Scholl Concepts S20 is an amazing compound and polish all in one.

This is not a  traditional all-in-one that includes a wax, fillers or sealant as part of the formulation. This 1-step is designed to do aggressive compounding and polishing to almost complete perfection. 

The S20 has the ability to cut and finish in a single step on both hard and soft paints alike when combined with the appropriate pad. With the new easy clean update, you get the same cut, finish and work time but provides a much easier wipe off of the product at the end of the polishing run. 

S20 contains no fillers or bulking agents in order to mask defects, it is a true one step solution that will surprise you with its ability to quickly remove defects and leave a refined polished surface in one step. 

KEY BENEFITS

• Cut and finish in one step with no fillers.
• Use as a polish or as a cutting compound depending on pad used.
• Capable of removing 1500 to 2000 defects with ease 
• Finishes with an incredible gloss even on soft paints
• Removes 2000-1500 grit defects
• Saves time and steps
• Won't stick to paint even on hot surfaces
• No dusting
• Free of wax, silicone, and toxic solvents
• Body Shop Safe - Silicone and wax free
• Made in Germany

CarPro Clearcut Compound

CarPro ClearCut is the compound you reach for before your finishing polish, such as Reflect!

CarPro ClearCut was developed to QUICKLY remove defects whilst allowing you to easily view your work through the polish.

Within 1-2 passes you can begin to watch the defects literally disappear before your eyes as the compound begins to become transparent. This allows you to continue cutting as needed OR stop as soon as the defects are removed and you find yourself ready for a finishing polish. In some cases and with the correct combinations this incredible next-gen compound may also be used as a 1 step product!

CarPro ClearCut is an extremely fast acting liquid abrasive built from the ground up for efficiency, performance, and speed!

Unlike other popular compounds on the market, ClearCut doesn't fool you by swelling the paint or hiding water spots and scratches just to see them re-surface later! With NO fillers ClearCut wipes off fully and a simple Eraser wipe down EASILY removes any lubricants.

Unlike compounds of the past, CarPro ClearCut has its own method of application for optimal results... reversing the traditional "heavy to light" method, we start with lighter pressure and finish heavy! Additionally, I find myself using a bit more compound with ClearCut than I do with traditional compounds.

Say goodbye to hours of wasted time and hello to efficiency and less labour costs!

This compound provides extraordinary cut, and an impressive finish.

With the capability of removing scratches as deep as P1000, CARPRO ClearCUT is the PERFECT tool for a 2-step job on any paint or even 1-step on many medium to hard paint. 

 FEATURES AND BENEFITS

• Next-Gen Compound
• Extremely fast cut
• Rapid cut
• Hologram free
• No wax, fillers, or silicone
• Low dusting
• Removes p1000 grit and up
• Body shop safe
• Excels with D/A, rotary, or by hand
• Compatible with a variety of foam, microfiber, and wool pads

DIRECTIONS:

1. Prime (clean dry pad) with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product
2. Spread product across a section
3. Raise speed to HIGH speed with LOW pressure 
4. Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass
5. Increase pressure with each pass, finishing down with heavier pressure 
6. When scratches are gone or polish has been worked through, wipe clean with a microfiber towel
7. Clean Pad
8. Move to next section -> Apply 6 - 8 pea size drops to pad and repeat steps 2-7.

 Carpro forum tips:

SCHOLL CONCEPTS S3GOLD XXL CUTTING COMPOUND

S3 Gold XXL is the next step in a true 1 step compound revolution by Scholl Concepts! Based on the original S3 Gold, S3 XXL finishes with the same abilities however INCREDIBLY now offers more cut than even S3 Gold!!

It is a highly efficient one-step polish based on highly refined aluminum oxide. Thanks to Intelligent Powder Technology (iPT) the high-performance S3 XXL compound easily removes deep scratches and daily wear and tear while generating a long-lasting deep gloss! S3 XXL works great on all paints and easily removes damage from even the hardest scratch resistant paints. 100% body shop safe, S3 XXL contains NO silicone, wax, or toxic solvents and allows you to easily correct damage and finish down in one step! Scholl S3 XXL is also extremely user-friendly with no dust and easy wipe off.

The unique Intelligent Powder Technology (iPT) utilized in Scholl S3 Gold XXL works by making full use of the highly refined abrasive particles from the second you turn on the machine. These aluminum oxide particles cut through the defects quickly and break apart into fine nano-polishing abrasives soon after to allow you to finish down to an excellent gloss.

Features and benefits

• Excellent cut
• Removes 1500 Grit and polishes down to a brilliant high gloss finish
• Saves time and steps
• Won't stick to paint even on hot surfaces
• Virtually no dust contamination
• Intelligent Powder Technology (iPT)
• Free of wax, silicone, and toxic solvents
• Body Shop Safe - Silicone and wax free
• Versatile - Dual Action, Rotary, or Hand
• Use on multiple paint types

Specifications:

• Origin: Germany
• Color: White
• Cut: 6.5/8
• Gloss: 6.5/8

Application with Dual Action:

1. After spreading across 2-2.5 Ft area on low speed, work at speed 4-5 applying moderate pressure through the first half of the cycle.
2. Next use progressively lighter pressure until finished down. Machine speed varies based on machine and paint.
3. Once completed, buff off the faint residue using your microfiber towel.
4. Clean Pad
5. Use only 3-5 pea size drops for each additional section (depending on pad size), repeating steps 1-4 after each section.

Application by Rotary:

1. After spreading, work at 1100-2000 rpm.
2. Halfway through cycle slow speed progressively lower and continue until polish has broken down.
3. Once completed, buff off the residue using your microfiber towel.
4. Clean pad with a brush
5. Use only 2-4 pea size drops for each additional section (depending on pad size), repeating steps 2-5 after each section.

Tips:

Use with Scholl Concepts Spider pads for incredible results!
For extreme gloss follow with Scholl S40 Finishing Polish or CarPro Reflect
If coating the vehicle with CQuartz, follow Scholl S3 XXL with CarPro Reflect Finishing Polish