P&S Iron Buster Wheel & Paint Decon Remover is the color changing formula your car has been asking for.

P&S Iron Buster Wheel & Paint Decon Remover is an iron remover that is safe to use on your paint and wheels. P&S Iron Buster Wheel & Paint Decon Remover removes embedded contaminants without using harmful, acidic chemicals. Plus, P&S Iron Buster Wheel & Paint Decon Remover is fast and easy-to-use!

Just because your car looks clean, doesn’t mean that there aren’t embedded contaminants lurking on the surface. Washing and claying are certainly key factors in the decontamination process, but the unsung hero is a product that turns purple as it combats gunk. That product is P&S Iron Buster Wheel & Paint Decon Remover.

P&S Iron Buster Wheel & Paint Decon Remover is almost magic in a bottle. The product starts out as a yellowish colour, but once it hits iron particles on your vehicle, it starts to bleed purple. Don’t worry, this is a good thing!

P&S Iron Buster Wheel & Paint Decon Remover is finding all the ferrous particles that are hiding on your surface, prepared to ruin any finish.

Spray P&S Iron Buster liberally on your car's paint, ensuring you cover the entirety of the surface!

As the product begins turning purple, you know the iron contamination is being pulled from your paint!

P&S Iron Buster will also quickly remove brake dust from your wheels!

Just spray it on and watch the brake dust bleed away!

As powerful as P&S Iron Buster Wheel & Paint Decon Remover is at defeating iron, it is equally as safe. P&S Iron Buster Wheel & Paint Decon Remover is made without the use of acidic chemicals, with a balanced pH. It also safe to allow on both painted surfaces and wheels, without damaging the surfaces.

Plus, it’s easy-to-use! If you are decontaminating your paint, wash and dry your vehicle as normal first. It’s not necessary to do this for your wheels, but when doing wheels, it’s best to do a test spot first to avoid any possible staining. Then once the surface is ready, spray P&S Iron Buster Wheel & Paint Decon Remover and allow it dwell for 2-5 minutes. Once you see it bleed purple, it’s time to rinse it off with a hose or pressure washer. Repeat if needed and then move on to your next decontamination step!

Tip: Do not allow product to fully dry on surface.

DIRECTIONS:

• When using on paint, wash, and dry surface prior to product application for maximum effectiveness.
• Once the surface has been prepared, spray a generous amount of Iron Buster to the paint and the wheels.
• Allow product to dwell for 2-5 minutes.
• Do not allow product to fully dry on surface.
• Rinse thoroughly with water, using a hose or pressure washer.
• Repeat process if necessary - For a full deep clean use Brake Buster afterwards

*Important: Spot test on all wheel surfaces prior to application to avoid possible risk of staining or damage.