Gyeon Q2M Water Spot Remover 500mL
Remove water spots before they cause damage!
The biggest advantage of Q²M WaterSpot is its safety on paintwork. Due to inappropriate maintenance, water spots may become an issue on fresh coatings.
You can remove the most undesirable defects by using O²M WaterSpot without the need to polish and, in most cases, re-apply the quartz coat.
This thick, spray-on formula is designed to allow multiple passes with a microfiber towel so you can more effectively remove those water spots before they cause permanent damage.
GYEON WaterSpot requires very little effort to use, making it the perfect choice for your detailing.
Water spots are a fact of life. They can appear after virtually any water hits your vehicle and isn’t wiped off.
It could be the sprinkler system, unexpected rain shower, and there they are as plain as day.
A fresh SiO2 coating is especially susceptible to these water spots, and that’s why it’s important to keep some GYEON WaterSpot on hand!
GYEON WaterSpot acts fast, dissolving the minerals that cause water spots before they leave a permanent mark.
- Simply wash the vehicle using a pH-neutral shampoo, and spray the affected area with GYEON WaterSpot , wiping with a clean microfiber towel.
- While use of GYEON WaterSpot can affect the hydrophobic properties of the coating, so a coating of GYEON Boost or GYEON WetCoat may be in order.
- Avoid leaving GYEON WaterSpot on paint or glass for prolonged periods of time.
Work panel by panel. Never spray on a large area at once, as the product might dry. Use a soft microfibre and wipe the affected area multiple time. If necessary - repeat the process. TIP: Never leave a towel soaked with the product on the surface, especially glass.