Maniac Line Foam Gun Prewash

Eliminates 90% of dirt allowing you to wash your car without the risk of creating swirls or micro-scratches
Can be used with pump sprayer or foam gun
Will not affect ceramic coatings
Excellent economy thanks to high dilution ratios
Eliminates smog, road dirt, bugs, organic residues of plants or birds
Powerful and safe foaming prewash with dry and compact foam
Cleans and protects all external surfaces
Made in Italy

Maniac Line Foam Gun Prewash cleans and protects all external surfaces. Eliminates smog, road dirt, bugs, organic plant or bird residues. Excellent economy thanks to high dilution ratios. It can be used frequently because it respects previously applied protectants, including nanotechnology-based or ceramic coatings.

PREWASH is the fundamental step that makes all the difference: it will in fact remove up to 80% of the coarse dirt present on the bodywork, without mechanical action, therefore without touching it.

Dirt particles firmly anchored to the bodywork, if you do not carry out a correct pre-wash, during the contact wash the wash mitt will be at risk of creating micro scratches ("swirls") or worse deep scratches.

Only after having carried out a correct prewash can you proceed with manual washing in total safety.

Even if you wash the car by hand, carefully wash after wash, you see micro-scratches and lines appear on the bodywork? And when you empty the bucket, have you ever found dirt residues, such as soil at the bottom?

If the answer is YES, it means that no one has ever taught you the correct washing procedure: Let's see it together:
Following the correct washing procedure, we start with cleaning rims and tires and their decontamination.

Maniac Line Foam Gun Prewash Dilution Ratios

Foam Gun (Summer): 1:10 for a final output of 1:100
Foam Gun (Winter): 1:5 for a final output of 1:50
Pump Foamer (Summer): 1:100
Pump Foamer (Winter): 1:50

How To Use Foam Gun Prewash

It is recommended to use the product with a foam gun, but it is also excellent for pre-washing using a manual pump foamer.

Foam Gun:

Using a high-pressure foam gun, in winter dilute the product with a ratio of 1:5, for a final-output dilution ratio of around 1:50.

Using a high-pressure foam gun, in summer dilute with a ratio of 1:10, a final-output dilution ratio of around 1:100.

Spray a thick layer of foam on the vehicle and wait for it to run off (this may take up to 5 minutes).

Rinse the vehicle from top to bottom.

Pump Foamer:

Winter dirt 1:50 (2 caps of the product in 1 litre of water).

Summer dirt 1:100 (1 cap of the product in 1 litre of water).

Spray the product on the vehicle and wait 1 minute without letting the product dry on the bodywork, then rinse.

Rinse the vehicle from top to bottom.

FAQ

Can I use the product even without a foam gun?

Yes, you can use the product with a manual pump foamer. In this case, dilute as follows:

We recommend that you apply the product always from the bottom up, working on half the car at a time ensuring that the foam is never allowed to dry on the surface.

Can I clean it without a pressure washer?

Yes, although you won't achieve the same results. You will however, get the emollient action that helps soften the dirt, making it easier to remove later.

Can I apply the product directly onto the dirty surface or do I have to completely wet the car first?

Our advice is to wet the car first to cool the surface, especially in the summer season and to remove dust and coarse dirt, thereby increasing the safety of use.

Once the product has been applied to the surface, can I work with a brush or sponge?

No, because in this stage you are going to detach the coarse dirt from the surface, even strongly anchored dirt. Let the product work and take advantage of its chemical action. After you have rinsed it off, you can then proceed with the thorough washing of the car using a sponge, mitt and brushes for the most difficult areas and features such as emblems or grids.

What are the key steps before proceeding with the prewash of the car?

We always recommend that you start washing from the wheels and tyres with "Wheel & Tyre Cleaner" and remove any iron contaminants with "Iron Remover"

After the prewash, what can I use for the hand wash with the mitt?

For a maintenance wash, use the Neutral Foam Shampoo. For dark or wrapped cars, use "Black & Wrap Shampoo". Use "Ceramic Shampoo" to add a ceramic action to your wash and thereby achieve greater protection and a water repellent effect.