this specialised density ensures an even distribution of polishing agents, allowing for a flawless, high-gloss finish with a mirror-like shine, without risking over-polishing.
Finishing Foam Pad:Designed with an ultra-soft, ultra-fine foam density, this pad is specifically tailored for the delicate art of finishing. Its ultra-low density ensures a gentle touch on surfaces, making it the ultimate choice for applying final polish, wax, or sealant. The specialised construction of this pad guarantees an impeccable, swirl-free finish, preserving the brilliance of the just-polished paintwork without any risk of marring or overworking the surface

Option 2: Buff and Shine Uro-Tec Scultped Edge Pads

High performance, yet cost-effective foam pads
Uro-Tec Foam Pads are constructed out of super durable open-cell foam which allows long cycle times without reduction in performance, and the ability to dissipate heat quickly. This results in a pad that lasts longer without any loss in cutting or finishing abilities. They were designed and engineered from the ground up for use with long throw orbital polishers.

From the unique foam construction to the thickness of each pad, Uro-Tec Foam Pads will blow you away with how smooth they are on your long throw polisher and with Buff & Shine’s legendary durability, Uro-Tec Foam Pads will be one of the smartest investments you’ll make in car care.

The dense foam construction of the Maroon Pad makes it perfect for use with one-step compounds and polishes.
The closed cell foam construction of the Dark Blue Pad is ideal for use with a medium cut polish or a one-step/cleaner wax.
Use the Yellow Pad with finishing polishes or, for darker colors, one-step polishing compounds.

Option 3: Lake Country SDO Foam Pads

Lake Country SDO Pads have been designed to offer the same great engineered foams as the HDO line, without the dual layer constructions. Lake Country SDO Pads are designed for use on all DA polishers with a centre ventilated backing plate. Lake Country SDO Pads feature a centre hole that provides a tunnel to release and dissipate heat from the foam and reduce surface temperatures and risk of damage to the paint.

SDO Blue Foam Heavy Cutting Pad
Firm, medium density foam for scratch and defect removal. Use this pad with polishes and swirl removers. It’s an all around pad that will work on most light to moderate imperfections.

SDO Orange Foam Polishing Pad
Less dense foam formula for the application of cleaner waxes and light polishes. This pad has very light cutting power so it’s perfect for the removal of light defects and micro marring.

SDO Black Foam Finishing Pad
The composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has a very little cut and will apply thin, even coats of waxes, sealants, and glazes, and ultra fine polishes.

Polishing Professional Kit1 Maxshine M15 PRO & Sonax