GTECHNIQ EXOv5 Ultra Durable Hydrophobic Coating

durability

Quick Overview

18-24 months durability
Easy to apply (one layer product)
Adds gloss, water and dirt repellency

Why Use Gtechniq EXOv5?

Using composite siloxane technology, EXOv5 makes water spots and road grime easy to remove, offers excellent resistance to all wash chemicals and can help withstand micro-marring. It produces a high-gloss, warm-looking, extremely hydrophobic finish.

It has a consistent film that is more durable and resistant to road salt and wash chemicals than its predecessors. Application has been improved with just a single layer of product required, with a slow flash-off time, giving more time to achieve a perfect finish.

All of the above combined with the introduction of a good degree of swirl resistance means EXOv5 represents a significant leap forward in Last Surface Protection (LSP) technology

PLEASE BE AWARE THAT WE WILL NOT BE RESPONSIBLE FOR ANY LOSS OR DAMAGE SUFFERED BY YOU AS A RESULT OF INCORRECT APPLICATION OF THIS PRODUCT

Features & Benefits:

Extreme hydrophobicity – water slides off treated surfaces
Forms a hard film that makes water spots easier to remove
Resistant to highly alkaline or acidic wash solutions
Now aids the prevention of micro-marring
Repels dirt, oils, & fallout
Enhanced durability – lasts for up to 2 years
Can be used as a stand-alone coating or as a top coat
For cars up to medium estate (i.e. BMW 3 series touring) – select 30ml
For larger cars, select the 50ml

Included in Kit:

1 x EXO v5 – 30ml or 50ml (please select from menu)
1 pair of nitrile gloves
1 x AP2 Ultra Soft Foam Filled Applicator Pad
1 x Master Instruction Leaflet
1 x WS1 GTECHNIQ Window Sticker

Instructions:

EXO v5 can be applied as a stand-alone sealant or as a top layer for Crystal Serum Light (CSL) or C1 Crystal Lacquer (recommended particularly for darker colours, easy to mark paintwork or if added swirl resistance and durability are required).
Leave between 2 and 12 hours for C1 to cure before applying EXO v5
Can be applied immediately over CSL (start at the same point and follow the panels in order). Do not leave CSL for longer than 24 hours if planning to apply EXO v5.
Ensure vehicle is clean and dry, and the paintwork is swirl-free and prepared with Panel Wipe (not necessary if applying over C1 / CSL).
Ensure panel is warmer than 5 degrees Celsius.
Apply 5 – 10 drops of EXO v5 to the supplied applicator and work the liquid into the pad to get an even saturation.
Apply to the panel using overlapping strokes, working an area of around 60cm x 60cm at a time.
If the panel is 15 degrees C or lower, allow EXO v5 to cure for two minutes, then remove residue with a soft clean microfibre. For temperatures between 15 and 25 degrees C, allow one minute to elapse prior to buffing. For temperatures higher than 25 degrees, buff immediately.
With a new microfibre, buff panels again to ensure all residue entirely removed.
Apply a second layer of EXO v5 immediately, to ensure ease of buffing
Allow EXO v5 to cure for a minimum of 12 hours prior to exposing it to rain.
Allow at least 1 week before washing your vehicle.

Storage:

Unopened bottles of EXO v5 have a 12-month shelf life from time of purchase
Opened bottles of EXO v5 should be stored in a cool, dry area out of direct sunlight
Opened bottles have a maximum life of 3 months

GTECHNIQ EXOv5 Ultra Durable Hydrophobic Coating (24 Month Durability)