Optimum Protectant Plus Interior - Leather, Vinyl and Plastic

Optimum Protectant Plus cleans, restores and protects leather, vinyl and plastic moulding surfaces. Protectant Plus contains a balance of cleaners, penetrating oils, reactive polymers and UV inhibitors to restore original colour to these surfaces, protect against and hide any scratches, and prevent sun damage.

Just like automotive paint systems which have undergone major changes in technology, automotive leather and vinyl surfaces have also had some considerable improvements in the past decade. Nearly all automotive leather surfaces are treated with special chemicals to provide resistance to scratching and marring and increase durability and protection from weathering. The chemistry of vinyl surfaces has improved dramatically also, to give these surfaces a leather look and feel. The vinyl surfaces are also treated with similar chemicals as those used for automotive leather to increase their durability and optimum protection from weathering. Over a period of months, these protective chemicals are lost from the surface.

Optimum Protectant Plus cleans and replenishes these chemicals while adding UV protection. Most over-the-counter leather and vinyl protectants leave an oily film behind which gives them a glossy look and slick feel. Since these products are not absorbed into the surface, they last only a few days and act as a dust magnet. Optimum Protectant Plus will keep leather supple with a natural satin finish. It helps reduce cracking on leather and vinyl surfaces, as well as reducing scratching and marring. Protectant Plus penetrates and adheres to these surfaces, therefore it does not make them oily or slick and provides lasting protection.

P & S Leather Treatment

• Conditions & Protects Leather
• Restores Natural Lustre
• Infuses Leather Scent
• Leaves Natural Finish

Make sure your Leather is cleaned before conditioning.

1.  Use the P&S Xpress Interior Cleaner All Surfaces  or the Carpro Inside To clean your Interior

2. Use a quality Sponge by  The Rag Company – Microfiber Interior Detailing Sponge Applicator  to apply the Leather conditioner

3. Apply the Leather treatmentt with the applicator above

3. To save time use Leather & Vinyl Interior Scrub Brush [High Quality] Can also be used to clean the leather

 Description 

Leather Treatment Performance Leather Conditioner & Protectant revives leather and infuses interiors with an intense scent that lasts and lasts. Leather Treatment is the ideal product for reconditioning lifeless weathered automotive leather seats. Due to normal use over time, seats become dry and loose their natural luster. Leather Treatment is a perfect solution to restore leather seats. 

P&S Shine All:Tyre & Interior Dressing ***HIGH GLOSS***

 The results you’ll receive when using P&S Shine All Performance Water Based Tire Dressing are second to none!

P&S Shine All Performance Water Based Tire Dressing leaves behind an extremely High-Gloss shine on the rubber it is applied to.

The shine and protection provided by P&S Shine All Performance Tire Dressing are long-lasting and will always leave your car looking amazing. 

P&S Shine All can be diluted to be used on other rubber surfaces on the exterior or even the interior of any vehicle.

 Features and Benefits:

• High gloss
• Sprayable dressing
• Water-based tyre dressing
• Easy application
• Formulated for rough tyre surfaces
• Durable shine
• Excels as an interior dressing

Directions:

1. Clean and dry the area to be dressed prior to product application.
2. Spray on or hand apply with an applicator to the tyre.
3. Allow to dry to a glossy finish and wipe off excess material. 

 Features and Benefits:

• Durability: 1 to 2 years
• Resists dye transfer
• Hydrophobic & Oil Phobic
• Stain resistant
• Chemical resistant
• UV resistant
• Easy clean" Preserves colour and resists fading

Materials:

• Traditional Finished Leather
• Vinyl
• Synthetic leather
• Interior plastic and Wood
• See precautions
• Consumption:

30ml used per average vehicle (5ml = 1sq m)

IMPORTANT NOTICE:
On white leather test first on inconspicuous area for 24 hours before applying the whole interior leather surface.

DO NOT USE ON VOLVO CARS LEATHER SEATS

Precautions:

Note: Currently there are a variety of leather and vinyl materials with a variety of coatings used by many auto manufacturers. It is not possible to acquire or test this number of surfaces, therefore, the user must confirm viability in an inconspicuous area on any surface.

Directions:

• Thoroughly clean all dirt, moisture, and oils from the surface with non-oily, interior safe cleaner that leaves no sealant or dressing 
• By Using CARPRO INSIDE - LEATHER & ALL SURFACES INTERIOR CLEANER CONCENTRATE
• Wipe with a water damp towel to remove residue from your cleaner if needed
• Pour a few drops on white cotton applicators or on the sponge applicator 
• Work CQuartz Leather into the surface including all creases, and texture
• Gently wipe off any excess within 2-3 minutes (may vary with temps and leather type)
• May layer after 30 minutes from the start of the first application
• Touch dry after 10 min / Avoid water for 4 hours / Fully cured in 3 days

Aftercare:
Wipe with damp cotton cloth when soiled

P&S Essentials Leather Car Care Kit Bundle

All you need to effectively deep clean and moisturise your Car leather & it is also quick to perform the work. This kit will cut down the time you spend on cleaning the interior.

 This kit includes all you need to clean and protect your car interior.

 Features and Benefits

• Quick and simple to clean interior
• Cleaning scrub brush included safe on all surfaces
• Jitterbug Motion Cleans Vinyl and Leather of Dirt, Grime and Mildew
• Gets the Hard to Clean Deep Grain on Leather and Vinyl
• Xpress  will cleans without drying, discolouring  or damaging the cleaning surface and, after use, surfaces will feel clean and residue free.
• With the Microfibre applicator 
• Apply the Leather Conditioner with the applicator provided Included in the kit

Included in the Kit

Interior cleaning

1 x P&S Xpress Interior Cleaner All Surfaces

2  x  Microfibre Cloths – 40cm x 40cm – 330 GSM – Blue

1 x Leather & Vinyl Interior Scrub Brush ***NEW***

Leather Application

1 x P & S Leather Treatment

1 x The Rag Company – Microfiber Interior Detailing Sponge Applicator – BLUE This is used to apply the Leather conditioner

GTECHNIQ I1 Smart Fabric Coating, Protectant, and Waterproofer

• Available in Standard and Antibacterial (AB) versions

• I1 Smart Fabric protects all kinds of fabrics from water and oil based stains. It is breathable and extremely durable and fluorocarbon free.
• I1 Smart Fabric makes ordinary fabrics waterproof and easy to clean. Use it to prevent soaking, swelling or rotting on any fabric. From sails, tents and awnings to your cars soft top and interior.
  
• For added protection against the germs that can find their way into your vehicle's interior, use our I1 Smart Fabric AB (Antibacterial) version!
  
• With added_BioCote antimicrobial technology, C6 Matte Dash Antibacterial treated surfaces will kill 99.9% of bacteria.
  
• The nano particles of I1 coat each fabric fibre individually, leaving the texture unaffected, allowing the material to breathe. This means stale air will still be able to escape, while repelling water and oil-based liquids.
• I1 Smart Fabric is also colour safe so will not tarnish any finishes but we do recommend testing a small area of fabric before use.
• I1 Smart Fabric V2 leaves no remnants of a spillage and moisture simply falls off a coated surface. Laboratory testing reveals that I1 V2 repels water to the highest standard set by the American Association of Textile Chemists and Colorists (AATCC) ISO 5.
  
• Rigorous was testing reveals the GTECHNIQ fabric protection remains at its full performance level after being washed on a 40 degree cycle, and even after five washes still performs better than our original product.
  

Features and Benefits

• 6 to 18 months durable water repellency
• Fluorocarbon free
• Natural feel to treated fabric
• Available in 250ml, 500ml, 1l ,and 5l
• Available in Standard and Antibacterial (AB) versions

Instructions:

• If using on an interior surface, use I2 TriClean to prepare the surface you are going to treat
• For exterior use, use W5 Citrus All Purpose Cleaner neat for dirty surfaces, or dilute at a ratio of 5:1 with water for less soiled areas
•  Make sure the surface you have cleaned is thoroughly dry (for best results 48 hours in good drying conditions) before applying I1 Smart Fabric. For the optimal impregnation of I1 into your fabric, its moisture content must be below 15% which is significantly dryer than touch dry
•  Shake well before use and wear gloves
•  Apply at a temperature of 5°c or above, in a well ventilated area
•  Use out of direct sunlight
•  Apply by spraying evenly from a distance of about 15cm ensuring thorough saturation of the surface you are covering.
•  Make sure your application is thorough as once Smart Fabric has dried, you cannot apply a second coat, as the first coat will repel additional product
•  Avoid over spraying on surrounding substrates, if this happens, wipe immediately with a MF1 ZeroR Microfibre Buff Cloth. Also wipe any excess from the fabric with an MF1
•  Leave to dry for 24 hours, after this time the full effectiveness of the product will be achieved
•  Store in a cool, dry place
•  Use within 12 months of opening

Smart Fabric V2 Test results

Gtechniq I1 demonstrated on a cabriolet roof

GTECHNIQ C6 MATTE DASH AB INTERIOR TRIM PROTECTOR WITH ANTI-BACTERIAL

• C6 Matte Dash is specifically designed to protect dashboard and door card materials including vinyl, plastics and rubberised finishes.
• The coating adds abrasion resistance and UV protection to treated surfaces and with added Biocote® antimicrobial technology, treated surfaces kill 99.9% of bacteria.
  
• C6 will not affect the gloss of your car’s trim and leaves a natural feel.
  
• This product should not be used to protect suede, nubuck or any fibrous finishes.
  

Features and Benefits:

• Designed to protect dashboard and door card materials including leather, vinyl, plastics and rubberised finishes
• Adds abrasion resistance
• Makes treated surfaces dirt, water, static and UV repellent
• With added BioCote® antimicrobial technology,treated surfaces will kill 99.9% of bacteria 
• Non-sticky - does not attract dust
  
• Long-lasting abrasion resistant coating
• Protects surfaces from UV-induced fade
  
• Leaves a satin finish with a natural feel

Directions:

• Shake well before use and wear gloves
• Pre-clean areas to be coated with a  Microfibre Cloth and if required a 1:20 dilution of W2 Universal Cleaner Concentrate 
  
• Empty bottle used for dilute the W2 Universal Cleaner here
• Make sure the surface is thoroughly dry before using C6
• Apply using circular movements with a clean MF Cloth or an Applicator
• Buff residue away immediately after application with another clean MF Cloth
• For optimum results apply two coats of C6 Matte Dash allowing 24 hours between applications
• For optimum protection re-apply C6 every 6 months
• C6 Matte Dash has a shelf life of 2 years from purchase, for best result, use within 1 year of opening

GTECHNIQ L1 LEATHER GUARD AB PROTECTANT

Wowo's Interior Finisher

Wowo’s Interior Finisher is the best thing for your interior plastics and vinyl surfaces! The water based formula with UV inhibitors and anti-static capabilities and a fresh scent means this is exactly what you want and need to protect your interior. It leaves a nice satin finish, but if you want a shiny surface just add a little more and wipe it down!

• UV PROTECTION: Helps to Protect your Interior Plastics.
• ANTI-STATIC: Keep Your Car’s Interior Cleaner Longer and Protected.
• SAFE FOR ALL SURFACES: For Use on Plastics, Vinyl, and Leather.
• NON-GREASY FORMULA: Water Based, Fresh Interior Scent

 How To Use:

1. Give the bottle a good shake
2. Make sure the trigger sprayer is pointing away from you, unless you want to eat or wear Interior Finisher(we don't advise this)
3. Spray on the affected area you wish to shine and protect
4. Wipe off with a high quality Microfiber towel
5. Apply a second coat for extra shine 

Wowo’s LEATHER CLEANER is Step One in the Wowo’s Leather Cleaning System! LEATHER CLEANER will target unwanted fats and oils within the leather and restore it to an OEM Matte Finish appearance. Before applying Wowo’s LEATHER CLEANER, we always recommend testing on an inconspicuous area first for color fastness. From there, liberally spray the target areas and work the product into the leather with a clean Microfiber Towel. Flip the towel as needed and wipe dry. For deeper stains (such as Blue Jeans dye transfer), agitate the product with a soft bristle brush and wipe dry with a clean Microfiber Towel. Once your leather is cleaned and restored, we highly recommend protecting it with

• A SERIOUS LEATHER CLEANER: Wowo’s LEATHER CLEANER Can Be Used On ALL Things Leather in Your Vehicle’s Interior
• TARGETS FATS & BODY OILS: Leather Seats Looking Shiny and Greasy? Leather Cleaner Will Return Your Leather To Its Desired New Looking Matte Finish
• LATHER UP THE LEATHER: Creates a Foamy and Effective Lather With Soft Brush Agitation
• MATTE LOOK AND LEATHER SCENT: Leaves An OEM Like Finish With a New Leather Scent   

How To Use:

1. Give the bottle a good shake
2. Liberally spray the leather areas which you want to clean
3. either work into the leather using a high quality Microfiber towel or use a soft nail brush and work into troubled areas
4. Wipe the remaining residue off with a high quality Microfiber towel
5. Repeat if necessary. This product should be used in conjunction with Wowo's Leather Cream for best results