Kit Includes:

1. 1 x CQuartz UK Edition  30ml or 50ml bottle (15ml+/- per coat)
2. 1x 100ml bottle of CarPro Reload Silica Spray
3. 1x  Applicator Block
4. 5x 4" Microfiber Suede Applicators
5. 1x 16" Microfiber Suede Towel

Features:

This is the best ceramic coating Kits for cars. It includes everything you need to Wash, Decontaminate, Polish, Coat and add Slickness to your finish and protect it for years 

Transform and protect your pride & joy with this new paint protection bundle, offering breathtaking gloss, superior protection, and amazing water beading. Keeps your car cleaner for longer, easier to maintain and protect from the elements for years to come. 

 Give your vehicle the ultimate protection with this new Paint Protection Bundle. This bundle contains everything you need to completely wash & decontaminate your paintwork, and apply innovative glass coating protection to bring your vehicle to the next generation of car care.  

 Key Benefits:

1. Cquartz UK 3.0: Extremely deep gloss that lasts!, Easy maintenance with "self-cleaning" properties (Stays cleaner than other products on the market) 70% Quartz with 99.9% purity

2. Protection and gloss superior to that of competitor "professional coatings" but easy to use for all detailers and DIY's
3. 70% Quartz with 99.9% purity
4. An extremely deep gloss that lasts!
5. Easy maintenance with "self-cleaning" properties (Stays cleaner than other products on the market)
6. Resistance to wash induced marring, bird dropping damage, stains, high or low temperatures, and traffic film
7. Repels UV rays, water, oils, dirt, and contaminants
8. Optional: SCHOLL CONCEPTS S20 BLACK Polish. This is designed to do aggressive compounding and polishing to almost complete perfection.  Depending on the pad used, you can control how aggressive you go.

Kit Includes:

• 1 x Cquartz UK 3.0 30mL Kit (2019 V3.0) included in the Kit:
• 1x 30ml bottle of CQuartz UK Edition (15ml+/- per coat)
• 1 x 100ml bottle of CarPro Reload Silica Spray.
• 1x Applicator Block.
• 5 x 4" Microfiber Suede Applicators
• 1x 16" Microfiber Suede Towel

• 1x CarPro Reset 500 ml (Shampoo): Reset breaks down road grime and traffic films with the power of an alkaline cleaner, whilst being as gentle on the surface as a pH-neutral shampoo.
• 1x CarPro Eraser 500ml: Remove any leftover polishing oils with Eraser so the Ceramic Cquartz Coating can properly bond.
• 1x NV PURIFY 500ml: Helps Safely Dissolve Iron Contaminants & Fall Out, this is used as a clay lubricant.
• 1x Concours CLAY 200g: Allow for the safe removal of all contaminants such as industrial fallout, oxidation from acid rain, or exhaust pollutants.
• 4 x MF 330GSM Paint protection and removal cloth (2 Red 2 Yellow): Wipe off the residue from the CquartzUK with the Red or Yellow cloth.
• 2x MF (Green cloth) (multi-Use Cloth) Can be used for Polish or eraser to wipe down prior to coating. Green MF can be used with reload also.
• Optional: 1x SCHOLL CONCEPTS S20 BLACK 1-STEP COMPOUND Polish 500g

Directions:

1. Wash with Reset or any other shampoo ( Avoid any shampoo with gloss enhancers or Wax)

2. Before you dry the car fully, start Spraying NV PURIFY onto the paintwork, (approximately  60 x 60cm area) leave on the vehicle for a 1 minute  or until you see the surface change colour.

3. Gently slide the clay bar across the surface, you may require to spray more NV Purify if needed.

4. After the car has been successfully decontaminated using NV PURIFY with the  CLAY bar move to next section.

5. Wash the car again with CarPro Reset to get rid of all impurities off the surface.
6. Perform hand or machine polishing (if needed) the surface has swirls.
7. After the decontamination process is complete, and any polishing stages have been completed.
8. Wipe the car down with CarPro Eraser. (using Green Microfibre Towels)
9. Begin to apply CarPro CQUARTZ UK 3.0 (2018) onto the car through the use of the supplied suede applicators and block. Level the coating as per the instructions on the Cquartz UK product page. Also, use the Red/Yellow Supersoft Microfibers to wipe off the coating, and get ready for a glossy, and protective layer.

Note: If you don't feel confident after reading our instructions on both this product page and the CQUARTZ UK page, it may be a good idea to do some of your own research on CQUARTZ UK, watching some videos on how it is applied, and reading some different accounts and descriptions to give you a great understanding on the process and whats involved. If you require any additional assistance in applying CQUARTZ, don't hesitate to email us and we will be able to help you out with the procedure.

You may also email us and request a phone callback. We will be able to help you if you have any concerns applying the coating.

Aditional info is located under the documents section on the website.

CarPro Dlux is the most advanced plastic restoration coating available today!

Made from quality high-grade organic silane, contains more than 50% pure silica! Unlike other trim products CQ Dlux restores and protects plastic for two years or longer utilizing a unique nano composition which allows it to chemically bond to the pores of plastics! Additionally, it is HIGHLY resistant to extreme temperatures making it the perfect companion for protecting wheels. 

DLUX Long Life Trim Coat was engineered specifically for coating plastics as well as rubber and metal. It can be used on almost any wheel finish including clear coated, chrome, aluminum, and plastic. Carpro Dlux leads the entire market when it comes to exterior plastic trim protection and it darkens the trim without leaving any unwanted slick greasy residue.

Features and Benefits:

• Withstands temperatures of over 400c
• Repel brake dust, and other contaminants from adhering to the surface making wheel care and maintenance effortless
• Very simple to apply on textured plastics
• Excellent UV protection on all exterior substrates.
• Versatility: Plastics, Wheels, and rubber surfaces
• Average use for 4 wheels and all plastic trim = 10ml.

Applications:

• Plastic Trim
• Rubber Trim
• Engine Bay
• Headlights, Fog lights, & Tail lights
• Wheels
• Tires
• Metal Trim
• Exhaust Tips
• Chrome
• Plastic Wheel Wells

Preparation for Application On Plastic:

• Make sure the surface is cool and dry. (Do not apply to hot surfaces or in direct sun.)
• Scrub surface with an all-purpose cleaner and microfiber towel
• Rinse while agitating with a microfiber towel to remove all residue from APC
• Dry surface
• Wipe surface with Carpro Eraser, wipe dry, and then allow the plastic to evaporate 20 minutes before applying

Directions for Plastic:

• Wet the applicator with a strip of DLUX and spread evenly across a small area at a time.
• When applying it is VERY important to work one area in even as you go. 
• Start in one corner and work out! / Do not take on a huge area at once. 
• Apply nice and even as you go. Do not try to spread too thin but be sure to work it to an even coat in the first minute before moving to the next overlapping area. After a minute you should not be going back over an area that was applied.
• On Textured trim do not wipe it off, just be sure you apply evenly as mentioned.
• On smooth plastic, you should wipe it off before it becomes too sticky. This results in a thinner coat that doesn’t last as long but on some smooth plastics, there is not an easy way to apply it evenly.

Directions for Paint and Chrome:

• Wash thoroughly
• Decontaminate with Iron X 
• Polish surface as needed
• Wipedown with CarPro Eraser
• On rims (metal, chrome, clear coat, etc) let cure 5 to 10 minute

Full Cure:

• To reach maximum performance coated surface must not see rain for 24 hours after application
• If the coated surface comes into contact with water during the first 24 hours it must be dried immediately 
• Do not drive the car for at least 6 hours after application 
• After 6 hours CarPro Reload can be applied to help protect the coating as it hardens and cures
• If the car can be parked in direct sunlight after application this will aid in curing the coating and reaching maximum performance sooner

This is fine ceramic coating Kits for cars. It includes everything you need to Wash, Decontaminate, Polish, Coat and add Slickness to your finish and protect it for years 

Transform and protect your pride & joy with this new paint protection bundle, offering breathtaking gloss, superior protection, and amazing water beading. Keeps your car cleaner for longer, easier to maintain and protect from the elements for years to come. 

 Give your vehicle the ultimate protection with this new Paint Protection Bundle. This bundle contains everything you need to completely wash & decontaminate your paintwork, and apply innovative glass coating protection to bring your vehicle to the next generation of car care.

This is one of the best ceramic coatings for cars. Check out many reviews on the net. You will not be disappointed.  

 Key Benefits:

1. Semi Profesional DIY ceramic coating, simple to apply.

2. Cquartz UK 3.0 2019: Extremely deep gloss that lasts!, Easy maintenance with "self-cleaning" properties (Stays cleaner than other products on the market) 70% Quartz with 99.9% purity

3. Protection and gloss superior to that of competitor "professional coatings" but easy to use for all detailers and DIY's
4. 70% Quartz with 99.9% purity
5. An extremely deep gloss that lasts!
6. Easy maintenance with "self-cleaning" properties (Stays cleaner than other products on the market)
7. Resistance to wash induced marring, bird dropping damage, stains, high or low temperatures, and traffic film
8. Repels UV rays, water, oils, dirt, and contaminants
9. Optional: SCHOLL CONCEPTS S20 BLACK Polish. This is designed to do aggressive compounding and polishing to almost complete perfection.  Depending on the pad used, you can control how aggressive you go.

Kit Includes:  ceramic paint protection kit

• 1 x Cquartz UK 3.0 30mL Kit (2019 V3.0) included in the Kit:
• 1x 30ml bottle of CQuartz UK Edition (15ml+/- per coat)
• 1 x 100ml bottle of CarPro Reload Silica Spray.
• 1x Applicator Block.
• 5 x 4" Microfiber Suede Applicators
• 1x 16" Microfiber Suede Towel

• 1x CarPro Reset 500 ml (Shampoo): Reset breaks down road grime and traffic films with the power of an alkaline cleaner, whilst being as gentle on the surface as a pH-neutral shampoo.
• 1x CarPro Eraser 500ml: Remove any leftover polishing oils with Eraser so the Ceramic Cquartz Coating can properly bond.
• 1x CarPro IronX 500ml:  Helps Safely Dissolve Iron Contaminants & Fall Out, this is used with no clay
• 4 x MF Paint protection and removal cloth (2 Red 2 Yellow): Wipe off the residue from the CquartzUK with the Red or Yellow cloth.
• 2 x Spray Triggers
• 1x Free set of gloves

Directions:

1. Wash with Reset or any other shampoo ( Avoid any shampoo with gloss enhancers or Wax)
2. Start spraying Carpro Iron-X onto the paintwork. Leave on the vehicle for a few minutes until you see the surface change colour, once it changes colour use a sponge/mitt and agitates the surface.
3. After the car has been successfully decontaminated through the use of Carpro Iron-X
4. Wash the car again with CarPro Reset to get rid of all impurities off the surface.
5. Perform hand or machine polishing (if needed) the surface has swirls.
6. After the decontamination process is complete, and any polishing stages have been completed.
7. Wipe the car down with CarPro Eraser. (Using Red Microfibre Towels)
8. Begin to apply CarPro CQUARTZ UK 3.0 (2018) onto the car through the use of the supplied suede applicators and block. Level the coating as per the instructions on the Cquartz UK product page. Also, use the Red/Yellow Supersoft Microfibers to wipe off the coating, and get ready for a glossy, and protective layer.

Note: If you require any additional assistance in applying CQUARTZ, don't hesitate to email or Call us and we will be able to help you out with the procedure.

This is my Favourite kit because no claying is required. Its great for newer cars. 

CarPro CQuartz UK Including Eraser [To Prep New Car]

 This car detailing kit is designed for hot and cold climates:

It includes everything you need to prepare the surface before coating.
This Kit will Coat and add Slickness to your finish and protect it for years 

Transform and protect your pride & joy with this new paint protection. It will offer breathtaking gloss, superior protection, and amazing water beading. Keeps your car cleaner for longer, easier to maintain and protect from the elements for years to come. 

 Give your vehicle the ultimate protection with this new Paint Protection Kit. 

 Key Benefits:

1. Cquartz UK 3.0 2019: Extremely deep gloss that lasts!, Easy maintenance with "self-cleaning" properties (Stays cleaner than other products on the market) 70% Quartz with 99.9% purity

2. Protection and gloss superior to that of competitor "professional coatings" but easy to use for all detailers and DIY's
3. 70% Quartz with 99.9% purity
4. An extremely deep gloss that lasts!
5. Easy maintenance with "self-cleaning" properties (Stays cleaner than other products on the market)
6. Resistance to wash induced marring, bird dropping damage, stains, high or low temperatures, and traffic film
7. Repels UV rays, water, oils, dirt, and contaminants
8. Optional: SCHOLL CONCEPTS S20 BLACK Polish. This is designed to do aggressive compounding and polishing to almost complete perfection.  Depending on the pad used, you can control how aggressive you go.

Kit Includes:

• 1 x Cquartz UK 3.0 30mL Kit (2019 V3.0) included in the Kit:
• 1x 30ml bottle of CQuartz UK Edition (15ml+/- per coat)
• 1 x 100ml bottle of CarPro Reload Silica Spray.
• 1x Applicator Block.
• 5 x 4" Microfiber Suede Applicators
• 1x 16" Microfiber Suede Towel

• 1x CarPro Eraser 500ml: Remove any leftover polishing oils with Eraser so the Ceramic Cquartz Coating can properly bond.
• 2 x MF Paint protection and removal cloth (1 Red 1 Yellow): Wipe off the residue from the CquartzUK with the Red or Yellow cloth.

Directions:

1. Wash with Reset or any other shampoo ( Avoid any shampoo with gloss enhancers or Wax)
2. If required use Clay lubricant with Claybar.
3. Wash the car again if you performed the clay process.
4. If the surface has swirls perform hand or machine polishing.
5. Before applying the coating, Wipe the car down with CarPro Eraser using Red or yellow Microfibre Cloths
6. Begin to apply CarPro CQUARTZ UK 3.0 (2018) onto the car through the use of the supplied suede applicators and block. Level the coating as per the instructions on the Cquartz UK product page. Also, use the Red/Yellow Supersoft Microfibers to wipe off the coating, and get ready for a glossy, and protective layer. (you will need to use the red and yellow microfibre cloths for the wiping of the coating.

Note: If you don't feel confident after reading our instructions on both this product page and the CQUARTZ UK page, it may be a good idea to do some of your own research on CQUARTZ UK, watching some videos on how it is applied, and reading some different accounts and descriptions to give you a great understanding on the process and whats involved. If you require any additional assistance in applying CQUARTZ, don't hesitate to email us and we will be able to help you out with the procedure.

You may also email us and request a phone callback. We will be able to help you if you have any concerns about applying the coating.

The Ultimate in Ceramic coating Kits we  now offer

GTECHNIQ Bundle Using C1 Crystal Lacquer Coating for [Newer Car Medium contaminants]

This is fine ceramic coating Kits for cars. It includes everything you need to Wash, Decontaminate, Coat and add Slickness to your finish and protect it for up to 3 years.

You will receive 2 coating packs for the work. 

Transform and protect your pride & joy with this new paint protection bundle, offering breathtaking gloss, superior protection, and amazing water beading. Keeps your car cleaner for longer, easier to maintain and protect from the elements for years to come. 

 Give your vehicle the ultimate protection with this new Paint Protection Bundle. This bundle contains everything you need to completely wash & decontaminate your paintwork, and apply innovative coating protection to bring your vehicle to the next generation of car care.

This is a new offering by Detailing Shed.

C1 with EXO combine to give your car that deep gloss that will last for years.

You will not be disappointed.  

Key Benefits:

GTECHNIQ C1 CRYSTAL LACQUER COATING

• This is extremely easy to apply and ideal for someone new to applying ceramic coatings, or for someone who wants a coating that is durable, but not too much hassle to apply.
• Easy maintenance with "self-cleaning" properties 
  
• An extremely deep gloss that lasts!
• Resistance to wash induced marring, bird dropping damage, stains, high or low temperatures, and traffic film

• Excellent swirl mark resistance
• Crystal clear finish
• Long-lasting protection from UV, dirt & swirl resistance
• Uses nano technology - a little goes a long way!
• Can be used on cars, motorcycles, boats & planes!
• Forms ultra strong chemical covalent bond with surface of paintwork
• Forms ultra hard sub-micron crystalline film inhibiting scratches & swirls

GTECHNIQ EXOV4 ULTRA DURABLE HYDROPHOBIC COATING

• Extreme hydrophobicity – water slides off treated surfaces
• Forms a hard film that makes water spots easier to remove
• Resistant to highly alkaline or acidic wash solutions
• Now aids the prevention of micro-marring
• Repels dirt, oils, & fallout
• Enhanced durability – lasts for up to 2 years
• Can be used as a stand-alone coating or as a top coat
• For cars up to medium estate (i.e. BMW 3 series touring) – select 30ml
• For larger cars, select the 50ml

Included in the GTECHNIQ C1 and EXO Coating Ultimate Bundle

• 1 x 30 or 50ml GTECHNIQ C1 CRYSTAL LACQUER COATING
• 1 x 30ml or 50ml kit GTECHNIQ EXOv4 ULTRA DURABLE COATING
• 1 x 500 ml  GTECHNIQ G-Wash 
• 1 x 500 ml GTECHNIQ W6 IRON FALLOUT REMOVER & DECONTAMINANT
• 1 x 500ml GTECHNIQ PW PANEL WIPE COATING PREP 
• 6 x MF Paint protection and removal cloth
• 2x ICE GreyThe Rag Company THE CERAMIC COATING TOWEL EDGELESS PEARL for C1
• 2x ICE Grey The Rag Company THE CERAMIC COATING TOWEL EDGELESS PEARL for EXO
• 2 x Blue Microfiber cloths for - Panel Wipe 
• 2 x Spray Triggers

• Optional: SCHOLL CONCEPTS S20 BLACK Polish. This is designed to do remove minor swirls
  
• Optional: Clay Vehicle if requires. Thats only if the W6 IRON FALLOUT REMOVER & DECONTAMINANT has not removed all contaminants.
• Make sure you have good quality lighting. See the scangrip range if required here

Directions:

1. Wash with GTECHNIQ G-Wash or any other shampoo ( Avoid any shampoo with gloss enhancers or Wax)
2. Wipe down panels with a Microfibre drying Towel
3. Spray GTECHNIQ W6 IRON FALLOUT REMOVER & DECONTAMINANT directly onto the surface and allow to dwell for 5-10 minutes. During this time any ferrous particles will dissolve forming a purple solution.
4. Hose the product off the car. Reapply a second time if required.
5. After the car has been successfully decontaminated through the GTECHNIQ W6 IRON AND GENERAL FALLOUT REMOVER
6. Wash the car again with GTECHNIQ G-Wash or any other shampoo to get rid of all impurities off the surface.
7. Perform hand or machine polishing (if needed) if the surface has no swirls. Skip this step.
8. After the decontamination process is complete, and any polishing stages have been completed.
9. Wipe the car down wit GTECHNIQ PW PANEL WIPE COATING PREP . (Using d Blue Microfibre Towels provided

Apply the GTECHNIQ C1 CRYSTAL LACQUER COATING:

Follow the instructions below

• Wear gloves provided
• Soak the applicator AP2 pad with several drops of product
• Replace the lid on the bottle and set to one side - holding in your hand while detailing your car may promote premature curing
• Spread product on a small panel, or ½ a large panel, at a time
• Remove residue immediately with a ICE Grey Microfibre Buff Cloth provided.
• You will need to buff the same area a second times to remove residue, so use at least two of the ICE Grey MF cloths at the one time.
• Make sure you rotate the cloths quickly so that the C1 does not cure in them - this can make residue harder to remove
• If you miss removing residue and it cures fully, you should re polish this area and re-apply C1
  
• As soon as you finish put your microfibres in water, wash them as soon as you can to prevent the product crystallising and making them unusable. Do not use the MF cloths no you paint jobs as they may still have crystalised.
• Leave your vehicle indoors for 12 hours before exposing it to the elements
• If you are applying EXO Ultra Durable Hydrophobic Coating or C2 Liquid Crystal over the C1, leave at least 4 hour before application
  

Apply the GTECHNIQ EXOv4 ULTRA:

Follow the instructions below

• Leave between 4 for C1 to cure before applying EXO v4
• EXO can be applied immediately over CSL (start at the same point and follow the panels in order). Do not leave CSL for longer than 24 hours if planning to apply EXO v4.
• Apply 5 – 10 drops of EXO v4 to the supplied AP2 applicator and work the liquid into the pad to get an even saturation.
• Apply to the panel using overlapping strokes, working an area of around 60cm x 60cm at a time.
• If the panel is 15 degrees C or lower, allow EXO v4 to cure for two minutes, then remove residue with a soft clean using a microfibre cloth. For temperatures between 15 and 25 degrees C, allow one minute to elapse prior to buffing.
• For temperatures higher than 25 degrees, buff immediately.
• With ICE Grey Microfibre Buff Cloth provided buff panels to ensure all residue entirely removed.
• With the second ICE Grey Microfibre cloth provided, buff panels to ensure all residue is entirely removed.
• Allow EXO v4 to cure for a minimum of 12 hours prior to exposing it to rain.
• Allow at least 1 week before washing your vehicle.
  

1. Note: If you require any additional assistance in applying GTECHNIQ Coatings
   don't hesitate to email or Call us and we will be able to help you out with the procedure.

Applying Gtechniq Panel Wipe video

Applying Gtechniq C1 Crystal Lacquer and EXO Ultra Durable Hybrid Coating Video

Carpro Reload Sio2 Quartz Spray Sealant

Carpro Reload is like a glass-like gloss, hydrophobicity, and dirt repellency of Silica Nanotechnology in a convenient spray-on, wipe-off sealant. Originally formulated to maintain the protection and finish quality of CQuartz coatings, Reload has also proven itself as a stand-alone sealant, where it can offer up to 3 months of protection on daily drivers. Reload’s easy to use waterborne formula can be applied to all vehicle surfaces, and even on damp surfaces, making it perfect for quickly topping up your vehicle’s protection and shine.

Reload offers a slick superhydrophobic layer which repels water like no other. Coupled with its ability to repel dirt & grime this leaves a stunning, glossy and highly reflective shine.  CarPro Reload is very easy to use (following our simple tips) and ideal for enthusiastic or professionals alike.  Once applied Reload keeps your paint clean longer, makes washing the car easier, and allows you to dry it faster!  

CarPro - Reset - Coating Auto Wash

 CarPro Reset is especially known for its ability to rejuvenate and deeply cleanse silica-based coatings such as CarPro Cquartz, Cquartz UK Edition, Reload, Hydro and any other silica-based paint coating. It also helps the coatings release contamination from the coated surface. 

These properties help prolong the coatings hydrophobic and self-cleaning attributes and increase the period of time between maintenance decontamination or clay barring.  

Features and Benefits

• Developed for use with all CarPro Nanotechnology Sealants and Coatings including Reload, Hydro2, and CQuartz.
• Intelligent pH Surfactants provide a strong cleaning and foaming action, whilst remaining mild and pH-Neutral (7) in use.
• Derived almost entirely from natural, organic and biodegradable ingredients; free from the harsh sodium and lauryl sulfate derivatives found in many shampoo products.
• 400~500:1 Dilution ratio allows for economical cleaning.
• Excellent gliding lubrication and a wonderful fresh scent make for a safe, and enjoyable wash experience.

Included in the kit

• 1x CarPro - Reset - Shampoo 500ml
• 1x CarPro Reload 500ml (Spray Sealant)
• 2 x Microfibre Colour Blue Pearl Microfibre Cloths – 40cm x 40cm – 330 GSM.
• 1x Spray Trigger

Full instructions check each product page.

5AA Ceramic Coating Bundle [6 Month Old Cars With medium Bonded Contaminants]

This is the finest ceramic coating Kits for cars. It includes everything you need to Wash, Decontaminate, Polish, Coat and add Slickness to your finish and protect it for years 

Transform and protect your pride & joy with this new paint protection bundle, offering breathtaking gloss, superior protection, and amazing water beading. Keeps your car cleaner for longer, easier to maintain and protect from the elements for years to come. 

 Give your vehicle the ultimate protection with this new Paint Protection Bundle. This bundle contains everything you need to completely wash & decontaminate your paintwork, and apply innovative glass coating protection to bring your vehicle to the next generation of car care.  

 Key Benefits:  

1. Cquartz UK 3.0 2019: Extremely deep gloss that lasts!, Easy maintenance with "self-cleaning" properties (Stays cleaner than other products on the market) 70% Quartz with 99.9% purity

2. Protection and gloss superior to that of competitor "professional coatings" but easy to use for all detailers and DIY's
3. 70% Quartz with 99.9% purity
4. An extremely deep gloss that lasts!
5. Easy maintenance with "self-cleaning" properties (Stays cleaner than other products on the market)
6. Resistance to wash induced marring, bird dropping damage, stains, high or low temperatures, and traffic film
7. Repels UV rays, water, oils, dirt, and contaminants
8. Optional: SCHOLL CONCEPTS S20 BLACK Polish. This is designed to do aggressive compounding and polishing to almost complete perfection.  Depending on the pad used, you can control how aggressive you go.
9. Easy to apply this DIY ceramic coating Kit

Kit Includes:

• 1 x Cquartz UK 3.0 30mL Kit (2019 V3.0) included in the Kit:
• 1x 30ml bottle of CQuartz UK Edition (15ml+/- per coat)
• 1 x 100ml bottle of CarPro Reload Silica Spray.
• 1x Applicator Block.
• 5 x 4" Microfiber Suede Applicators
• 1x 16" Microfiber Suede Towel

• 1x CarPro Reset 500 ml (Shampoo): Reset breaks down road grime and traffic films with the power of an alkaline cleaner, whilst being as gentle on the surface as a pH-neutral shampoo.
• 1x CarPro Eraser 500ml: Remove any leftover polishing oils with Eraser so the Ceramic Cquartz Coating can properly bond.
• 1x CarPro ImmoLube (Clay Lubricant) 500ml. A non-stick formula for ease of use. Reduces the chance of marring on automotive surfaces 
• 1x Concours CLAY 200g: Allow for the safe removal of all contaminants such as industrial fallout, oxidation from acid rain, or exhaust pollutants.
• 4 x MF Paint protection and removal cloth (2 Red 2 Yellow): Wipe off the residue from the CquartzUK with the Red or Yellow cloth.
• 2x MF (Green cloth) (multi-Use Cloth) Can be used for Polish or eraser to wipe down prior to coating. Green MF can be used with reload also.
• Optional Recommendation: 1 x SCHOLL CONCEPTS S20 BLACK 1-STEP COMPOUND Polish 500g

Directions:

1. Wash with Reset or any other shampoo ( Avoid any shampoo with gloss enhancers or Wax)
2. After you dry your car, spray Carpro Immolube onto the paint, and start using your clay bar and run across the surface, you may require to spray more Immolube as the surface starts to stick.
3. After the car has been successfully decontaminated using the Clay bar with Immolube.
4. Wash the car again with CarPro Reset to get rid of all impurities from the surface.
5. Perform hand or machine polishing (if needed) if the surface has any swirls or marks from the claying stage.
6. After the decontamination process is complete, and any polishing stages have been completed.
7. Wipe the car down with CarPro Eraser. (using Green Microfibre Towels)
8. Next step: Begin to apply CarPro CQUARTZ UK 3.0 (2018) onto the car through the use of the supplied suede applicators and block. Level the coating as per the instructions on the Cquartz UK product page. Also, use the Red/Yellow Microfibers to wipe off the coating, and get ready for a glossy, and protective layer.

Note: If you don't feel confident after reading our instructions on both this product page and the CQUARTZ UK page, it may be a good idea to do some of your own research on CQUARTZ UK, watching some videos on how it is applied, and reading some different accounts and descriptions to give you a great understanding on the process and what's involved. If you require any additional assistance in applying CQUARTZ, don't hesitate to email us and we will be able to help you out with the procedure.

You may also email us or call us.

We will be able to help you if you have any concerns about applying the coating, its not as hard as what some make it out to be.

The Gloss Maintenance Sealant Kit has Amazing high gloss with CarPro Reload nano sealant, CarPro Ech2o Concentrate Waterless Wash & Quick Detailer, as well as Microfibre cloths.

Carpro Reload: (Use Red or Yellow  Microfibre Cloth)

Reload packs the glass-like gloss, hydrophobicity, and dirt repellency of Silica Nanotechnology in a convenient spray-on, wipe-off sealant. Originally formulated to maintain the protection and finish quality of CQuartz coatings, Reload has also proven itself as a stand-alone sealant, where it can offer up to 3 months of protection on daily drivers. Reload’s easy to use waterborne formula can be applied to all vehicle surfaces, and even on damp surfaces, making it perfect for quickly topping up your vehicle’s protection and shine.

Features:

• Excellent UV Protection
• Extreme Gloss that does NOT wash away
• Slick glass like tactile feel
• Keeps surfaces cleaner longer
• Water-based formula mainly composed of special modified Sio2 (Quartz)
• Fast and Easy
• Excellent for topping CQuartz
• Apply wet or dry
• Excellent on rubber and plastic trim - Does not stain
• Repels rain & grime
• Super Hydrophobic

Directions:

Carpro CQUARTZ Lite

Carpro CQuartz Lite is a user friendly, easily applied ceramic coating! “Lite” is based on the incredible CQuartz UK Ceramic Coating Technology, which has become famous around the world! CQuartz Lite can be applied as a stand-alone ceramic coating lasting more than 6 months or it can be used as a topcoat for existing CQuartz coatings!

CQuartz Lite was designed for those that are not ready to make the plunge into the industry-leading strength of our professional grade coatings but wish to enjoy some of the many benefits that only CQuartz coatings offer.  

The capabilities of CQuartz Lite include: easier to clean surfaces, resistance to insect splatter, petrol spills, light solvents, and UV rays, whilst providing a beading contact angle of 110 Deg!  In other words, CQuartz Lite helps keep your paint super glossy, well protected, beads like crazy, and washes off easy when properly maintained! 

CQuartz Lite is built on a combination of Sio2 and Tio2 particles with over 45% solid materials, as well as proprietary ingredients not made public outside of the lab! CQuartz Lite is a great option for professional detailers as an entry level coating or for the do it yourself guru who wants to switch to their first true ceramic coating.

CQuartz Lite may be applied to virtually any exterior surface of your car including paintwork, plastics, wheels, and glass (except windscreen), just like your other favourite CQuartz products!

Features:

• Spray on and wipe off or wipe on and wipe off. 
• The fastest to apply Cquartz yet
• Protection and high gloss with ease of use for all detailers
• Sio2 (ceramic) / Tio2 (titanium) Hybrid coating
• Easy maintenance with "self cleaning" properties
• Resistance to stains, dirt, soiling, loss of gloss and weathering
• Repels UV rays, water, oils, dirt, and contaminants 

Specifications:

 Kit Includes:

• (1) CQuartz Lite 150ml Bottle
• (2) Microfiber Applicator
• (1) CarPro 2Face No Lint Towel
• (1) 3M Face Mask
• (1) User Manual

Directions:

• Make sure the surface is clean and full decontaminated. Use CarPro Iron X, Tar X, and clay the surface to ensure all contamination is removed.
• Use Carpro Eraser (or similar) to remove oils before application.
• Make sure the surface is cool and dry. You may wish to polish the surface with CarPro Essence or Reflect to create higher gloss before using Eraser or to ensure maximum durability.
• Apply 10-12 drops on a microfiber applicator; apply the product evenly to one small area of roughly 60cm x 60cm with complete coverage and an even layer.
• Use a MF towel to remove any excess. CQuartz Lite does not need to be left to cure on the surface so it should be removed immediately.
• Check well with an appropriate light source to ensure you remove any high spots (excess product that was not levelled) or residue.
• Note: For a short period of time after application, high spots that were not removed immediately can be corrected by applying more CQuartz Lite on that area and wiping off immediately.
• After the paint is free of residue, leave to dry for 4 hours prior to getting wet.
• Any water drops during the first 48h should be removed before drying to prevent water spotting.
• We also recommend the use of CarPro Reload 1 hour after application to protect from water spots during the first 48h.

Maintenance Tyres and Rims  Kit

This is a Safe for your Tyre and Rims. We have also included the amazing Carpro Hydo Lite which is an Sio2 Based Sealant and protection system, to protect your Rims

The Kit comes with important Carpro Hydro lite.

This product will safely clean and also protect your Rims.

This is a must-have Kit for anyone who wants to have the Rims looking there best.

Features and Benefits

• Safely clean and protect your Rims and Tyres

Kit Includes

1 x P&S Brake Buster – Non Acid Foaming Wheel Cleaner 473ml

1 x  P&S Shine All PERFORMANCE DRESSING Tyres & Interior  473ml

1 x CARPRO HYDROLITE 1L (Durability: 3 Months)

1x The Rag Company – 3 X 5 MICROFIBER TERRY DETAILING SPONGE APPLICATOR - BLACK

1 x The Rag Company – **Edgeless Miner** Premium Microfiber Metal Polishing Towel – 41cm x 41cm 16x16Inch

1x Tyre Cleaning Brush for Low Profile Tyres

	1x Maxshine Wheel Cleaning Brush (Length 45cm) Quick, effective cleaning of all wheels
	Brushes For Wheels, Rims, Dashboard, Engine Bay [High Quality] Size: 40mm

GTECHNIQ G5G4 MAX REPELLENCY GLASS KIT BUNDLE

Why use GTECHNIQ G5 Water Repellent Coating for Glass and Perspex?

• For glass or Perspex surfaces e.g HEADLIGHTS
• Great for dirt and water repellency.
• G5 is highly hydrophobic and beads water even at low speeds - making driving safer and reducing the need for your wiper blades.
• Any glass coated in G5 will stay cleaner for longer and any contaminants such as bugs, bird droppings and ice will be easier to remove.
• G5 offers maximum repellency, but is less durable than our G1 ClearVision Smart Glass.

Features and Benefits

• Durability: One application lasts for up to 5-6 months
• Maximum water repellency
• Easy application
• Water will blow off car screens at speeds as low as 30mph
• On vertical glass water will roll off and leave a virtually spotless surface
• Once coated glass will stay cleaner for longer and any contaminants such as bugs, bird droppings, and ice
• Will be easier to remove

Directions:

• Wear protective gloves and work in a well ventilated area
• Clean glass with G4 Nanotech Glass Nano Polish.
• Do not apply in direct sunlight
• Apply a small amount of G5 to an AP1 Applicator or  Microfibre Buff Cloth, in a circular motion covering all of the glass
• Leave the coating to cure for between 10 and 15 minutes at room temperature
• Remove residue from the coated surface with an MF Glass Power Cloth or MF1 cloth
• Avoid contact between water and the coated surface for at least two hours following application
• Store in a cool, dry place
• Use within 12 months of opening

6C Carpro Maintenance Bundle 500ml Kit

The CarPro Maintenance Bundle provides everything you need to easily maintain your ceramic coating!

The Kit includes the following:

• CarPro Reset: Car Wash Soap - Use Apply 25-30ml of Reset into a bucket with 10-15 litres of clean water..
• CarPro Iron X: Iron Removal - Use for decontamination every 3 to 6 months after washing with Reset.
• CarPro Tar X:  Tar Removal - Use as needed for Tar removal. Be careful around sensitive plastics, trim, rubber etc.
• CarPro Reload:  Spray Sealant. Apply every 3 months, after Iron X or Tar X treatment or anytime you like.
• CarPro Elixir: Ready to use quick detailer.

The Ceramic coating Kits we  now offer

GTECHNIQ Coating Bundle EXOv4 ULTRA 2 year Protection [Newer Car Medium contaminants]

This is fine ceramic coating Kits for cars. It includes everything you need to Wash, Decontaminate, Coat and add Slickness to your finish and protect it for up to 3 years.

You will receive 1 coating packs for the work. 

Transform and protect your pride & joy with this new paint protection bundle, offering breathtaking gloss, superior protection, and amazing water beading. Keeps your car cleaner for longer, easier to maintain and protect from the elements for years to come. 

Give your vehicle the ultimate protection with this new Paint Protection Bundle. This bundle contains everything you need to completely wash & decontaminate your paintwork, and apply innovative coating protection to bring your vehicle to the next generation of car care.

This is a new offering by Detailing Shed.

EXO to  give your car that deep gloss that will last for years.

You will not be disappointed.  

Key Benefits:

• Amazing level of gloss, depth and protection!
• Ultra-hydrophobic, glossy, and slick to the touch
• Lasts up to 2 years
• Enhanced ability to resist watermarks
• Incredibly easy to apply

GTECHNIQ EXOV4 ULTRA DURABLE HYDROPHOBIC COATING

• Extreme hydrophobicity – water slides off treated surfaces
• Forms a hard film that makes water spots easier to remove
• Resistant to highly alkaline or acidic wash solutions
• Now aids the prevention of micro-marring
• Repels dirt, oils, & fallout
• Enhanced durability – lasts for up to 2 years
• Can be used as a stand-alone coating or as a top coat
• For cars up to medium estate (i.e. BMW 3 series touring) – select 30ml
• For larger cars, select the 50ml

Included in the GTECHNIQ Bundle 

• 1 x 30ml or 50ml kit GTECHNIQ EXOv4 ULTRA DURABLE COATING
• 1 x 500 ml  GTECHNIQ G-Wash 
• 1 x 500 ml GTECHNIQ W6 IRON FALLOUT REMOVER & DECONTAMINANT
• 1 x 500ml GTECHNIQ PW PANEL WIPE COATING PREP 
• 4 x MF Paint protection and removal cloth
• 2x ICE Grey The Rag Company THE CERAMIC COATING TOWEL EDGELESS PEARL for EXO
  
• 2 x Blue Microfiber cloths for - Panel Wipe 
• 2 x Spray Triggers

Directions:

1. Wash with GTECHNIQ G-Wash or any other shampoo ( Avoid any shampoo with gloss enhancers or Wax)
2. Wipe down panels with a Microfibre drying Towel
3. Spray GTECHNIQ W6 IRON FALLOUT REMOVER & DECONTAMINANT directly onto the surface and allow to dwell for 5-10 minutes. During this time any ferrous particles will dissolve forming a purple solution.
4. Hose the product off the car. Reapply a second time if required.
5. After the car has been successfully decontaminated through the GTECHNIQ W6 IRON AND GENERAL FALLOUT REMOVER
6. Wash the car again with GTECHNIQ G-Wash or any other shampoo to get rid of all impurities off the surface.
7. Perform hand or machine polishing (if needed) if the surface has no swirls. Skip this step.
8. After the decontamination process is complete, and any polishing stages have been completed.

9. Wipe the car down wit GTECHNIQ PW PANEL WIPE COATING PREP . (Using blue Microfiber cloth provided

10. To apply the GTECHNIQ EXOv4 ULTRA see steps below

    
    

Instructions

• Apply 5 – 10 drops of EXO v4 to the supplied AP2 applicator and work the liquid into the pad to get an even saturation.
  
• Apply to the panel using overlapping strokes, working an area of around 60cm x 60cm at a time.
• If the panel is 15 degrees C or lower, allow EXO v4 to cure for two minutes, then remove residue with a soft clean using a microfibre cloth. For temperatures between 15 and 25 degrees C, allow one minute to elapse prior to buffing.
• For temperatures higher than 25 degrees, buff immediately.
• With ICE Grey Microfibre Buff Cloth provided buff panels to ensure all residue entirely removed.
• With the second ICE Grey Microfibre cloth provided, buff panels to ensure all residue is entirely removed.
• Allow EXO v4 to cure for a minimum of 12 hours prior to exposing it to rain.
• Allow at least 1 week before washing your vehicle.
  

1. Note: If you require any additional assistance in applying GTECHNIQ Coatings
   don't hesitate to email or Call us and we will be able to help you out with the procedure.

Applying GTECHNIQ Panel Wipe video

Applying Gtechniq  EXO Ultra Durable Hybrid Coating Video