Bilt Hamber Touch-Less Snow Foam Pre Wash Touch Less 5L

Save $5.05
BILT HAMBERSKU: BHTouchless-5Lt

Size: 5L
Price:
Sale price$98.90 Regular price$103.95
Stock:
In stock

Description

BILT HAMBER TOUCH-LESS 5 LITER SNOW FOAM PRE WASH TOUCH LESS


Bilt Hamber Touch-Less 5 Liter Snow Foam Pre Wash Touch Less

Works great in our MTM PF22.2 Foam Cannon or  our IK Foam Pro foamers.

Bilt Hamber Laboratories premium car care products from THE UK

  • TOUCH-LESS is our new eco-friendly pressure-washer, pre-clean, snow foam which can be applied by pump spray, foam cannon or foam gun.
  • Applied at typically a 4% PIR this bio-degradable sugar-based product provides truly exceptional levels of cleaning of automotive paintwork.
  • Unlike other petrochemical-based cleaners, TOUCH-LESS is free-and-easy rinsing, easing the effort of subsequent bucket washes and massively helping post-treatments bond.
  • TOUCH-LESS also contains corrosion inhibitors. Packed in 5 litre PH:10-11, contains no phosphates, solvents, NTA, or caustic soda.

How To Use
TOUCH-LESS may be applied with trigger spray, pump spray, pressure washer, or snow foam lance. The minimum recommended dilution rate should be 2% PIR (Panel Impact Ratio) and up to 5% for very dirty vehicles. 

Step 1

Fill the detergent bottle or reservoir (on machine or lance) up to capacity with plain water. Turn detergent feed to full. Take a large bucket or container and discharge the lance into this, watching the detergent bottle until empty. Once empty, stop.

Step 2

The following calculations will achieve 4% dilution; Measure the total amount collected and multiply this number by 0.04 (Total can be measured in either volume with a measuring jug or by weight) this is the amount of TOUCH-LESS to use.

We recommend 50ml Touchless to 950ml of water in your foam cannon

Step 3

Add the calculated amount from STEP TWO to the pressure-washer reservoir and top up to full with cold water and shake in for a few moments.

Step 4

Apply touchless to the entire vehicle or panel by panel. Allow soaking for 1-5 minutes (but never allow to dry). Power-wash off.

It is not necessary to use all diluted touch-less in one wash. One litre of diluted product should last 4-5 washes.

Apply to cool panels in shaded conditions. Do not allow this product to dry in use. Keep the bottleneck and lid clean.

Note: Bilt Hamber Touchless produces less foam then Bilt Hamber Autofoam

Product Size: 5L

Safety Data Sheet: here 

 

Estimate shipping

Recently viewed