CarPro Iron X Lemon Scent (IronX)

Highly effective, acid-free and pH balanced, CarPro Iron X stops rust spots and premature failure of the clear coat by making short work of iron contaminant removal across the entire vehicle! Using Iron X saves time and helps avoid the laborious claying process used in traditional car care regimes. This formulation of CarPro Iron X is safe and effective for use on all car surfaces and will not deteriorate clear coats. This preventative measure puts a stop to premature corrosion.

We are very proud to present Iron X Lemon Scent!! IronX LS (Lemon Scent) offers less harsh odour, but even more of the Brake Dust blasting power you have come to expect from the industry leader in brake dust removal... CarPro Iron X!
Iron X LS is an entirely new formula providing approximately 10% more iron dissolving power than ever before!  

Airborne chemical compounds and ferrous particles (particles containing iron) actually penetrate the paint and create corrosive compounds that eat deep into the paint's sub-layers.  This is a gradual process that is not evident until it's too late.

Iron X contains unique chemical ingredients that effectively dissolves the sintered iron by forming a water soluble iron complex. No other method cleans paint and wheels as deeply as Iron X. The Iron X Paint and wheels decontamination system was developed to remove the root of the problem (BELOW the top surface) rather than just shave off the top of the particle in the manner traditional claying offers.

During the use of your vehicle, brake dust and road grime become sintered to the surface of the paint, rims, and wheels due to the high temperatures they are exposed to. Brake dust contains high levels of iron and once sintered to the rim, becomes extremely difficult to dissolve or remove without the use of harsh chemicals. Iron X opens up the paint's pores to release ferrous particles and to neutralize caustic compounds that have developed in the paint's subsurface. Ongoing damage is immediately stopped and future damage is prevented, by removing the ferrous particles.

Iron X sprays on as a transparent liquid. As the cleansing liquid begins to work into the dirt and grime, the formula begins to turn purple or red.  This colouring effect is the Iron X Cleaner forming a bond to the sintered iron on the car paint or wheel and changing its state to a water-soluble complex for an easy wipe or rinse off.  Stubborn, baked on grime may take a small amount of agitation.

Iron X is widely used by body shops, high-end detailers, and even dealerships for new and used car prep.  It is proven to deliver a clean, glassy smooth vehicle free of iron contaminants.  No other iron decontamination product is as safe, fast, and effective! 

Features:

• Completely new formula with even more power!
• Removes Iron Particles and prevents the spread of iron-related damage & helps to protect your vehicle from paint system failure.
• Safe to use, Acid-Free, and pH neutral (pH 6-7).
• Safe to use on Clear Coat Paint
• Safe to use on Aluminum, Chrome, Alloy, or Clear coated wheels.
• Safe for use on all solid car surfaces and will not deteriorate clear coats. 

Directions:

1. Shake the bottle.
2. You can cover the surface with Iron X by spraying it everywhere but that can be wasteful. We recommend that you spray as needed and spread it with a small sponge or applicator to cover the entire surface. Evenly cover the surfaces you wish to decontaminate. The product is strong so you don’t have to be wasteful. Just make sure it contacts the entire surface.
3. Allow the product to dwell for 5 minutes in the shade. Do not allow it to dry in the sun. On light coloured paints you will see the product dissolving ferrous particles as it turns colour. On darker coloured paints everything is happening in exactly the same way. It’s simply more difficult for you to view the colour changing effect.
4. After allowing to dwell take a damp (not soaked) Paint safe Mitt or sponge (or other media if you prefer) and agitate the surface
5. Thoroughly rinse the surface.

Precautions:

• Avoid using on Fabric Convertible tops or rubber anything that contains recycled tires
• Keep out of reach of children and pets
• Do not ingest
• Use outside or in a ventilated area
• Avoid prolonged contact with your skin, We recommend Gloves. 
• Avoid inhalation
• Use PPE as needed 

 Iron X Facts and Frequently Asked Questions:

How iron particles appear on your car surface and where? 

Iron particles are all around us, and of course on our cars after travelling. They can be made from your car braking, driving near other cars, big trucks, train rails, industrial zones etc. They adhere to the car surface and once they "stick" to your paint due to there sharp edges together with sunshine they start to bake into the soft car paint where they oxidize and rust.

How to prevent iron dust from etching your paint?

It’s almost impossible to prevent the irons to stick on the surface, but it has been proven that inorganic coatings (CQuartz) has a self-cleaning effect and can reduce the quantity of iron that adheres to the surface. 

Is Iron X pH Neutral?

Yes

Why does it change colour?

With Iron X it is due to chemical reaction between the chemicals and iron.  Some other products change colours as well. There are very cheap chemicals other companies use that change their character simply by contact with air or iron but have zero to little dissolving power.

Why do you use fully plastic spray heads?

Iron X would react with normal triggers with metal springs inside.

Will Iron X stain chrome wheels or chrome trims?

No, it’s completely safe to use on any chrome wheels, trim, or bare aluminium wheels.

Will Iron X discolour wheel weights?

Yes, it will. Wheel weights are made from lead, Iron X will change the lead colour to green. However light agitation will recover the original colour.

Will Iron X affect brake calipers?

For most high-end calipers, it will not affect them however it can affect the paint colour of low quality acrylic painted calipers. For this reason, we advise you to be careful near calipers if unsure of the finish or type of paint.

Will Iron X remove wax from car paint? 

Yes, if it’s a highly organic oil type it will affect the wax properties. If it’s a synthetic polymer sealant it won’t affect it much. On CarPro Sealants, Cquartz coatings, or other true coatings it won’t affect them at all.  In fact, it is designed for use on coatings as well.

Does Iron X remove tar spots as well?

No, Iron X reacts only with iron particles.

Is Iron X safe to use on 3M and Paint Protection Film?

Yes, there is no problem at all using it on a clear bra and modern PPF when used properly.

Why does it smell so bad?

This is the nature of the chemical used, you cannot avoid this. If it doesn’t smell so strong it means it has a very little effect on iron or is a very diluted or inferior formula.

Why does Iron X have low viscosity?

If you make the product too thick it will not react well to iron particles due to the thickener additives. If you make it too thin there will only be a short reaction time, which will leave some iron behind. With Iron X we have found the sweet spot between these two variables to create the most potent but safe iron fallout remover on the market.

Can I leave Iron X to dry on the surface?

Yes, Iron X could dry on the surface of a modern gloss clear coat paint system as long as you wash it off, but do not let it dry on the surface when under direct sun. Even if it drys up don't worry, wipe it off. If it stains, just clean it with any polish.

It is not acid base.

NV PURGE  REACTIVE WHEEL CLEANER

This is especially designed solution that targets the dirt, grime and contaminant build-up on wheels.

PURGE also specifically dissolves the graphite compounds and deposits that are evident in automotive brake materials, allowing you to remove even the toughest of contamination.

DIRECTIONS

• Use Nitrile or protective gloves when working with PURGE
• Don't leave PURGE to react for longer than 5 minutes
  
• Don't leave PURGE reacting in direct sunlight
• For use on exterior painted surfaces ensure you remove all tar deposits with Carpro Tar X

Paint Decontamination Kit

CarPro Tar & Iron Removal Kit

1 x CarPro IronX LS X 500ml

Our CarPro Tar & Iron Decontamination Kit provides everything you need to easily remove iron, brake dust, tar, and organic particles from your car!

For more information on usage please see the individual product page. 

CarPro Iron X Snow Soap 

When creating Iron-X Snow Soap, we imagined the time that could be saved by combining the iron-fallout removing power of Iron-X, with the cleaning and lubricating capabilities of an environmentally friendly surfactant. This idea formed the basis of one of the most versatile, and effective maintenance products on the market.

By changing the dilution ratio Iron-X Snow Soap can be used as an iron-removing Snow Foam with a foam lance, with a mitten or sponge as a Shampoo, a Lubricant for clay and polymer decon products, or even a maintenance Wheel Cleaner. A true Multi-Purpose cleaner

  This is my monthly go to maintenance wash.

Features and Benefits: 

• Iron-Removing Multi-Use Cleaner
• Safe on all CQuartz coating
• Cuts through road grime & traffic film with ease
• Safe: pH Neutral PH Balance
• Safe: High Lubricity
• Quality: Utilises only the highest quality cleaning agents & emulsifiers
• Safe: Cleanses the bodywork gently with a rich foam
• Can be used on paint, glass, wheels, headlights, plastic trim, & clear bras
• Excellent on wheels  can  be applied directly to wheel and agitate the surface
• If you are after a stronger Iron remover use IronX
• It will start to remove wax from the car. It's great if you need to apply a coating or a sealant afterwards.

Directions: Using Hand Wash

• Wear glove during the wash process
• Rinse vehicle well
• Apply 1 squirt of Iron X Snow Soap directly to wash mitt and wash a panel
• Move to next panel(s) and repeat (rinse mitt and apply more product as needed based on the level of dirt in mitt) 
• Allow Snow Soap to react but rinse off before it is able to dry on the surface

Directions: Using Foam Canon

• Rinse vehicle well
• Add Iron X Snow Soap to Foam Cannon
• Set your foam cannon to provide the foam concentration you prefer
• Snow foam your car as normal and allow to dwell
• Wash gently but thoroughly with the wash mitt
• Rinse thoroughly
• NOTE: To get better results on this product I always use and recommend the hand wash method

Decontamination Tar & Iron Removal with Clay Bar bundle

• NV PURIFY - Advanced Clay Lubricant 500mL
• Concours Clay Bar 200g

NV PURIFY is a new advanced type of clay lubricant that not only reduces friction between the clay bar and the paintwork but also chemically breaks down iron and other contaminants to give you a more thorough decontamination process.

PURIFY specifically targets iron fall out and can help remove stubborn contamination from the paintwork. It also has an advanced lubrication formula which allows the clay bar to effortlessly glide over the surface.

This combination not only gives you a much deeper de-contamination process but helps prevent marring through the claying process.

 FEATURES: 

• Helps Safely Dissolve Iron Contaminants & Fall Out
• Enhanced with cleaners to help Safely break down waxes & sealants
• Safely helps soften other stubborn surface contaminants before claying
• High Surface Lubrication
• Increases the effectiveness of claying
• Cuts down the time needed to clay each section
• Increases Paintwork Clarity

 DIRECTIONS

1. Use gloves
2. Spray onto the exterior painted surface
3. Allow 30-45 seconds before beginning to clay
4. Start rubbing the clay lightly back & forth working in small sections
5. Let the product continue to react for 3-4 minutes in total.
6. Rinse off the product with pressure 

DS Clay Mitt Ultimate Fine Grade

The DS Clay Mitt Ultimate is a high quality Mitt.

It is the second generation of Clay Mitts on the market.

The DS Clay Mitt Ultimate is rubberised mesh coating that is attached to one side of the mitt to remove gloss hindering contaminants to give you the best finish possible.

With little to no effort tree sap, over-spray, tar, stubborn road grime, dirt, industrial fall-out, and so much more will be removed from your paint to fully prep your finish.

The DS Clay Mitt Ultimate  does not need to be re-kneaded, like traditional clay bars, and can be used again after dropping on the ground.

Decontaminate your car easier than ever with the the DS Clay Mitt Ultimate.

Decontaminating your car is an essential step to having the gloss you’ve always wanted.

Contaminants caused by everyday occurrences (tree sap, rail-dust), actually become embedded in your paint, hindering the gloss. This also prevents your polishes, sealants, Coatings and waxes from properly bonding with the paint, reducing their effectiveness.

Traditionally, we’ve always used clay bars to remove those contaminants, but it’s proved to be a bit of a mess.

You’re always having to re-knead the clay so you can have a clean section, and if you drop the bar, forget it; you’ll have to toss it and buy another. Plus, you can use the DS Clay Mitt Ultimate  as part of a wash with a high-lubricity shampoo, or you can use it on it's own with a quick detailer acting as a lubricant.

We use the the DS Clay Mitt Ultimate with Carpro  Immolube  here

NV PURIFY - Advanced Clay Lubricant 

A new and improved advanced clay lubricant allowing you to perform chemical and physical breakdown of contaminants with the use of a clay bar. 
NV PURIFY is a new advanced type of clay lubricant that not only reduces friction between the clay bar and the paintwork but also chemically breaks down iron and other contaminants to give you a more thorough decontamination process.

PURIFY specifically targets iron fall out and can help remove stubborn contamination from the paintwork. It also has an advanced lubrication formula which allows the clay bar to effortlessly glide over the surface.

This combination not only gives you a much deeper de-contamination process but helps prevent marring through the claying process.

 FEATURES and Benefits: 

• Helps Safely Dissolve Iron Contaminants & Fall Out
• Enhanced with cleaners to help Safely break down waxes & sealants
• Safely helps soften other stubborn surface contaminants before claying
• High Surface Lubrication
• Increases the effectiveness of claying
• Cuts down the time needed to clay each section
• Increases Paintwork Clarity

 DIRECTIONS:

1. Spray onto the exterior painted surface
2. Allow 30-45 seconds before beginning to clay
3. Start rubbing the clay lightly back & forth working in small sections
4. Let the product continue to react for 3-4 minutes in total.
5. Rinse off product  

CarPro TRIX Tar and Iron Remover

CarPro TRIX Tar and Iron Remover combines two paint decontamination steps into one, saving you time and money! This product is designed specifically for professional detailers to prepare vehicles for detailing using less time, materials, and labour.

CarPro TRIX is a strong degreaser, cleaner, tar remover and iron remover for virtually any exterior automotive surface.

Airborne chemical compounds and ferrous (iron-containing) particles penetrate auto paint and create corrosive compounds that eat into the paint's sub-layers. Detailing clay removes the particles but it doesn't remove their effects - corrosion may already be creeping under the paint's surface.

TRIX Tar and Iron Remover dissolves iron particles and tar to protect the paint finish from their destructive effects.

CarPro TRIX is a combination of Iron X plus special chemicals that remove tar and naphtha base components. What this means for pro detailers is that one product removes a variety of harmful contaminants from the paint. Meanwhile, TRIX de-greases the auto surface to prepare it for polishing.

After using TRIX, the paint will be impeccably clean.

CarPro TRIX has a pH neutral base chemical. It is safe on most auto surfaces. Use it on wheels, paint, glass, plastic trim, aluminum, and chrome. (Warning: do not let TRIX dry on plastics!)

CarPro TRIX Tar and Iron Remover is extremely easy to use. It does the work for you! Just spray it on, wait, and then wipe or rinse it off.

Professional detailers and auto restoration specialists will save a tremendous amount of time and labor with this single product. CarPro TRIX Tar and Iron Remover cuts prep time in half.

Directions:

• Shake very well before spraying product each time.
• Spray on the surface and let product react for 5 minutes maximum.
• Rinse off or wipe with a soft sponge or microfiber towel.
• Consumption for full cover average car : 150~200ml.
• Comes with Trigger Sprayer

GTECHNIQ W6 IRON AND GENERAL FALLOUT REMOVER

W6 Iron and General Fallout Remover is formulated to offer you the safest and most effective method of removing potentially damaging fallout commonly found on your vehicles paintwork and rims.

In addition to its exceptional fallout removing function, it also has a corrosion inhibitor plus, an additive designed to combat the effects of acid rain.

It is a thick gel-like formula that will cling to vertical surfaces.

Features & Benefits:

• Dissolves fallout & brake dust quickly
• Will not remove wax or sealants
• High-cling gel formula
• Corrosion inhibitor 

Application and Storage:

• Use in a well-ventilated area out of direct sunlight as the product has a very strong and unpleasant odour
• Remove loose dirt using a hose or jet wash.
• Spray W6 directly onto the surface and allow to dwell for 5-10 minutes.
• During this time any ferrous particles will dissolve forming a purple solution.
• Do not allow product to dry on the surface.
• Rinse residue and repeat if necessary.

6C Carpro Maintenance Bundle 500ml Kit

The CarPro Maintenance Bundle provides everything you need to easily maintain your ceramic coating!

The Kit includes the following:

• CarPro Reset: Car Wash Soap - Use Apply 25-30ml of Reset into a bucket with 10-15 litres of clean water..
• CarPro Iron X: Iron Removal - Use for decontamination every 3 to 6 months after washing with Reset.
• CarPro Tar X:  Tar Removal - Use as needed for Tar removal. Be careful around sensitive plastics, trim, rubber etc.
• CarPro Reload:  Spray Sealant. Apply every 3 months, after Iron X or Tar X treatment or anytime you like.
• CarPro Elixir: Ready to use quick detailer.

Wowo's Fallout Remover

Wowo’s FALLOUT REMOVER is exactly what you need to remove the embedded particles and iron deposits in your paintwork. This is a necessary step in your car’s maintenance routine. Loaded with Surfactants, FALLOUT REMOVER dissolves iron and other particles causing a reaction that makes your car look as though its bleeding purple. But don’t worry! What you’ll end up with is smooth paintwork that’s ready for claying or polishing. Just spray on and let dwell, watch it bleed, then agitate the surface and rinse! Easy as that!

• ESSENTIAL PART OF THE DETAIL: Fallout Remover Helps Dissolve Particles Embedded in Your Paintwork.
• SAFE FOR ALL SURFACES: Can Also Be Used As A Wheel Cleaner To Quickly And Easily Remove Stubborn Brake Dust Particles
• FRESH LEMON SCENT: Most Fallout Removers On The Market Stink Pretty Bad – But Not Wowo’s FALLOUT REMOVER! Effectively Knocks Out Nasty Contaminants Without Knocking YOU Out Too!
• RICH LATHER: Loaded With Surfactants to Help Break Down Any Nasty Contamination Into A Rich Lather With Surface Agitation
• AMERICA'S PREMIER AUTOMOTIVE MICROFIBER and Detailing Products Manufacturer / Distributor Since 1999. THE RAG COMPANY - Always The Better Value!

How To Use:

1. Give the bottle a good shake
2. We Strongly recommend cleaning the vehicle before hand
3. Spray liberally all over the contaminated areas
4. Allow Fallout Remover to work and 'Bleed' the contaminants out of the paintwork
5. Don't let Fallout Remover dry on the panel
6. Rinse the vehicle thoroughly after use