3D Magic Blue Dressing for Tyres, Trim, Vinyl, Molding, Bumpers
- 3D Magic Blue Dressing was designed as a “catch-all” dressing to use on pretty much every solid surface of your vehicle.
- 3D Magic Blue Dressing can be used effectively on any trim, vinyl, molding, bumper, or tires on your vehicle.
- The high viscosity of 3D Magic Blue Dressing will ensure that it does not run down the surface while you are trying to apply it in the more minute and niche areas of your car.
- 3D Magic Blue Dressing is Solvent-based making it water resistant, so it will aid in preventing water spots from forming on your vehicle.
- The long-lasting glossy finish will have you truly believing just how Magical this product is!
- The more porous surfaces of your car tend to be the most difficult to protect.
- All of your plastic, vinyl, rubber trim, tires, etc. can’t be protected with your standard paint protection products.
- Because of the porosity of these surfaces, it is nearly impossible for most protection products to properly adhere to the surface. And even worse than that, most waxes and sealants will even dry to an unappealing crust on any porous surface! With all of this in mind, you usually must be quite picky when it comes to selecting how you are going to protect your trim, tires, etc. Well, that is unless you have a MAGIC up your sleeve!
- Only apply 3D Magic Blue Dressing to a surface that is cool to the touch and out of direct sunlight.
- Apply 3D Magic Blue Dressing to an applicator and spread it over the surface in a thin and even layer.
- Wipe off the excess product using a clean and dry microfiber towel.
- Allow 3D Magic Blue Dressing to dry completely to reduce the risk of slinging.