Search

Search our shop

Sale

MTM Acqualine 316 Stainless Nozzle Guard BLUE 40°

16.7013

Size: Orifice Size 3.0 - 40°
In-stock: Inventory updated

Nozzle Size Calculator

Nozzle Size Calculator

MTM Acqualine Nozzle Guard BLUE

Upgrade your cleaning experience with our new AISI 316 Stainless Nozzle Guard!

This setup has a 100% tested threaded stainless MTM nozzle installed in a 316 surgical grade stainless nozzle guard.

A stainless 1/4" MTM QC plug is then installed with certified Italian Loctite.

These Italian nozzle guards offer a new level of safety with a premium feel when working around your vehicle commercial kitchen to keep paint safe from scratches.

These new nozzle guards engage with all commercial grade and MTM branded ¼” couplers for quick release between foaming and cleaning.

316 Stainless Steel is among the highest class of stainless and commonly considered food grade, nuclear grade, and marine grade.

With advanced corrosive properties, these Italian nozzle guards will be the last QC nozzle you purchase!

 Features and Benefits

  • 316 surgical grade stainless nozzle guard.
  • food grade, nuclear grade, and marine grade

The orifice size refers to the diameter of the opening in the nozzle that allows water to flow through. In general, a larger orifice size will result in a higher flow rate and greater water volume, while a smaller orifice size will result in a lower flow rate and less water volume.

 NOZZLE SIZE Chart

Overall rating: 5.0 / 5 from 27 reviews.

AI Generated Review Summary

Summary topics

    Review topics: [].

    Review highlights

      Reviews

      Great tool, makes rinsing a pleasure

      "new to detailing and spray guns/lances. Makes rinsing post foam or wash a really simple task. Soft spray is easy on duco/paint."

      Andrew S. (5/5)

      Great Nozzle

      "This is a great quick connect nozzle, love the rubber tip making it safe just in case an accident happens. The spray pattern is great and allows for more efficient cleaning"

      Emilio D. (5/5)

      Mtm pressure washer nozzle

      "This thing's awesome! It's not just pretty; it's way better than a regular nozzle. I can't find a single flaw. Plus, the Detailing Shed crew are amazing – their service, explanations, and help picking stuff are top-notch. I'm totally getting the 25-degree one next."

      Christopher S. (5/5)

      "Easy to connect to pressure washer gun Strong material will last a long time Produces a great even pressure"

      Jet (5/5)

      MTM Aqualine Nozzle

      "Excellent Nozzle and guard . Precise 40 deg jet angle . The plastic guard not too soft and not too hard ."

      Sina N. (5/5)

      Definitely a step up from

      "Definitely a step up from the cheaper nozzles. Great value for money when they're on special. Great at rinsing, but still has the power up close to remove stubborn dirt."

      Kris Z. (5/5)

      protect the paint

      "stainless steel is the best to use but it's the soft guard that's good and protecting the paint is the goal."

      wayne c. (5/5)

      Awesome Nozzle

      "I have been using this nozzle for the last 4 years with my Kranzle Pressure Washer to wash and detail"

      Ish R. (5/5)

      Correct Nozzle

      "For cars treated with film or ceramic paint protection, this nozzle is ideal. Also from a safety angle it would minimise any damage to the car if the nozzle detaches and hits the car body."

      Shane D. (5/5)

      Very happy with this item

      "Very happy with this item makes everything easy and preforms well ."

      Scott J. (5/5)

      Q&A

      Hi, I have a Big Boi Short Trigger Gun with a brass 1/4" QC but the nozzle does not fit, do MTM nozzles only fit MTM guns or would this most likely be an issue with the Big Boi gun?
      All 1/4 nozzles are the same in size. So they will fit a gun with 1/4 inch fittings. You may have a faulty fitting. Only have to choose the correct orifice size for the gun. Check our chart on detailingshed.com.au website.
      Hi guys I just have a question regarding these nozzles, what is the difference in the oriffice sizes between 2.5-4.0? What is more a standard size if so?
      Hi Stephen The orifice size refers to the diameter of the opening in the nozzle that allows water to flow through. In general, a larger orifice size will result in a higher flow rate and greater water volume, while a smaller orifice size will result in a lower flow rate and less water volume. To work out the size you require, please see chart located in the description of the MTM Acqualine 316 Stainless Nozzle Guard BLUE 40° https://detailingshed.com.au/products/mtm-acqualine-nozzle-guard-blue
      Is the nozzle part removable?
      Hi Luke, There are 3 parts that are removable if needed. I would not recommend it as they are loctite together. 1x 1/4 QC plug 1x Orifice 1x nozzle guard Hope I have answered your question