GTECHNIQ EXOV4 ULTRA DURABLE HYDROPHOBIC COATING durability (18-24 Months)

EXOv4 delivers a hard film that makes water-spots easy to remove, offers great resistance to all wash chemicals and can help withstand micro-marring. It produces a high-gloss, warm-looking, extreme hydrophobic finish.

It has a consistent film that is more durable and resistant to road salt and wash chemicals than its predecessors. Application is easy, with a slow flash-off time, giving more time to achieve a perfect finish.

All of the above combined with the introduction of a good degree of swirl resistance means EXOv4 represents a major leap forward in Last Surface Protection (LSP) technology.

Features & Benefits:

• Extreme hydrophobicity – water slides off treated surfaces
• Forms a hard film that makes water spots easier to remove
• Resistant to highly alkaline or acidic wash solutions
• Now aids the prevention of micro-marring
• Repels dirt, oils, & fallout
• Enhanced durability – lasts for up to 2 years
• Can be used as a stand-alone coating or as a top coat
• For cars up to medium estate (i.e. BMW 3 series touring) – select 30ml
• For larger cars, select the 50ml

Included in Kit:

• 1 x EXO v4 – 30ml or 50ml (please select from menu)
• 1 pair nitrile gloves
• 1 x AP2 Ultra Soft Foam Filled Applicator Pad
• 1 x Master Instruction Leaflet
• 1 x WS1 GTECHNIQ Window Sticker

Instructions:

• EXO v4 can be applied as a stand-alone sealant or as a top layer for Crystal Serum Light (CSL) or C1 Crystal Lacquer (recommended particularly for darker colours, easy to mark paintwork or if added swirl resistance and durability are required).
• Leave between 2 and 12 hours for C1 to cure before applying EXO v4
• Can be applied immediately over CSL (start at the same point and follow the panels in order). Do not leave CSL for longer than 24 hours if planning to apply EXO v4.
• Ensure vehicle is clean and dry, and the paintwork is swirl-free and prepared with Panel Wipe (not necessary if applying over C1 / CSL).
• Ensure panel is warmer than 5 degrees Celsius.
• Apply 5 – 10 drops of EXO v4 to the supplied applicator and work the liquid into the pad to get an even saturation.
• Apply to the panel using overlapping strokes, working an area of around 60cm x 60cm at a time.
• If the panel is 15 degrees C or lower, allow EXO v4 to cure for two minutes, then remove residue with a soft clean microfibre. For temperatures between 15 and 25 degrees C, allow one minute to elapse prior to buffing. For temperatures higher than 25 degrees, buff immediately.
• With a new microfibre, buff panels again to ensure all residue entirely removed.
• Apply a second layer of EXO v4 immediately, to ensure ease of buffing
• Allow EXO v4 to cure for a minimum of 12 hours prior to exposing it to rain.
• Allow at least 1 week before washing your vehicle.

Storage:

• Unopened bottles of EXO v4 have a 12-month shelf life from time of purchase
• Opened bottles of EXO v4 should be stored in a cool, dry area out of direct sunlight
• Opened bottles have a maximum life of 3 months

GTECHNIQ C1 CRYSTAL LACQUER COATING

C1 is extremely easy to apply and ideal for someone new to applying ceramic coatings, or for someone who wants a coating that is durable, but not too much hassle to apply.

With good gloss retention, C1 Crystal Lacquer becomes the functional surface of the cars paintwork, wand if applied by a GTECHNIQ Accredited Detailer comes with a 3 year guarantee.

C1 forms a crystalline film which is hard - this characteristic makes it effective at preventing minor scratching from poor wash technique on relatively soft automotive paint.

The coating is good for gloss retention, but because it does not add much additional gloss it is ideal for matte paint finishes.

Features & Benefits

• 3 years durability 
• Excellent swirl mark resistance
• Crystal clear finish
• Long-lasting protection from UV, dirt & swirl resistance
• Uses nano technology - a little goes a long way!
  
• Can be used on cars, motorcycles, boats & planes!
• Forms ultra strong chemical covalent bond with surface of paintwork
• Forms ultra hard sub-micron crystalline film inhibiting scratches & swirls

Application:

• Only apply in temperatures 5°c and above, indoors, out of direct sunlight
• Wear gloves provided
• Soak the application pad with several drops of product
• Replace the lid on the bottle and set to one side - holding in your hand while detailing your car may promote premature curing
• Spread product on a small panel, or ½ a large panel, at a time
• Remove residue immediately with a MF1 ZeroR Microfibre Buff Cloth
• You may need to buff the same area several times to remove residue, so use at least two MF1 cloths at any one time. Make sure you rotate the cloths quickly so that the C1 does not cure in them - this can make residue harder to remove
• Change your application pad after 3 to 4 applications
• If you miss removing residue and it cures fully, you should re polish this area and reapply C1
• As soon as you finish put your microfibres in water, wash them as soon as you can to prevent the product crystallising and making them unusable
• Leave your vehicle indoors for 12 hours before exposing it to the elements
• If you are applying EXO Ultra Durable Hydrophobic Coating or C2 Liquid Crystal over the C1, leave at least 4 hour before application
• Store in a cool, dry place
• Use product within 3 months of opening

CARPRO NAUTIK MARINE COATING 100ML KIT

CarPro presents revolutionary marine protection

NAUTIK nano-epoxy ceramic coating!

The evolution of boat protection came from the creators of CARPRO CQUARTZ, this incredible new protection method for all ships!

NAUTIK has been specially formulated to withstand the harsh conditions of seawater while providing protection against damage from the sun, algae, bamacles, discoloration and more!

In rivers and freshwater lakes, NOTHING resists algae better than NAUTIK. 

During the tests, Carpro found waste and algae to be eliminated with ZERO resistance.

NAUTIK has been designed to bind directly to gel-coat and fiberglass surfaces where it becomes a barrier between the surface and its environment.
Once installed, your boat becomes much easier to clean.

No need to constantly sand or polish the surface to clean it.

In the real world, algae, scum, and more were easily removed using a microfiber cloth.

Not only does its unique VOC-free formula protect the surface and make it much easier to maintain, it also strengthens and protects the shine of the finish for years to come.

Please allow 3 working days for pre-order before shipping.