Free Shipping on Orders Over $150* exclusions apply - Latitude Pay/Zip Pay/After Pay available
Wheel and Tyres
Caring for your wheels consists of properly removing contamination, polishing them to a high shine, then protecting them to make maintaining your wheels significantly easier. Stubborn brake dust can often be difficult to remove, but usually can be restored to a like new finish with the proper products and tools.
We recommend you maintain your wheels with a basic wash of soap and water with a dedicated wash mitt/brush every time you clean your vehicle (1 to 2 weeks). Thorough cleaning of your wheels and adding protection should be done every 2 to 3 months depending on usage.
Safely removes accumulated brake dust, oil, dirt, stains and light corrosion from premium quality wheels without damaging the delicate surface. Brake Buster Wheel Cleaner is a unique cleaning gel that adheres to the wheel surface and penetrates the dirt deposits to clean them away. Brake Buster contains corrosion inhibitors that deposit a thin layer of protection on the wheel to protect from future corrosion
Features and Benefits:
Foaming wheel cleaner
Acid-free formulation
Effectively removes brake dust
Safe on all wheel surfaces
Economical to use
Also excels as a tyre cleaner
Contains corrosion inhibitors that deposit a thin layer of protection on the wheel to protect from future corrosion
Directions:
Shake the bottle.
You can cover the surface with Brake Buster by spraying it everywhere on the RIM. We recommend that you spray as needed and spread it with a small sponge to cover the entire surface. Evenly cover the surfaces you wish to clean. The product is strong so you don’t have to be wasteful. Just make sure it contacts the entire surface.
Allow the product to dwell for 30 to 60 seconds. (Up to 2 minutes) in the shade. Do not allow it to dry in the sun.
Lightly brush and wash Rims as required.
Note: Can also be diluted 5:1.. If used weekly you may also dilute 10:1.
Highly effective, acid-free and pH balanced, CarPro Iron X stops rust spots and premature failure of the clear coat by making short work of iron contaminant removal across the entire vehicle! Using Iron X saves time and helps avoid the laborious claying process used in traditional car care regimes. This formulation of CarPro Iron X is safe and effective for use on all car surfaces and will not deteriorate clear coats. This preventative measure puts a stop to premature corrosion.
We are very proud to present Iron X Lemon Scent!! IronX LS (Lemon Scent) offers less harsh odour, but even more of the Brake Dust blasting power you have come to expect from the industry leader in brake dust removal... CarPro Iron X! Iron X LS is an entirely new formula providing approximately 10% more iron dissolving power than ever before!
Airborne chemical compounds and ferrous particles (particles containing iron) actually penetrate the paint and create corrosive compounds that eat deep into the paint's sub-layers. This is a gradual process that is not evident until it's too late.
Iron X contains unique chemical ingredients that effectively dissolves the sintered iron by forming a water soluble iron complex. No other method cleans paint and wheels as deeply as Iron X. The Iron X Paint and wheels decontamination system was developed to remove the root of the problem (BELOW the top surface) rather than just shave off the top of the particle in the manner traditional claying offers.
During the use of your vehicle, brake dust and road grime become sintered to the surface of the paint, rims, and wheels due to the high temperatures they are exposed to. Brake dust contains high levels of iron and once sintered to the rim, becomes extremely difficult to dissolve or remove without the use of harsh chemicals. Iron X opens up the paint's pores to release ferrous particles and to neutralize caustic compounds that have developed in the paint's subsurface. Ongoing damage is immediately stopped and future damage is prevented, by removing the ferrous particles.
Iron X sprays on as a transparent liquid. As the cleansing liquid begins to work into the dirt and grime, the formula begins to turn purple or red. This colouring effect is the Iron X Cleaner forming a bond to the sintered iron on the car paint or wheel and changing its state to a water-soluble complex for an easy wipe or rinse off. Stubborn, baked on grime may take a small amount of agitation.
Iron X is widely used by body shops, high-end detailers, and even dealerships for new and used car prep. It is proven to deliver a clean, glassy smooth vehicle free of iron contaminants. No other iron decontamination product is as safe, fast, and effective!
Features:
Completely new formula with even more power!
Removes Iron Particles and prevents the spread of iron-related damage & helps to protect your vehicle from paint system failure.
Safe to use, Acid-Free, and pH neutral (pH 6-7).
Safe to use on Clear Coat Paint
Safe to use on Aluminum, Chrome, Alloy, or Clear coated wheels.
Safe for use on all solid car surfaces and will not deteriorate clear coats.
Directions:
Shake the bottle.
You can cover the surface with Iron X by spraying it everywhere but that can be wasteful. We recommend that you spray as needed and spread it with a small sponge or applicator to cover the entire surface. Evenly cover the surfaces you wish to decontaminate. The product is strong so you don’t have to be wasteful. Just make sure it contacts the entire surface.
Allow the product to dwell for 5 minutes in the shade. Do not allow it to dry in the sun. On light coloured paints you will see the product dissolving ferrous particles as it turns colour. On darker coloured paints everything is happening in exactly the same way. It’s simply more difficult for you to view the colour changing effect.
After allowing to dwell take a damp (not soaked) Paint safe Mitt or sponge (or other media if you prefer) and agitate the surface
Thoroughly rinse the surface.
Precautions:
Avoid using on Fabric Convertible tops or rubber anything that contains recycled tires
Keep out of reach of children and pets
Do not ingest
Use outside or in a ventilated area
Avoid prolonged contact with your skin, We recommend Gloves.
Avoid inhalation
Use PPE as needed
Iron X Facts and Frequently Asked Questions:
How iron particles appear on your car surface and where?
Iron particles are all around us, and of course on our cars after travelling. They can be made from your car braking, driving near other cars, big trucks, train rails, industrial zones etc. They adhere to the car surface and once they "stick" to your paint due to there sharp edges together with sunshine they start to bake into the soft car paint where they oxidize and rust.
How to prevent iron dust from etching your paint?
It’s almost impossible to prevent the irons to stick on the surface, but it has been proven that inorganic coatings (CQuartz) has a self-cleaning effect and can reduce the quantity of iron that adheres to the surface.
Is Iron X pH Neutral?
Yes
Why does it change colour?
With Iron X it is due to chemical reaction between the chemicals and iron. Some other products change colours as well. There are very cheap chemicals other companies use that change their character simply by contact with air or iron but have zero to little dissolving power.
Why do you use fully plastic spray heads?
Iron X would react with normal triggers with metal springs inside.
Will Iron X stain chrome wheels or chrome trims?
No, it’s completely safe to use on any chrome wheels, trim, or bare aluminium wheels.
Will Iron X discolour wheel weights?
Yes, it will. Wheel weights are made from lead, Iron X will change the lead colour to green. However light agitation will recover the original colour.
Will Iron X affect brake calipers?
For most high-end calipers, it will not affect them however it can affect the paint colour of low quality acrylic painted calipers. For this reason, we advise you to be careful near calipers if unsure of the finish or type of paint.
Will Iron X remove wax from car paint?
Yes, if it’s a highly organic oil type it will affect the wax properties. If it’s a synthetic polymer sealant it won’t affect it much. On CarPro Sealants, Cquartz coatings, or other true coatings it won’t affect them at all. In fact, it is designed for use on coatings as well.
Does Iron X remove tar spots as well?
No, Iron X reacts only with iron particles.
Is Iron X safe to use on 3M and Paint Protection Film?
Yes, there is no problem at all using it on a clear bra and modern PPF when used properly.
Why does it smell so bad?
This is the nature of the chemical used, you cannot avoid this. If it doesn’t smell so strong it means it has a very little effect on iron or is a very diluted or inferior formula.
Why does Iron X have low viscosity?
If you make the product too thick it will not react well to iron particles due to the thickener additives. If you make it too thin there will only be a short reaction time, which will leave some iron behind. With Iron X we have found the sweet spot between these two variables to create the most potent but safe iron fallout remover on the market.
Can I leave Iron X to dry on the surface?
Yes, Iron X could dry on the surface of a modern gloss clear coat paint system as long as you wash it off, but do not let it dry on the surface when under direct sun. Even if it drys up don't worry, wipe it off. If it stains, just clean it with any polish.
