CarPro Iron X Lemon Scent (IronX)

Highly effective, acid-free and pH balanced, CarPro Iron X stops rust spots and premature failure of the clear coat by making short work of iron contaminant removal across the entire vehicle! Using Iron X saves time and helps avoid the laborious claying process used in traditional car care regimes. This formulation of CarPro Iron X is safe and effective for use on all car surfaces and will not deteriorate clear coats. This preventative measure puts a stop to premature corrosion.

We are very proud to present Iron X Lemon Scent!! IronX LS (Lemon Scent) offers less harsh odour, but even more of the Brake Dust blasting power you have come to expect from the industry leader in brake dust removal... CarPro Iron X!
Iron X LS is an entirely new formula providing approximately 10% more iron dissolving power than ever before!  

Airborne chemical compounds and ferrous particles (particles containing iron) actually penetrate the paint and create corrosive compounds that eat deep into the paint's sub-layers.  This is a gradual process that is not evident until it's too late.

Iron X contains unique chemical ingredients that effectively dissolves the sintered iron by forming a water soluble iron complex. No other method cleans paint and wheels as deeply as Iron X. The Iron X Paint and wheels decontamination system was developed to remove the root of the problem (BELOW the top surface) rather than just shave off the top of the particle in the manner traditional claying offers.

During the use of your vehicle, brake dust and road grime become sintered to the surface of the paint, rims, and wheels due to the high temperatures they are exposed to. Brake dust contains high levels of iron and once sintered to the rim, becomes extremely difficult to dissolve or remove without the use of harsh chemicals. Iron X opens up the paint's pores to release ferrous particles and to neutralize caustic compounds that have developed in the paint's subsurface. Ongoing damage is immediately stopped and future damage is prevented, by removing the ferrous particles.

Iron X sprays on as a transparent liquid. As the cleansing liquid begins to work into the dirt and grime, the formula begins to turn purple or red.  This colouring effect is the Iron X Cleaner forming a bond to the sintered iron on the car paint or wheel and changing its state to a water-soluble complex for an easy wipe or rinse off.  Stubborn, baked on grime may take a small amount of agitation.

Iron X is widely used by body shops, high-end detailers, and even dealerships for new and used car prep.  It is proven to deliver a clean, glassy smooth vehicle free of iron contaminants.  No other iron decontamination product is as safe, fast, and effective! 

Features:

• Completely new formula with even more power!
• Removes Iron Particles and prevents the spread of iron-related damage & helps to protect your vehicle from paint system failure.
• Safe to use, Acid-Free, and pH neutral (pH 6-7).
• Safe to use on Clear Coat Paint
• Safe to use on Aluminum, Chrome, Alloy, or Clear coated wheels.
• Safe for use on all solid car surfaces and will not deteriorate clear coats. 

Directions:

1. Shake the bottle.
2. You can cover the surface with Iron X by spraying it everywhere but that can be wasteful. We recommend that you spray as needed and spread it with a small sponge or applicator to cover the entire surface. Evenly cover the surfaces you wish to decontaminate. The product is strong so you don’t have to be wasteful. Just make sure it contacts the entire surface.
3. Allow the product to dwell for 5 minutes in the shade. Do not allow it to dry in the sun. On light coloured paints you will see the product dissolving ferrous particles as it turns colour. On darker coloured paints everything is happening in exactly the same way. It’s simply more difficult for you to view the colour changing effect.
4. After allowing to dwell take a damp (not soaked) Paint safe Mitt or sponge (or other media if you prefer) and agitate the surface
5. Thoroughly rinse the surface.

Precautions:

• Avoid using on Fabric Convertible tops or rubber anything that contains recycled tires
• Keep out of reach of children and pets
• Do not ingest
• Use outside or in a ventilated area
• Avoid prolonged contact with your skin, We recommend Gloves. 
• Avoid inhalation
• Use PPE as needed 

 Iron X Facts and Frequently Asked Questions:

How iron particles appear on your car surface and where? 

Iron particles are all around us, and of course on our cars after travelling. They can be made from your car braking, driving near other cars, big trucks, train rails, industrial zones etc. They adhere to the car surface and once they "stick" to your paint due to there sharp edges together with sunshine they start to bake into the soft car paint where they oxidize and rust.

How to prevent iron dust from etching your paint?

It’s almost impossible to prevent the irons to stick on the surface, but it has been proven that inorganic coatings (CQuartz) has a self-cleaning effect and can reduce the quantity of iron that adheres to the surface. 

Is Iron X pH Neutral?

Yes

Why does it change colour?

With Iron X it is due to chemical reaction between the chemicals and iron.  Some other products change colours as well. There are very cheap chemicals other companies use that change their character simply by contact with air or iron but have zero to little dissolving power.

Why do you use fully plastic spray heads?

Iron X would react with normal triggers with metal springs inside.

Will Iron X stain chrome wheels or chrome trims?

No, it’s completely safe to use on any chrome wheels, trim, or bare aluminium wheels.

Will Iron X discolour wheel weights?

Yes, it will. Wheel weights are made from lead, Iron X will change the lead colour to green. However light agitation will recover the original colour.

Will Iron X affect brake calipers?

For most high-end calipers, it will not affect them however it can affect the paint colour of low quality acrylic painted calipers. For this reason, we advise you to be careful near calipers if unsure of the finish or type of paint.

Will Iron X remove wax from car paint? 

Yes, if it’s a highly organic oil type it will affect the wax properties. If it’s a synthetic polymer sealant it won’t affect it much. On CarPro Sealants, Cquartz coatings, or other true coatings it won’t affect them at all.  In fact, it is designed for use on coatings as well.

Does Iron X remove tar spots as well?

No, Iron X reacts only with iron particles.

Is Iron X safe to use on 3M and Paint Protection Film?

Yes, there is no problem at all using it on a clear bra and modern PPF when used properly.

Why does it smell so bad?

This is the nature of the chemical used, you cannot avoid this. If it doesn’t smell so strong it means it has a very little effect on iron or is a very diluted or inferior formula.

Why does Iron X have low viscosity?

If you make the product too thick it will not react well to iron particles due to the thickener additives. If you make it too thin there will only be a short reaction time, which will leave some iron behind. With Iron X we have found the sweet spot between these two variables to create the most potent but safe iron fallout remover on the market.

Can I leave Iron X to dry on the surface?

Yes, Iron X could dry on the surface of a modern gloss clear coat paint system as long as you wash it off, but do not let it dry on the surface when under direct sun. Even if it drys up don't worry, wipe it off. If it stains, just clean it with any polish.

It is not acid base.

CarPro Eraser:

Intensive Polish & Oil Remover

An excellent all-around cleaner, Eraser was specifically designed for the complete removal of polishing oils for inspection and prior to the application of CQuartz or any other coating, wax, or sealant.  However, due to the alcohol mixed with Eraser's special degreasing agent, we have found it also makes an excellent streak free glass cleaner and also works as a general purpose degreaser and cleaner for many situations.  A final wipedown with Eraser on your tires will leave them cleaner than a tire wash and scrub alone.

Until now IPA (isopropyl alcohol) and water mixture, have been used to remove polish residue and fillers from the auto paint before a wax or paint sealant are applied. This step allows you to check your work following compounding and it is supposed to ensure a totally clean paint surface on which the LSP (last step product) can bond.  IPA loosens oil but the problem occurs as oil can be spread around or redeposited as you wipe the paint.

Eraser goes a step further with its intense cleaners that dissolve oils. Eraser breaks down polish residue as well as removing dust. It has the added bonus of cleaning better than an ordinary IPA, due to its patented degreasing formula. Eraser makes it possible for everyone to get the perfectly clean surface prior to the application of Cquartz or any other coating, wax, or sealant.  Furthermore, with our proprietary blend, you will not find even a hint of that nasty IPA smell when using Eraser

Features:

• Eraser is an intense cleaner designed to dissolve oil particles and remove polish residue to prepare the paintwork for Cquartz.
• When you wipe down your polished vehicle with Eraser Intense Oil & Polish Cleanser, you’re removing oils, fillers, and dust completely.
• Application of CQuartz or your chosen LSP will bond much better and create a long-lasting shine with great protection while giving the user peace of mind as to the quality of the surface prior.
• Eraser also has anti-static components to resist dusting after wiping. The paint will stay dust-free while you’re in the process of applying Cquartz so you don’t have to keep re-cleaning panel by panel.
• Eraser contains no silicone and is completely safe for use in paint shops and body shops.
• Eraser smells great, which is definitely not true of a homemade IPA! CarPro Eraser Intense Oil & Polish Cleanser is the next step and an evolution beyond IPA.
• Prepare your vehicle for the best results with Cquartz by erasing oil and polish residue.
• Due to Eraser key ingredients & makeup, Eraser also makes a fantastic glass cleaner and degreaser. It leaves a streak free finish, to glass every time with the added benefit of a static-free finish so the glass stays cleaner longer.

Tips:

• Flip and change out your towels often as you work on the vehicle.

 Glass Cleaning Directions:

 Spray the surface.  

1. Wipe surface using Microfibre Towel  or quality non-linting microfiber  (Primary towel)
2. Follow with a secondary towel that you do not allow to become saturated with cleaner (Secondary Towel)

 Additional Glass Cleaning Tips

 Clean interior glass last (after all interior dressing is complete)

1. Fold glass cleaning towel twice (into quarters)  When in use keep flat and folded so cleaning and wiping pressure is evenly distributed.
2. Never finish glass with a dirty or saturated towel
3. On the interior of glass - finish in left to right direction. / On the exterior of glass - finish in the vertical direction. / In this manner, you can easily identify which side of the glass a streak is on IF you see one after cleaning. 

Optimum Power Clean APC All Purpose Cleaner

This an environmentally friendly, safe, yet powerful All Purpose Cleaner. The unique formula contains special polymers and emulsifiers break down contaminants with minimal agitation.

Power Clean, cleans your vehicle's dirtiest surfaces including removal of bugs and paint contamination, brake dust, oily grime when used full strength.

Dilute it to clean leather, vinyl and plastics. It can remove old dashboard and trim dressings and tough residues from interior panels. Wipe away spills from leather seats.

• Engine Bay
• Leather
• Vinyl 
• Wheels
• Tyres
• Dashboard and everything in between.

Directions:

To clean wheels and tires, Optimum Power Clean can be used at full strength or diluted up to 3:1. Agitate as needed and rinse off.

• Painted surfaces: dilute at 3:1 for best results. Spray on, agitate lightly and rinse.
• Interior panels: dilute at 3:1. Spray on, agitate, and wipe off.
• Leather: dilute at 5:1. Spray on and wipe off.
• Vinyl or the dashboard: dilute at 5:1. Spray on and wipe off.
• For tougher grime and stains: Use full strength.

THE ULTIMATE (APC) ALL PURPOSE CLEANER

GTECHNIQ W2 Universal Cleaner Concentrate

Keep stains at bay with this awesome Multi Purpose Cleaner!

W2 Multi Purpose Cleaner easily removes stains such as pen marks on clothing, heel marks on car trim, food stains from linen table cloths to name a few.

Use W2 to remove stains from any material including fabric, concrete, outdoor furniture, leather, engine bays, carpets etc.

Dilute 1 part W2 between 20 and 5 parts water depending on severity of staining and use neat on the most stubborn stains.

Features and Benefits

• Matchless cleaning power
• Can be used on any surface
• Removes stains with ease
• Can be diluted for multiple surfaces.

W2 is an environmentally friendly cleaner designed to remove staining from a variety of surfaces including interior fabrics and upholstery, alloy wheels, leather and vinyl. Used in higher concentration W2 works wonders on grease and grime, making cleaning on engine bays very easy!

Dilution recommendations:

Dilute 5:1 for the following:

• Paint oxidation
• Heelmarks
• Grills
• Hoods
• Wax stripping

Dilute 10:1 for the following:

• Fiberglass
• Air conditioners
• Driveways
• Counters
• Vinyl
• Tools
• Smoke films
• Alloy wheels
• Cloth furniture
• Leather

Dilute 20:1 for the following:

• Window cleaner
• Walls
• Stainless steel
• Outdoor furniture
• Chrome

Other concentrations:

• Carpet - 7:1
• Grease - 2:1
• Steam cleaning - 50:1
• Engine bays - 1:1

Storage:

W2 Universal Cleaner Concentrate has a shelf life of 2 years from purchase, for best result, use within 1 year of opening.

CARPRO SPOTLESS WATER SPOT REMOVER

Spotless paint is beautiful, but it is difficult to maintain in a world of hard, mineral-laden water without constant polishing. CarPro Spotless chemically breaks down the mineral deposits left behind by water droplets (Otherwise known as ‘water spots’) before they can etch into the finish, thus negating the need for time consuming abrasive correction, and prolonging the life of the paint. If left unattended, water spots can cause permanent damage to the most resilient of vehicle surfaces, including automotive clearcoat, brightwork trim, and glass! Even sealants and coatings are not fully impervious to some harsh mineral deposits and can benefit from periodic chemical water-spot removal to keep them at the peak of their functional and aesthetic performance. Spotless’s proprietary blend of carefully balanced gentle acids safely removes heavy mineral deposits on most vehicle surfaces, and can even be used to help maintain our CQuartz line of nanotechnology coatings. If you are looking for a fast and efficient water-spot remover to dissolve unsightly bonded mineral contaminants from your car or motorcycle, CarPro Spotless is the solution to your problems.

  Features and Benefits

• Advanced balanced-acid formula safely dissolves hard-water deposited mineral residues before etching can occur.
• Developed to quickly remove damaging water spots
• Compatible and safe for use on clear coat and all CQuartz Nano-Coatings when used as directed

Directions:

• Shake well
• Spray on microfiber towel, sponge
• Work in the solution over the surface
• Wipe off with MF, and remove residue with  Water. Rinse well.
• Repeat steps 2-4 if necessary.

 CarPro ImmoLube (Clay Lubricant) 

CarPro ImmoLube is a new innovation in lubricants that offers a non-stick formula for ease of use. This new solution will reduce the chances of marring on the paint and can be utilised as a clay or sanding lubricant. 

ImmoLube is a new lubrication solution that has been infused with a special mixture of solvents and surfactants that are designed to reduce surface friction whilst sanding, polishing or claying automotive surfaces. The non-stick formula offers enough viscosity to reduce marring and any chance of damaging the paint. ImmoLube also contains no gloss enhancers, or protective polymers and is easy to remove with a wash or simply an Eraser wipe down. 

 KEY BENEFITS

• A non-stick formula for ease of use
• Reduces the chance of marring on automotive surfaces 
• New innovative technology that provides simple and easy, quality lubrication 

 DIRECTIONS

• Dilute to suit purpose and tool
• Shake Well
• Spray over the sanding disc, or clay bar and over the work area
• Begin sanding or claying, keep surface lubricated
• Wipe off once complete or wash as needed

Carpro 3x Pack Clay Kit

1 x Grey Ultra Fine Clay 100gr bar (for use on brand new cars) 
1 x Green Fine Grade Clay 100gr bar (for use on cars with 15k on clock) 
1 x Yellow Medium Grade Clay 100gr bar (for use on cars 15k + on clock)

The CarPro 3 clays are an elastic clay that is easy to use and re-mold. When used in conjunction with a lubricant such as Carpro Immolube, you can expect a safe and thorough decontamination process that deep cleans the pores of paint that are otherwise invisible to the naked eye and are not cleaned by regular washing alone. 

This is perhaps the most important step in your procedure as it provides the clean base required for your protectant to adhere to.

3Clays gives you the flexibility to handle multiple decontamination levels for different cars or areas in the same product. 

For an even more thorough decontamination 3Clays can be used with  Concours Purify as a lubricant and powerful iron fillings remover. No clay bar alone will remove ferrous iron particles from a vehicles paintwork. 

Decontamination Tar & Iron Removal with Clay Bar bundle

• NV PURIFY - Advanced Clay Lubricant 500mL
• Concours Clay Bar 200g

NV PURIFY is a new advanced type of clay lubricant that not only reduces friction between the clay bar and the paintwork but also chemically breaks down iron and other contaminants to give you a more thorough decontamination process.

PURIFY specifically targets iron fall out and can help remove stubborn contamination from the paintwork. It also has an advanced lubrication formula which allows the clay bar to effortlessly glide over the surface.

This combination not only gives you a much deeper de-contamination process but helps prevent marring through the claying process.

 FEATURES: 

• Helps Safely Dissolve Iron Contaminants & Fall Out
• Enhanced with cleaners to help Safely break down waxes & sealants
• Safely helps soften other stubborn surface contaminants before claying
• High Surface Lubrication
• Increases the effectiveness of claying
• Cuts down the time needed to clay each section
• Increases Paintwork Clarity

 DIRECTIONS

1. Use gloves
2. Spray onto the exterior painted surface
3. Allow 30-45 seconds before beginning to clay
4. Start rubbing the clay lightly back & forth working in small sections
5. Let the product continue to react for 3-4 minutes in total.
6. Rinse off the product with pressure 

Eraser by CarPro

This was initially developed as pre-cleaner to remove all oils from the paint surface and prepare for the best possible adhesion for CQuartz, CQuartz UK and Reload paint coatings, Thus replacing the need for IPA (Isopropanol Alcohol) which was considered the best method to removed polishing oils from the paint surface.

Recent developments have taught us that due to the high evaporation rate of IPA it’s only effective in lifting oils to the surface, it does not, however, dissolve them, even at very low dilutions, additionally the high evaporation rate of IPA can also lead to marring being induced on soft paints when completing a wipe down procedure. Eraser not only lifts polishing oils and residue to the surface but also dissolves them as well as providing enough lubrication to avoid marring on soft paints and leaves a static free dust repellent surface which is then prepared for your final step product, safe in the knowledge it will achieve maximum adhesion to the paint.

Eraser also eliminates the requirement for dilution ratio measurements or the associated risks of getting it wrong and accidentally softening the paint.

Eraser contains no silicone or gloss enhancers like a quick detailer, it is completely safe for use in paint areas, body shops, and finessing areas. It is perfect for new car showrooms to eliminate fingerprints, dirt, dust and grime and will leave a perfect finish.

Included in Kit

1 x CarPro Eraser - Oil & Residue Remover 1L

2 x Microfibre Cloths – 40cm x 40cm – 330 GSM – Blue

FEATURES AND BENEFITS

• Use as a final wipe down before applying waxes, coatings or sealants
• Allows waxes, sealants or coatings to bond to the surface with no premature failures.
• Safe to use on all exterior painted surfaces
• Can also be used to clean glass surfaces 

DS Clay Mitt Ultimate Fine Grade

The DS Clay Mitt Ultimate is a high quality Mitt.

It is the second generation of Clay Mitts on the market.

The DS Clay Mitt Ultimate is rubberised mesh coating that is attached to one side of the mitt to remove gloss hindering contaminants to give you the best finish possible.

With little to no effort tree sap, over-spray, tar, stubborn road grime, dirt, industrial fall-out, and so much more will be removed from your paint to fully prep your finish.

The DS Clay Mitt Ultimate  does not need to be re-kneaded, like traditional clay bars, and can be used again after dropping on the ground.

Decontaminate your car easier than ever with the the DS Clay Mitt Ultimate.

Decontaminating your car is an essential step to having the gloss you’ve always wanted.

Contaminants caused by everyday occurrences (tree sap, rail-dust), actually become embedded in your paint, hindering the gloss. This also prevents your polishes, sealants, Coatings and waxes from properly bonding with the paint, reducing their effectiveness.

Traditionally, we’ve always used clay bars to remove those contaminants, but it’s proved to be a bit of a mess.

You’re always having to re-knead the clay so you can have a clean section, and if you drop the bar, forget it; you’ll have to toss it and buy another. Plus, you can use the DS Clay Mitt Ultimate  as part of a wash with a high-lubricity shampoo, or you can use it on it's own with a quick detailer acting as a lubricant.

We use the the DS Clay Mitt Ultimate with Carpro  Immolube  here

Fine Clay Bar

The Concours CLAY Bar is now back in a new 200g variant, with better clay quality ensuring a finer and more safer claying process. 

We are confident that the new Concours CLAY bar is more durable, finer and safer to use - whilst still being a cost-effective and quality product. 

The use of this clay bar along with a Clay Lubricant, such as Concours PURIFY will allow for the safe removal of all contaminants such as industrial fallout, oxidation from acid rain, or exhaust pollutants. 

This unique clay bar allows us to combat the contamination on our cars, and get them ready to be waxed, sealed or coated. 

NV PURIFY - Advanced Clay Lubricant 

A new and improved advanced clay lubricant allowing you to perform chemical and physical breakdown of contaminants with the use of a clay bar. 
NV PURIFY is a new advanced type of clay lubricant that not only reduces friction between the clay bar and the paintwork but also chemically breaks down iron and other contaminants to give you a more thorough decontamination process.

PURIFY specifically targets iron fall out and can help remove stubborn contamination from the paintwork. It also has an advanced lubrication formula which allows the clay bar to effortlessly glide over the surface.

This combination not only gives you a much deeper de-contamination process but helps prevent marring through the claying process.

 FEATURES and Benefits: 

• Helps Safely Dissolve Iron Contaminants & Fall Out
• Enhanced with cleaners to help Safely break down waxes & sealants
• Safely helps soften other stubborn surface contaminants before claying
• High Surface Lubrication
• Increases the effectiveness of claying
• Cuts down the time needed to clay each section
• Increases Paintwork Clarity

 DIRECTIONS:

1. Spray onto the exterior painted surface
2. Allow 30-45 seconds before beginning to clay
3. Start rubbing the clay lightly back & forth working in small sections
4. Let the product continue to react for 3-4 minutes in total.
5. Rinse off product  

NV CLARITY  STREAK FREE CLEANER 

Great for Glass cleaning

A versatile streak free cleaner that helps remove oils/residue, whilst also being a great glass cleaner!

Nv CLARITY is a highly effective streak-free cleaner that is able to remove oils and residue from any automotive surface. Due to the high evaporation rate of a regular IPA wipe down, it is suitable in lifting oils to the surface, but not effective in terms of removing them.

Through the use of Nv CLARITY you will be able to rid the surface of any polishing oils, or any other form of residue and ensure that the surface is completely clean. This is ideal before coating a car with a wax, sealant and especially a glass coating. 

CLARITY can also be used as a great glass cleaner, giving the product versatility and a number of uses. 

 Carpro  Eraser is an equivalent  product, both are great quality products.

GTECHNIQ PW PANEL WIPE COATING PREP

The GTECHNIQ PW PANEL WIPE COATING PREP is specifically formulated to remove oils and other residues from surface, prepping them for any coating application.

Many times polishing oils and residue can negatively effect the way sealants, waxes, or coatings bond to the surface.

PW PANEL WIPE COATING PREP is designed to remove all these oils and residues so that semi-permanent coatings, such as C1 Crystal Lacquer and EXOv2 Ultra Durable Hybrid Coating, can form a durable bond with your vehicle's paintwork.

• Removes all polish residues and leaves a 100% decontaminated surface
• Promotes bonding for all durable, chemically bonding coatings such as Crystal Serum Light, EXO and C5 Wheel Armour
• Contains no fragrances or colours

Directions:

• Simply spray PW directly onto a clean microfiber towel and wipe away, it is that easy!
• The unique blend of pure alcohols and aromatic solvents are formulated specifically to give adequate working time to remove and dissolve polish residues.
• PW will then evaporate to leave a 100% decontaminated surface!
• If you are looking for a surface that is truly clean and ready for any form of protection, use the Gtechniq PW Panel Wipe!

Exterior Ceramic Coating Surface Prep

Features and benefits

• Prep Solution for CquartzUK Coatings
• Cleans Paint Surfaces
• Removes Wax, Silicone & Other Contaminats
• Allow Product To Work For 30 Seconds

Description

JoyBond Fine Grade Clay Bar

JoyBond Fine Grade Clay Bar is the only high quality patented of professional detailing clay, MADE IN JAPAN. With a proper application, it will effectively and safely remove dust particles, rust, industrial fall-outs, over-sprays, tar spots and other stubborn contaminants without causing any harm to the original paint.

Most of these contaminants are not visible to the eyes but when you run your palm across the paintwork, you will find all these pollutants protruding the surface and has already embedded onto the finish. It will help to restore the smoothness of the paint surface, to improve the glossiness of the paint and to protect 

It is safe to be used on Glass Coating as well.

• Paint over-spray
• Tree sap
• Bug residue
• Industrial fallout 
• Stubborn dirt
• Rust
• Tar
  

Weight: 200grams

If you're not using JoyBond Fine Grade Clay Bar on your paint, then you're not seen the full gloss, that will reflect from a clean surface. 

JoyBond Fine Grade Clay, is safe on all types of vehicles, from cars, trucks, motorcycles, boats and Airplanes.

JoyBond Fine Grade Clay is clear-coat safe and can be used on paint, chrome, glass, fiberglass and plastic.

Directions for Use:

1. Thoroughly wash and rinse the entire vehicle. Make sure car is cool to touch.
2. Open up your clay bar and break off to a manageable piece, use a third of the piece. If it is too small, the clay may be slip off from your finger during the claying process.
3. Spray CARPRO IMMOLUBE (CLAY LUBRICANT) Clay Lube or any clay you have, on a 60cm x60cm  surface area.
4. Work on the clay by kneading and flattening it into a pancake shape using your thumb to about the size of your palm.
5. Apply a plenty amount of lubricant to paint surface so that the clay will be able to glide on the surface and will not mar the paint.
6. Working the clay to the paint surface, rubbing it gently back and forth against the paint, and move from edge to edge of the work area in straight line. You may adjust your finger’s pressure according to how dirty the paint is. Allow the clay to do the work, apply more lubrication if necessary.
7. As and when the surface of the clay is dirty, you need to fold and re-knead it to expose a fresh, clean surface of the clay. When the whole clay is very dirty
8. Dispose it and use the another clay.
9. After all contaminants have been removed, wipe away any residue or remaining lubricant off to ensure any loose soiling is removed from the surface.

Microfiber we use and recommenced 

If the Clay bar is dropped you need to bin it. I know it hurts! But you cannot use on the car again. MICROFIBER CLOTHS 

GTECHNIQ W5 CITRUS (APC) ALL PURPOSE CLEANER Concentrate

PH Neutral Biodegradable All Purpose Cleaner

The GTECHNIQ W5 CITRUS (APC) ALL PURPOSE CLEANER is biodegradable pH neutral formula removes road grime and bug splatter with ease. It can be used for many cleaning routines from engine bay de-greasing to carpet stain removal and is specifically formulated to provide very effective cleansing without removing coatings, waxes, sealants, or delicate trim and chrome parts.

Features & Benefits:

• Removes oil and grime with ease
• Will not remove wax or ceramic coatings
• 100% biodegradable
• pH neutral
• Can be used on a variety of substrates including carpets, alloy wheels & engine bays

Directions for use:

Use neat for heavy soiling and up to 10 parts water to 1 part product for light soiling
Spray neat or diluted directly onto the surface and allow to dwell for 5-10 minutes
Rinse residue and repeat if necessary. In extreme cases agitate surface with a clean microfiber cloth.

Recommended MF Cloth for W5 here

Recommend Dilution bottle for W5  here

Wowo's Fallout Remover

Wowo’s FALLOUT REMOVER is exactly what you need to remove the embedded particles and iron deposits in your paintwork. This is a necessary step in your car’s maintenance routine. Loaded with Surfactants, FALLOUT REMOVER dissolves iron and other particles causing a reaction that makes your car look as though its bleeding purple. But don’t worry! What you’ll end up with is smooth paintwork that’s ready for claying or polishing. Just spray on and let dwell, watch it bleed, then agitate the surface and rinse! Easy as that!

• ESSENTIAL PART OF THE DETAIL: Fallout Remover Helps Dissolve Particles Embedded in Your Paintwork.
• SAFE FOR ALL SURFACES: Can Also Be Used As A Wheel Cleaner To Quickly And Easily Remove Stubborn Brake Dust Particles
• FRESH LEMON SCENT: Most Fallout Removers On The Market Stink Pretty Bad – But Not Wowo’s FALLOUT REMOVER! Effectively Knocks Out Nasty Contaminants Without Knocking YOU Out Too!
• RICH LATHER: Loaded With Surfactants to Help Break Down Any Nasty Contamination Into A Rich Lather With Surface Agitation
• AMERICA'S PREMIER AUTOMOTIVE MICROFIBER and Detailing Products Manufacturer / Distributor Since 1999. THE RAG COMPANY - Always The Better Value!

How To Use:

1. Give the bottle a good shake
2. We Strongly recommend cleaning the vehicle before hand
3. Spray liberally all over the contaminated areas
4. Allow Fallout Remover to work and 'Bleed' the contaminants out of the paintwork
5. Don't let Fallout Remover dry on the panel
6. Rinse the vehicle thoroughly after use