FREE Shipping on orders over $150 (Weight Restrictions Apply) Learn More
14.7022.1-4Inch
MTM Hydro's Italian Manufactured PF22 Foam Cannon is the new standard in the foaming industry. Whether you are foaming down your car on the weekend or you are a professional contract cleaner foaming hog barn for hours, this tool will save you time and money. Simply attach the foam cannon to your pressure washer using one of the included fittings, fill with your desired ratio of chemical and you are up and running.
New MTM Hydro PF22 launched in 2017 as the latest and greatest foam cannon to hit the world stage. The PF22 offers both, adjustable fan blades, and a two stage nozzle allowing you to spray vertically and horizontally. By adjusting the fan blades (narrow or jet) MTM Hydro Foam cannons throw thick foam onto your vehicle, pole barn siding, house, fence, sidewalk, roof or other washable items. The chemical injection knob on top of the PF22 also clicks and allows for precise measurement of more or less chemical to be drawn through the internal chamber, increasing or decreasing the foam output. This allows the internal agitator to create a dense foam that is stickier than the Chinese knock-off foam cannons. In doing so, this thick foam has a longer dwell time which allows the chemical to work on the cleaning surface for longer in its effort to emulsify the dirt and grime. some surfaces may still require some elbow grease, however, if the chemical does its job, very little (if any) scrubbing is required.
NOTE A specific 1/4" Male plug may be required in order to attach the QC plug to the end of some residential pressure washer setups. MTM Hydro 1/4" plugs are standard for industrial use but many residential pressure washers such as Greenworks, Ryobi, AR Blue Clean,etc... have certain models where the coupler will not receive an MTM plug. Not all of these brands are impacted, just certain models. If you look closely, the Chamfer at the end of an MTM plug as well as the neck is, 1.5mm shorter than some couplers may allow.
Contents of the Standard PF22 Foam Cannon Kit:
specs:
Foam Cannon Connector Chart
Please note that All Adaptor will be sent with a 1/4m to 1/4m Connector to your PF22. Please review the chart before making a purchase.
See Chart below
Info on the PF-22 foam canon
Note: The full spectrum of ratings are not supported by the 3.5 or 3.0 orifices included with this kit. Other orifices may be required for higher flow machines that have lower PSI- Example: 2000 PSI with 3.5 GPM requires a 5.0 Orifice. For larger orifices, you will know it does not work because you will experience starting and stopping of the foam cannon as your unloader slips in and out of bypass. You will also get watery foam as the orifice size 3.5 is significantly smaller than the 5.0 needed for your machine. MTM Foam Cannons will not work with flow sensing unloaders as you will experience the same results listed for an under-sized orifice. See below for additional orifice sizes and replacement items available for purchase.
PF22.2 Professional Foam Cannon Features
PF22.2 Professional Foam Cannon User Manual
PF22.2 Professional Foam Cannon - Users Manual -diagrams
Please allow extra time for delivery to regional and remote areas.
Free Shipping on orders over $150 excluding remote areas and certain weight restrictions apply for free shipping in each state.
The following qualifies for free shipping: We select whether we use courier or Australia Post depending on address. if you would like to ship with Australia Post please select Parcel Post.
Note: We do not ship to PO Boxes or Parcel Lockers with free shipping.
*We will not be held responsible for delays or late delivery of Australia Post or courier services.
*If a parcel does not arrive as anticipated, please allow 5-7 working days for Australia Post or couriers to complete process of tracking and locating as in most cases it turns up after 3-7 days of expected delivery. We cannot refund or send another item until this process is completed.
*We don't take responsibility for orders that are lost or stolen once the parcel has been delivered to the correct delivery address.
*Items that are over 21kg may require to pay extra freight costs if in regional or remote areas - we will contact you if this is the case.
All of our prices are in Australian dollars (AUD) and include GST (Goods and services tax)
At The Detailing Shed, we’re committed to supplying premium-grade car care products. Due to the nature of many of our items, particularly chemicals, our return policy has recently been updated. Please review the following carefully before submitting a return or refund request.
Unused and unopened accessories such as brushes, pads, and towels may be eligible for return, pending approval by our customer service team. Email us at info@detailingshed.com.au with your order number and photos of the item(s) to request approval.
If you receive a damaged or incorrect item, please notify us within 10 days of delivery. Send an email to info@detailingshed.com.au with your order number and clear photos of the issue. We’ll work quickly to arrange a replacement or refund if stock is unavailable.
If you're returning an item valued over $50, we recommend using a trackable shipping service or purchasing shipping insurance. We are not responsible for returned items that are lost in transit.
If an item hasn’t arrived, please allow 7–15 business days after Australia Post or the courier begins their investigation. We’ll notify you once your case is resolved and any refund or replacement is processed.
Please note: Product packaging or colours may vary from online images due to manufacturer updates. Refunds will not be issued for these variations unless the product is faulty or incorrect.
We're here to help
If you need to contact us for advice on any of the products, please email us at info@detailingshed.com.au
Please include description of the product you are interested. Some info of you car, and also what you are trying to achieve.
We may also review our blogsfor product recommendations.
