CarPro ImmoLube (Clay Lubricant) 

CarPro ImmoLube is a new innovation in lubricants that offers a non-stick formula for ease of use. This new solution will reduce the chances of marring on the paint and can be utilised as a clay or sanding lubricant. 

ImmoLube is a new lubrication solution that has been infused with a special mixture of solvents and surfactants that are designed to reduce surface friction whilst sanding, polishing or claying automotive surfaces. The non-stick formula offers enough viscosity to reduce marring and any chance of damaging the paint. ImmoLube also contains no gloss enhancers, or protective polymers and is easy to remove with a wash or simply an Eraser wipe down. 

 KEY BENEFITS

• A non-stick formula for ease of use
• Reduces the chance of marring on automotive surfaces 
• New innovative technology that provides simple and easy, quality lubrication 

 DIRECTIONS

• Dilute to suit purpose and tool
• Shake Well
• Spray over the sanding disc, or clay bar and over the work area
• Begin sanding or claying, keep surface lubricated
• Wipe off once complete or wash as needed

Carpro 3x Pack Clay Kit

1 x Grey Ultra Fine Clay 100gr bar (for use on brand new cars) 
1 x Green Fine Grade Clay 100gr bar (for use on cars with 15k on clock) 
1 x Yellow Medium Grade Clay 100gr bar (for use on cars 15k + on clock)

The CarPro 3 clays are an elastic clay that is easy to use and re-mold. When used in conjunction with a lubricant such as Carpro Immolube, you can expect a safe and thorough decontamination process that deep cleans the pores of paint that are otherwise invisible to the naked eye and are not cleaned by regular washing alone. 

This is perhaps the most important step in your procedure as it provides the clean base required for your protectant to adhere to.

3Clays gives you the flexibility to handle multiple decontamination levels for different cars or areas in the same product. 

For an even more thorough decontamination 3Clays can be used with  Concours Purify as a lubricant and powerful iron fillings remover. No clay bar alone will remove ferrous iron particles from a vehicles paintwork. 

Decontamination Tar & Iron Removal with Clay Bar bundle

• NV PURIFY - Advanced Clay Lubricant 500mL
• Concours Clay Bar 200g

NV PURIFY is a new advanced type of clay lubricant that not only reduces friction between the clay bar and the paintwork but also chemically breaks down iron and other contaminants to give you a more thorough decontamination process.

PURIFY specifically targets iron fall out and can help remove stubborn contamination from the paintwork. It also has an advanced lubrication formula which allows the clay bar to effortlessly glide over the surface.

This combination not only gives you a much deeper de-contamination process but helps prevent marring through the claying process.

 FEATURES: 

• Helps Safely Dissolve Iron Contaminants & Fall Out
• Enhanced with cleaners to help Safely break down waxes & sealants
• Safely helps soften other stubborn surface contaminants before claying
• High Surface Lubrication
• Increases the effectiveness of claying
• Cuts down the time needed to clay each section
• Increases Paintwork Clarity

 DIRECTIONS

1. Use gloves
2. Spray onto the exterior painted surface
3. Allow 30-45 seconds before beginning to clay
4. Start rubbing the clay lightly back & forth working in small sections
5. Let the product continue to react for 3-4 minutes in total.
6. Rinse off the product with pressure 

DS Clay Mitt Ultimate Fine Grade

The DS Clay Mitt Ultimate is a high quality Mitt.

It is the second generation of Clay Mitts on the market.

The DS Clay Mitt Ultimate is rubberised mesh coating that is attached to one side of the mitt to remove gloss hindering contaminants to give you the best finish possible.

With little to no effort tree sap, over-spray, tar, stubborn road grime, dirt, industrial fall-out, and so much more will be removed from your paint to fully prep your finish.

The DS Clay Mitt Ultimate  does not need to be re-kneaded, like traditional clay bars, and can be used again after dropping on the ground.

Decontaminate your car easier than ever with the the DS Clay Mitt Ultimate.

Decontaminating your car is an essential step to having the gloss you’ve always wanted.

Contaminants caused by everyday occurrences (tree sap, rail-dust), actually become embedded in your paint, hindering the gloss. This also prevents your polishes, sealants, Coatings and waxes from properly bonding with the paint, reducing their effectiveness.

Traditionally, we’ve always used clay bars to remove those contaminants, but it’s proved to be a bit of a mess.

You’re always having to re-knead the clay so you can have a clean section, and if you drop the bar, forget it; you’ll have to toss it and buy another. Plus, you can use the DS Clay Mitt Ultimate  as part of a wash with a high-lubricity shampoo, or you can use it on it's own with a quick detailer acting as a lubricant.

We use the the DS Clay Mitt Ultimate with Carpro  Immolube  here

Fine Clay Bar

The Concours CLAY Bar is now back in a new 200g variant, with better clay quality ensuring a finer and more safer claying process. 

We are confident that the new Concours CLAY bar is more durable, finer and safer to use - whilst still being a cost-effective and quality product. 

The use of this clay bar along with a Clay Lubricant, such as Concours PURIFY will allow for the safe removal of all contaminants such as industrial fallout, oxidation from acid rain, or exhaust pollutants. 

This unique clay bar allows us to combat the contamination on our cars, and get them ready to be waxed, sealed or coated. 

NV PURIFY - Advanced Clay Lubricant 

A new and improved advanced clay lubricant allowing you to perform chemical and physical breakdown of contaminants with the use of a clay bar. 
NV PURIFY is a new advanced type of clay lubricant that not only reduces friction between the clay bar and the paintwork but also chemically breaks down iron and other contaminants to give you a more thorough decontamination process.

PURIFY specifically targets iron fall out and can help remove stubborn contamination from the paintwork. It also has an advanced lubrication formula which allows the clay bar to effortlessly glide over the surface.

This combination not only gives you a much deeper de-contamination process but helps prevent marring through the claying process.

 FEATURES and Benefits: 

• Helps Safely Dissolve Iron Contaminants & Fall Out
• Enhanced with cleaners to help Safely break down waxes & sealants
• Safely helps soften other stubborn surface contaminants before claying
• High Surface Lubrication
• Increases the effectiveness of claying
• Cuts down the time needed to clay each section
• Increases Paintwork Clarity

 DIRECTIONS:

1. Spray onto the exterior painted surface
2. Allow 30-45 seconds before beginning to clay
3. Start rubbing the clay lightly back & forth working in small sections
4. Let the product continue to react for 3-4 minutes in total.
5. Rinse off product  

JoyBond Fine Grade Clay Bar

JoyBond Fine Grade Clay Bar is the only high quality patented of professional detailing clay, MADE IN JAPAN. With a proper application, it will effectively and safely remove dust particles, rust, industrial fall-outs, over-sprays, tar spots and other stubborn contaminants without causing any harm to the original paint.

Most of these contaminants are not visible to the eyes but when you run your palm across the paintwork, you will find all these pollutants protruding the surface and has already embedded onto the finish. It will help to restore the smoothness of the paint surface, to improve the glossiness of the paint and to protect 

It is safe to be used on Glass Coating as well.

• Paint over-spray
• Tree sap
• Bug residue
• Industrial fallout 
• Stubborn dirt
• Rust
• Tar
  

Weight: 200grams

If you're not using JoyBond Fine Grade Clay Bar on your paint, then you're not seen the full gloss, that will reflect from a clean surface. 

JoyBond Fine Grade Clay, is safe on all types of vehicles, from cars, trucks, motorcycles, boats and Airplanes.

JoyBond Fine Grade Clay is clear-coat safe and can be used on paint, chrome, glass, fiberglass and plastic.

Directions for Use:

1. Thoroughly wash and rinse the entire vehicle. Make sure car is cool to touch.
2. Open up your clay bar and break off to a manageable piece, use a third of the piece. If it is too small, the clay may be slip off from your finger during the claying process.
3. Spray CARPRO IMMOLUBE (CLAY LUBRICANT) Clay Lube or any clay you have, on a 60cm x60cm  surface area.
4. Work on the clay by kneading and flattening it into a pancake shape using your thumb to about the size of your palm.
5. Apply a plenty amount of lubricant to paint surface so that the clay will be able to glide on the surface and will not mar the paint.
6. Working the clay to the paint surface, rubbing it gently back and forth against the paint, and move from edge to edge of the work area in straight line. You may adjust your finger’s pressure according to how dirty the paint is. Allow the clay to do the work, apply more lubrication if necessary.
7. As and when the surface of the clay is dirty, you need to fold and re-knead it to expose a fresh, clean surface of the clay. When the whole clay is very dirty
8. Dispose it and use the another clay.
9. After all contaminants have been removed, wipe away any residue or remaining lubricant off to ensure any loose soiling is removed from the surface.

Microfiber we use and recommenced 

If the Clay bar is dropped you need to bin it. I know it hurts! But you cannot use on the car again. MICROFIBER CLOTHS