Kit Includes:

1. 1 x CQuartz UK Edition  30ml or 50ml bottle (15ml+/- per coat)
2. 1x 100ml bottle of CarPro Reload Silica Spray
3. 1x  Applicator Block
4. 5x 4" Microfiber Suede Applicators
5. 1x 16" Microfiber Suede Towel

Features:

This is the best ceramic coating Kits for cars. It includes everything you need to Wash, Decontaminate, Polish, Coat and add Slickness to your finish and protect it for years 

Transform and protect your pride & joy with this new paint protection bundle, offering breathtaking gloss, superior protection, and amazing water beading. Keeps your car cleaner for longer, easier to maintain and protect from the elements for years to come. 

 Give your vehicle the ultimate protection with this new Paint Protection Bundle. This bundle contains everything you need to completely wash & decontaminate your paintwork, and apply innovative glass coating protection to bring your vehicle to the next generation of car care.  

 Key Benefits:

1. Cquartz UK 3.0: Extremely deep gloss that lasts!, Easy maintenance with "self-cleaning" properties (Stays cleaner than other products on the market) 70% Quartz with 99.9% purity

2. Protection and gloss superior to that of competitor "professional coatings" but easy to use for all detailers and DIY's
3. 70% Quartz with 99.9% purity
4. An extremely deep gloss that lasts!
5. Easy maintenance with "self-cleaning" properties (Stays cleaner than other products on the market)
6. Resistance to wash induced marring, bird dropping damage, stains, high or low temperatures, and traffic film
7. Repels UV rays, water, oils, dirt, and contaminants
8. Optional: SCHOLL CONCEPTS S20 BLACK Polish. This is designed to do aggressive compounding and polishing to almost complete perfection.  Depending on the pad used, you can control how aggressive you go.

Kit Includes:

• 1 x Cquartz UK 3.0 30mL Kit (2019 V3.0) included in the Kit:
• 1x 30ml bottle of CQuartz UK Edition (15ml+/- per coat)
• 1 x 100ml bottle of CarPro Reload Silica Spray.
• 1x Applicator Block.
• 5 x 4" Microfiber Suede Applicators
• 1x 16" Microfiber Suede Towel

• 1x CarPro Reset 500 ml (Shampoo): Reset breaks down road grime and traffic films with the power of an alkaline cleaner, whilst being as gentle on the surface as a pH-neutral shampoo.
• 1x CarPro Eraser 500ml: Remove any leftover polishing oils with Eraser so the Ceramic Cquartz Coating can properly bond.
• 1x NV PURIFY 500ml: Helps Safely Dissolve Iron Contaminants & Fall Out, this is used as a clay lubricant.
• 1x Concours CLAY 200g: Allow for the safe removal of all contaminants such as industrial fallout, oxidation from acid rain, or exhaust pollutants.
• 4 x MF 330GSM Paint protection and removal cloth (2 Red 2 Yellow): Wipe off the residue from the CquartzUK with the Red or Yellow cloth.
• 2x MF (Green cloth) (multi-Use Cloth) Can be used for Polish or eraser to wipe down prior to coating. Green MF can be used with reload also.
• Optional: 1x SCHOLL CONCEPTS S20 BLACK 1-STEP COMPOUND Polish 500g

Directions:

1. Wash with Reset or any other shampoo ( Avoid any shampoo with gloss enhancers or Wax)

2. Before you dry the car fully, start Spraying NV PURIFY onto the paintwork, (approximately  60 x 60cm area) leave on the vehicle for a 1 minute  or until you see the surface change colour.

3. Gently slide the clay bar across the surface, you may require to spray more NV Purify if needed.

4. After the car has been successfully decontaminated using NV PURIFY with the  CLAY bar move to next section.

5. Wash the car again with CarPro Reset to get rid of all impurities off the surface.
6. Perform hand or machine polishing (if needed) the surface has swirls.
7. After the decontamination process is complete, and any polishing stages have been completed.
8. Wipe the car down with CarPro Eraser. (using Green Microfibre Towels)
9. Begin to apply CarPro CQUARTZ UK 3.0 (2018) onto the car through the use of the supplied suede applicators and block. Level the coating as per the instructions on the Cquartz UK product page. Also, use the Red/Yellow Supersoft Microfibers to wipe off the coating, and get ready for a glossy, and protective layer.

Note: If you don't feel confident after reading our instructions on both this product page and the CQUARTZ UK page, it may be a good idea to do some of your own research on CQUARTZ UK, watching some videos on how it is applied, and reading some different accounts and descriptions to give you a great understanding on the process and whats involved. If you require any additional assistance in applying CQUARTZ, don't hesitate to email us and we will be able to help you out with the procedure.

You may also email us and request a phone callback. We will be able to help you if you have any concerns applying the coating.

Aditional info is located under the documents section on the website.

This is fine ceramic coating Kits for cars. It includes everything you need to Wash, Decontaminate, Polish, Coat and add Slickness to your finish and protect it for years 

Transform and protect your pride & joy with this new paint protection bundle, offering breathtaking gloss, superior protection, and amazing water beading. Keeps your car cleaner for longer, easier to maintain and protect from the elements for years to come. 

 Give your vehicle the ultimate protection with this new Paint Protection Bundle. This bundle contains everything you need to completely wash & decontaminate your paintwork, and apply innovative glass coating protection to bring your vehicle to the next generation of car care.

This is one of the best ceramic coatings for cars. Check out many reviews on the net. You will not be disappointed.  

 Key Benefits:

1. Semi Profesional DIY ceramic coating, simple to apply.

2. Cquartz UK 3.0 2019: Extremely deep gloss that lasts!, Easy maintenance with "self-cleaning" properties (Stays cleaner than other products on the market) 70% Quartz with 99.9% purity

3. Protection and gloss superior to that of competitor "professional coatings" but easy to use for all detailers and DIY's
4. 70% Quartz with 99.9% purity
5. An extremely deep gloss that lasts!
6. Easy maintenance with "self-cleaning" properties (Stays cleaner than other products on the market)
7. Resistance to wash induced marring, bird dropping damage, stains, high or low temperatures, and traffic film
8. Repels UV rays, water, oils, dirt, and contaminants
9. Optional: SCHOLL CONCEPTS S20 BLACK Polish. This is designed to do aggressive compounding and polishing to almost complete perfection.  Depending on the pad used, you can control how aggressive you go.

Kit Includes:  ceramic paint protection kit

• 1 x Cquartz UK 3.0 30mL Kit (2019 V3.0) included in the Kit:
• 1x 30ml bottle of CQuartz UK Edition (15ml+/- per coat)
• 1 x 100ml bottle of CarPro Reload Silica Spray.
• 1x Applicator Block.
• 5 x 4" Microfiber Suede Applicators
• 1x 16" Microfiber Suede Towel

• 1x CarPro Reset 500 ml (Shampoo): Reset breaks down road grime and traffic films with the power of an alkaline cleaner, whilst being as gentle on the surface as a pH-neutral shampoo.
• 1x CarPro Eraser 500ml: Remove any leftover polishing oils with Eraser so the Ceramic Cquartz Coating can properly bond.
• 1x CarPro IronX 500ml:  Helps Safely Dissolve Iron Contaminants & Fall Out, this is used with no clay
• 4 x MF Paint protection and removal cloth (2 Red 2 Yellow): Wipe off the residue from the CquartzUK with the Red or Yellow cloth.
• 2 x Spray Triggers

Directions:

1. Wash with Reset or any other shampoo ( Avoid any shampoo with gloss enhancers or Wax)
2. Start spraying Carpro Iron-X onto the paintwork. Leave on the vehicle for a few minutes until you see the surface change colour, once it changes colour use a sponge/mitt and agitates the surface.
3. After the car has been successfully decontaminated through the use of Carpro Iron-X
4. Wash the car again with CarPro Reset to get rid of all impurities off the surface.
5. Perform hand or machine polishing (if needed) the surface has swirls.
6. After the decontamination process is complete, and any polishing stages have been completed.
7. Wipe the car down with CarPro Eraser. (Using Red Microfibre Towels)
8. Begin to apply CarPro CQUARTZ UK 3.0 (2018) onto the car through the use of the supplied suede applicators and block. Level the coating as per the instructions on the Cquartz UK product page. Also, use the Red/Yellow Supersoft Microfibers to wipe off the coating, and get ready for a glossy, and protective layer.

Note: If you require any additional assistance in applying CQUARTZ, don't hesitate to email or Call us and we will be able to help you out with the procedure.

This is my Favourite kit because no claying is required. Its great for newer cars. 

CarPro CQuartz UK Including Eraser [To Prep New Car]

 This car detailing kit is designed for hot and cold climates:

It includes everything you need to prepare the surface before coating.
This Kit will Coat and add Slickness to your finish and protect it for years 

Transform and protect your pride & joy with this new paint protection. It will offer breathtaking gloss, superior protection, and amazing water beading. Keeps your car cleaner for longer, easier to maintain and protect from the elements for years to come. 

 Give your vehicle the ultimate protection with this new Paint Protection Kit. 

 Key Benefits:

1. Cquartz UK 3.0 2019: Extremely deep gloss that lasts!, Easy maintenance with "self-cleaning" properties (Stays cleaner than other products on the market) 70% Quartz with 99.9% purity

2. Protection and gloss superior to that of competitor "professional coatings" but easy to use for all detailers and DIY's
3. 70% Quartz with 99.9% purity
4. An extremely deep gloss that lasts!
5. Easy maintenance with "self-cleaning" properties (Stays cleaner than other products on the market)
6. Resistance to wash induced marring, bird dropping damage, stains, high or low temperatures, and traffic film
7. Repels UV rays, water, oils, dirt, and contaminants
8. Optional: SCHOLL CONCEPTS S20 BLACK Polish. This is designed to do aggressive compounding and polishing to almost complete perfection.  Depending on the pad used, you can control how aggressive you go.

Kit Includes:

• 1 x Cquartz UK 3.0 30mL Kit (2019 V3.0) included in the Kit:
• 1x 30ml bottle of CQuartz UK Edition (15ml+/- per coat)
• 1 x 100ml bottle of CarPro Reload Silica Spray.
• 1x Applicator Block.
• 5 x 4" Microfiber Suede Applicators
• 1x 16" Microfiber Suede Towel

• 1x CarPro Eraser 500ml: Remove any leftover polishing oils with Eraser so the Ceramic Cquartz Coating can properly bond.
• 2 x MF Paint protection and removal cloth (1 Red 1 Yellow): Wipe off the residue from the CquartzUK with the Red or Yellow cloth.

Directions:

1. Wash with Reset or any other shampoo ( Avoid any shampoo with gloss enhancers or Wax)
2. If required use Clay lubricant with Claybar.
3. Wash the car again if you performed the clay process.
4. If the surface has swirls perform hand or machine polishing.
5. Before applying the coating, Wipe the car down with CarPro Eraser using Red or yellow Microfibre Cloths
6. Begin to apply CarPro CQUARTZ UK 3.0 (2018) onto the car through the use of the supplied suede applicators and block. Level the coating as per the instructions on the Cquartz UK product page. Also, use the Red/Yellow Supersoft Microfibers to wipe off the coating, and get ready for a glossy, and protective layer. (you will need to use the red and yellow microfibre cloths for the wiping of the coating.

Note: If you don't feel confident after reading our instructions on both this product page and the CQUARTZ UK page, it may be a good idea to do some of your own research on CQUARTZ UK, watching some videos on how it is applied, and reading some different accounts and descriptions to give you a great understanding on the process and whats involved. If you require any additional assistance in applying CQUARTZ, don't hesitate to email us and we will be able to help you out with the procedure.

You may also email us and request a phone callback. We will be able to help you if you have any concerns about applying the coating.

The Ultimate in Ceramic coating Kits we  now offer

GTECHNIQ Bundle Using C1 Crystal Lacquer Coating for [Newer Car Medium contaminants]

This is fine ceramic coating Kits for cars. It includes everything you need to Wash, Decontaminate, Coat and add Slickness to your finish and protect it for up to 3 years.

You will receive 2 coating packs for the work. 

Transform and protect your pride & joy with this new paint protection bundle, offering breathtaking gloss, superior protection, and amazing water beading. Keeps your car cleaner for longer, easier to maintain and protect from the elements for years to come. 

 Give your vehicle the ultimate protection with this new Paint Protection Bundle. This bundle contains everything you need to completely wash & decontaminate your paintwork, and apply innovative coating protection to bring your vehicle to the next generation of car care.

This is a new offering by Detailing Shed.

C1 with EXO combine to give your car that deep gloss that will last for years.

You will not be disappointed.  

Key Benefits:

GTECHNIQ C1 CRYSTAL LACQUER COATING

• This is extremely easy to apply and ideal for someone new to applying ceramic coatings, or for someone who wants a coating that is durable, but not too much hassle to apply.
• Easy maintenance with "self-cleaning" properties 
  
• An extremely deep gloss that lasts!
• Resistance to wash induced marring, bird dropping damage, stains, high or low temperatures, and traffic film

• Excellent swirl mark resistance
• Crystal clear finish
• Long-lasting protection from UV, dirt & swirl resistance
• Uses nano technology - a little goes a long way!
• Can be used on cars, motorcycles, boats & planes!
• Forms ultra strong chemical covalent bond with surface of paintwork
• Forms ultra hard sub-micron crystalline film inhibiting scratches & swirls

GTECHNIQ EXOV4 ULTRA DURABLE HYDROPHOBIC COATING

• Extreme hydrophobicity – water slides off treated surfaces
• Forms a hard film that makes water spots easier to remove
• Resistant to highly alkaline or acidic wash solutions
• Now aids the prevention of micro-marring
• Repels dirt, oils, & fallout
• Enhanced durability – lasts for up to 2 years
• Can be used as a stand-alone coating or as a top coat
• For cars up to medium estate (i.e. BMW 3 series touring) – select 30ml
• For larger cars, select the 50ml

Included in the GTECHNIQ C1 and EXO Coating Ultimate Bundle

• 1 x 30 or 50ml GTECHNIQ C1 CRYSTAL LACQUER COATING
• 1 x 30ml or 50ml kit GTECHNIQ EXOv4 ULTRA DURABLE COATING
• 1 x 500 ml  GTECHNIQ G-Wash 
• 1 x 500 ml GTECHNIQ W6 IRON FALLOUT REMOVER & DECONTAMINANT
• 1 x 500ml GTECHNIQ PW PANEL WIPE COATING PREP 
• 6 x MF Paint protection and removal cloth
• 2x ICE GreyThe Rag Company THE CERAMIC COATING TOWEL EDGELESS PEARL for C1
• 2x ICE Grey The Rag Company THE CERAMIC COATING TOWEL EDGELESS PEARL for EXO
• 2 x Blue Microfiber cloths for - Panel Wipe 
• 2 x Spray Triggers

• Optional: SCHOLL CONCEPTS S20 BLACK Polish. This is designed to do remove minor swirls
  
• Optional: Clay Vehicle if requires. Thats only if the W6 IRON FALLOUT REMOVER & DECONTAMINANT has not removed all contaminants.
• Make sure you have good quality lighting. See the scangrip range if required here

Directions:

1. Wash with GTECHNIQ G-Wash or any other shampoo ( Avoid any shampoo with gloss enhancers or Wax)
2. Wipe down panels with a Microfibre drying Towel
3. Spray GTECHNIQ W6 IRON FALLOUT REMOVER & DECONTAMINANT directly onto the surface and allow to dwell for 5-10 minutes. During this time any ferrous particles will dissolve forming a purple solution.
4. Hose the product off the car. Reapply a second time if required.
5. After the car has been successfully decontaminated through the GTECHNIQ W6 IRON AND GENERAL FALLOUT REMOVER
6. Wash the car again with GTECHNIQ G-Wash or any other shampoo to get rid of all impurities off the surface.
7. Perform hand or machine polishing (if needed) if the surface has no swirls. Skip this step.
8. After the decontamination process is complete, and any polishing stages have been completed.
9. Wipe the car down wit GTECHNIQ PW PANEL WIPE COATING PREP . (Using d Blue Microfibre Towels provided

Apply the GTECHNIQ C1 CRYSTAL LACQUER COATING:

Follow the instructions below

• Wear gloves provided
• Soak the applicator AP2 pad with several drops of product
• Replace the lid on the bottle and set to one side - holding in your hand while detailing your car may promote premature curing
• Spread product on a small panel, or ½ a large panel, at a time
• Remove residue immediately with a ICE Grey Microfibre Buff Cloth provided.
• You will need to buff the same area a second times to remove residue, so use at least two of the ICE Grey MF cloths at the one time.
• Make sure you rotate the cloths quickly so that the C1 does not cure in them - this can make residue harder to remove
• If you miss removing residue and it cures fully, you should re polish this area and re-apply C1
  
• As soon as you finish put your microfibres in water, wash them as soon as you can to prevent the product crystallising and making them unusable. Do not use the MF cloths no you paint jobs as they may still have crystalised.
• Leave your vehicle indoors for 12 hours before exposing it to the elements
• If you are applying EXO Ultra Durable Hydrophobic Coating or C2 Liquid Crystal over the C1, leave at least 4 hour before application
  

Apply the GTECHNIQ EXOv4 ULTRA:

Follow the instructions below

• Leave between 4 for C1 to cure before applying EXO v4
• EXO can be applied immediately over CSL (start at the same point and follow the panels in order). Do not leave CSL for longer than 24 hours if planning to apply EXO v4.
• Apply 5 – 10 drops of EXO v4 to the supplied AP2 applicator and work the liquid into the pad to get an even saturation.
• Apply to the panel using overlapping strokes, working an area of around 60cm x 60cm at a time.
• If the panel is 15 degrees C or lower, allow EXO v4 to cure for two minutes, then remove residue with a soft clean using a microfibre cloth. For temperatures between 15 and 25 degrees C, allow one minute to elapse prior to buffing.
• For temperatures higher than 25 degrees, buff immediately.
• With ICE Grey Microfibre Buff Cloth provided buff panels to ensure all residue entirely removed.
• With the second ICE Grey Microfibre cloth provided, buff panels to ensure all residue is entirely removed.
• Allow EXO v4 to cure for a minimum of 12 hours prior to exposing it to rain.
• Allow at least 1 week before washing your vehicle.
  

1. Note: If you require any additional assistance in applying GTECHNIQ Coatings
   don't hesitate to email or Call us and we will be able to help you out with the procedure.

Applying Gtechniq Panel Wipe video

Applying Gtechniq C1 Crystal Lacquer and EXO Ultra Durable Hybrid Coating Video

CarPro ECH2o Concentrate 

Waterless Wash, High Gloss Detail Spray, Rinse-less Wash, and Clay Lubricant

EcH2o is an entirely new waterless cleanser and gloss-enhancer built on 2 years of research and development by CarPro Chemicals!  EcH2o was designed to work in harmony with ceramic coatings and even provides easy cleaning of non-coated or waxed surfaces!  Based on a SiO2 hybrid framework and an eco-friendly organic lubricant solution, EcH2o safely cleans and glosses a variety of exterior vehicle surfaces with ease!  

Paint and chrome take on an entirely new level of gloss and reflection with this incredible formula and better yet it is easy to use even in extreme heat and direct sun on painted surfaces!  Our solution to providing a swirl free and eco-friendly waterless experience is a blend of proprietary lifting agents combined with natural organic extracts and lubricants. 

The secret to the safe cleansing abilities provided by EcH2o is a combination of its modified high gloss SiO2 component and its innate cleansing abilities, which easily removes dust and light dirt whilst leaving behind a wet, glass-like surface! The finish left by EcH2o mimics the incredible properties that have become synonymous with CarPro SiO2 sealants and CQuartz coatings throughout the years!

In conjunction with a quality microfiber towel, the lubricants aid in safely removing the larger particles from the surface while the remnants of the EcH2o solution become an active cleaner across the surface and begin to loosen any particulates that were left behind.  Before the final step (noted in the product directions) the solution may dry to a fine haze indicating it is ready to wipe off any remaining product effortlessly!

Features:

• High Gloss SiO2 Hybrid Detail Spray
• Incredible waterless wash!
• Also excels at rinse-less, & clay lubricant
• Safely cleans without swirls
• Works great even in direct sun
• Eco-Friendly
• Amazing on chrome
• Excellent on rubber and plastic trim - Does not stain
• Fast & Easy
• Versatile works well on many materials
• Works great on both coated and un-coated vehicles
• Quick detailer concentrate form

Dilutions:

• 1L makes up to 16 litres of (1:15) Waterless Spray
• 1L makes up to 26 litres of Quick Detailer (1:25)
• 1L makes up to 40 litres of Clay Lubricant (1:40)
• 1L makes up to 200 litres of Rinse-less Wash (1:200)

Directions:

Quick Detailer:

1. Shake well and dilute 1:15 ~ 1:25
2. Spray, spread, and wipe off completely

Waterless Wash:

1. Shake well and dilute 1:10 ~ 1:15
2. Spray liberally across one entire panel
3. MF towel flipping towel to fresh sides often
4. Spray once more across the panel surface
5. Using a fresh  towel wipe surface removing the remainder of dust and dirt
6. Move to next panel, repeat steps 2-5, and continue around the vehicle
7. A final wipe entire vehicle with a fresh clean towel as needed

Clay Lubricant: 1:40 

Rinse-less Wash:  

1. Mix 3 gallons of water with 2-3 ounces of Ech2o in a bucket with Grit Guard
2. Fill another 5-gallon bucket with grit guard and ONLY clean water
3. Submerge MF Microfiber Towel in the solution bucket  
4. Fold Towel in half and drag slowly across surface no pressure across 1/4 of a panel
5. Flip Towel and do a couple other passes on the next 1/4 of panel
6. Flip Towel Inside out and repeat using all 4 sides to complete one panel
7. Use a separate clean soaked towel for final buffing wipe
8. Use a DRY suitable drying towel to dry the panel completely before moving on to next panel
9. Wash the dirty towels in your rinse bucket OR use a new towel submerged and repeat steps 3-8

Carpro Ech2O FAQ: 

Can I use Ech2o in the sun as a waterless or detail spray? 

Absolutely, it works very well even in direct sun. 

Can I use Ech2o as a rinse-less wash?  

Yes! Our Rinse-less wash testers found Ech2o to perform better than the products they have used until now. 

Is Ech2o a cleaner?  

Yes, it is a waterless wash that’s tough on dirt but gentle on the vehicle.  It gently lifts dirt and contaminants from the surface.

Does Ech2o have protection in it? 

Ech2o does have some Sio2 (quartz) protection in it BUT its main focus is on safely cleaning and glossing a variety of surfaces. 

Pro Tip: Mix a couple ounces (1oz - 4oz) of CarPro Reload with your next RTU bottle of Ech2O for added protection!

Can I use Ech2o as a wipe down before coating?

No, the organic lubricants in Ech2o are GREAT for aiding in safe quick detailing but lubricants can hinder the bonding of CQuartz to the surface.  For that purpose, stick with Eraser for a wipe-down solution.  That is what Eraser was designed for.   

Can I use Ech2o for wiping down a car that I just coated?  

That depends on your definition of “Just”.  Ech2o has very effective cleaners in it so we do NOT want to introduce a cleaning solution to a ceramic coating that is STILL undergoing a very complex curing process. IF you mean just before or after delivery / wiping off dust then yes.  In that case dilute Ech2O 1:25 and gently remove any dust.

 How do I use it?

 As a high QD dilution – Spray and wipe. 

 For waterless - take a look some of the product videos.

 Why do you have a range of dilutions mentioned?

There are a lot of variables in detail.  Level of dust and dirt, temperature, humidity, preference, technique, and existing surface protection are just a few of the variables.  In general, we would recommend you start with 1:15 for waterless wash and 1:25 for Quick Detailer.

Can I use Ech2O on Chrome?

Yes,  It leaves the chrome incredibly clean, slick, and glossy!

Can I use Ech2O on Glass?

Yes, it works excellent!

Can I use Ech2O on interiors?

You can use Ech2O on some interior surfaces but we would recommend using CarPro Inside for most interior surfaces!

 How to mix: Dilution Chart

Dilution Chart   

5AA Ceramic Coating Bundle [6 Month Old Cars With medium Bonded Contaminants]

This is the finest ceramic coating Kits for cars. It includes everything you need to Wash, Decontaminate, Polish, Coat and add Slickness to your finish and protect it for years 

Transform and protect your pride & joy with this new paint protection bundle, offering breathtaking gloss, superior protection, and amazing water beading. Keeps your car cleaner for longer, easier to maintain and protect from the elements for years to come. 

 Give your vehicle the ultimate protection with this new Paint Protection Bundle. This bundle contains everything you need to completely wash & decontaminate your paintwork, and apply innovative glass coating protection to bring your vehicle to the next generation of car care.  

 Key Benefits:  

1. Cquartz UK 3.0 2019: Extremely deep gloss that lasts!, Easy maintenance with "self-cleaning" properties (Stays cleaner than other products on the market) 70% Quartz with 99.9% purity

2. Protection and gloss superior to that of competitor "professional coatings" but easy to use for all detailers and DIY's
3. 70% Quartz with 99.9% purity
4. An extremely deep gloss that lasts!
5. Easy maintenance with "self-cleaning" properties (Stays cleaner than other products on the market)
6. Resistance to wash induced marring, bird dropping damage, stains, high or low temperatures, and traffic film
7. Repels UV rays, water, oils, dirt, and contaminants
8. Optional: SCHOLL CONCEPTS S20 BLACK Polish. This is designed to do aggressive compounding and polishing to almost complete perfection.  Depending on the pad used, you can control how aggressive you go.
9. Easy to apply this DIY ceramic coating Kit

Kit Includes:

• 1 x Cquartz UK 3.0 30mL Kit (2019 V3.0) included in the Kit:
• 1x 30ml bottle of CQuartz UK Edition (15ml+/- per coat)
• 1 x 100ml bottle of CarPro Reload Silica Spray.
• 1x Applicator Block.
• 5 x 4" Microfiber Suede Applicators
• 1x 16" Microfiber Suede Towel

• 1x CarPro Reset 500 ml (Shampoo): Reset breaks down road grime and traffic films with the power of an alkaline cleaner, whilst being as gentle on the surface as a pH-neutral shampoo.
• 1x CarPro Eraser 500ml: Remove any leftover polishing oils with Eraser so the Ceramic Cquartz Coating can properly bond.
• 1x CarPro ImmoLube (Clay Lubricant) 500ml. A non-stick formula for ease of use. Reduces the chance of marring on automotive surfaces 
• 1x Concours CLAY 200g: Allow for the safe removal of all contaminants such as industrial fallout, oxidation from acid rain, or exhaust pollutants.
• 4 x MF Paint protection and removal cloth (2 Red 2 Yellow): Wipe off the residue from the CquartzUK with the Red or Yellow cloth.
• 2x MF (Green cloth) (multi-Use Cloth) Can be used for Polish or eraser to wipe down prior to coating. Green MF can be used with reload also.
• Optional Recommendation: 1 x SCHOLL CONCEPTS S20 BLACK 1-STEP COMPOUND Polish 500g

Directions:

1. Wash with Reset or any other shampoo ( Avoid any shampoo with gloss enhancers or Wax)
2. After you dry your car, spray Carpro Immolube onto the paint, and start using your clay bar and run across the surface, you may require to spray more Immolube as the surface starts to stick.
3. After the car has been successfully decontaminated using the Clay bar with Immolube.
4. Wash the car again with CarPro Reset to get rid of all impurities from the surface.
5. Perform hand or machine polishing (if needed) if the surface has any swirls or marks from the claying stage.
6. After the decontamination process is complete, and any polishing stages have been completed.
7. Wipe the car down with CarPro Eraser. (using Green Microfibre Towels)
8. Next step: Begin to apply CarPro CQUARTZ UK 3.0 (2018) onto the car through the use of the supplied suede applicators and block. Level the coating as per the instructions on the Cquartz UK product page. Also, use the Red/Yellow Microfibers to wipe off the coating, and get ready for a glossy, and protective layer.

Note: If you don't feel confident after reading our instructions on both this product page and the CQUARTZ UK page, it may be a good idea to do some of your own research on CQUARTZ UK, watching some videos on how it is applied, and reading some different accounts and descriptions to give you a great understanding on the process and what's involved. If you require any additional assistance in applying CQUARTZ, don't hesitate to email us and we will be able to help you out with the procedure.

You may also email us or call us.

We will be able to help you if you have any concerns about applying the coating, its not as hard as what some make it out to be.

CarPro Samples Kit 16pc  *New*

Must Try This Starter kit from the CarPro.

Find out why CarPro is one of the leading innovators in the car care industry, with their new quality car care products. 

CarPro has been innovating the Car Care Industry for years now. Their products are emblematic of their goals, which is to supply quality products that are constantly pushing the boundaries of modern car care. 

Find out why thousands of people are trusting CarPro with their investments, and take your car into the new age of car care today. 

Contains 16 x 50ml Samples of:

1. CarPro Bug-Out
2. CarPro Iron X
3. CarPro Tar X
4. CarPro Reload
5. CarPro Spotless
6. CarPro HydrO2 
7. CarPro ECH2O
8. CarPro MultiX
9. CarPro EliXir
10. CarPro FogFight
11. CarPro Eraser
12. CarPro Reset
13. CarPro Perl
14. CarPro Hydr02 LITE
15. CarPro Trix
16. CarPro Inside

CARPRO NAUTIK MARINE COATING 100ML KIT

CarPro presents revolutionary marine protection

NAUTIK nano-epoxy ceramic coating!

The evolution of boat protection came from the creators of CARPRO CQUARTZ, this incredible new protection method for all ships!

NAUTIK has been specially formulated to withstand the harsh conditions of seawater while providing protection against damage from the sun, algae, bamacles, discoloration and more!

In rivers and freshwater lakes, NOTHING resists algae better than NAUTIK. 

During the tests, Carpro found waste and algae to be eliminated with ZERO resistance.

NAUTIK has been designed to bind directly to gel-coat and fiberglass surfaces where it becomes a barrier between the surface and its environment.
Once installed, your boat becomes much easier to clean.

No need to constantly sand or polish the surface to clean it.

In the real world, algae, scum, and more were easily removed using a microfiber cloth.

Not only does its unique VOC-free formula protect the surface and make it much easier to maintain, it also strengthens and protects the shine of the finish for years to come.

Please allow 3 working days for pre-order before shipping.