The Coxreels 112-3-100 is a compact, all steel hand crank hose reel rated to 4,000 PSI, built to take 30 m of 3/8 inch high pressure hose. This is the configured version: black, and fitted with a stainless steel swivel in place of the standard brass. Made in the USA, supplied less hose.

Made in the USA 4,000 PSI Stainless swivel Hand crank 30 m capacity 1 year warranty

ModelCoxreels 112-3-100, 100 Series

ConfigurationBlack, stainless steel swivel, direct hand crank

Hose size3/8 inch internal diameter, 5/8 inch outside diameter

Capacity30 m (100 ft) of 3/8 inch hose

Max pressure4,000 PSI

Connections3/8 inch NPT female, inlet and outlet

FrameOne piece heavy gauge steel, U shape

BrakeAdjustable tension, stops free wheeling

Dimensions464 x 330 x 305 mm (18.25 x 13 x 12 in)

Weight8.6 kg (19 lb), shipping

SuppliedReel only, less hose

This version has a stainless steel swivel. The standard Coxreels 100 Series ships with a machined brass swivel. This build replaces it with stainless. If you have an older brass swivel reel and are ordering seals or spares, the parts are not the same. Check with us before ordering a seal kit.

Why the stainless swivel matters

The swivel is the one part of a hose reel that does real work every single day. It is a pressurised rotating joint, it sits where water collects, and it is what fails first on a reel that lives in a wash bay.

Brass handles pressure fine and Coxreels have used it for decades. Where it struggles is corrosion in a wet, chemical environment. Detailing is exactly that environment: snow foam, wheel cleaner, salt off customer cars, and a bay that never properly dries out. Brass goes green, the surface pits, and a pitted sealing face chews through seals faster.

Stainless does not. It holds a clean sealing surface for longer, which means fewer seal changes and a swivel that still turns smoothly after years in a wet bay. On a reel you are buying once and bolting to a wall, that is where the money goes.

Plan the position before you drill

A hand crank reel is a once only install. Four bolts into a wall, plumbing run to the inlet, and then it stays where you put it. The two things people get wrong are both about clearance.

Measure for

The crank arc, not just the 464 mm body width
Clear air for a full turn of the handle
Room to pull hose off without fouling a bench or machine
Access to the swivel for seal changes in place
A height you can reach the crank from

Common mistakes

Mounting tight to a corner so the handle hits the wall
Fixing to cladding or plasterboard instead of structure
Facing the reel so the hose pays out the wrong way
Boxing the swivel in behind hard plumbing
Mounting so low the wound hose sits on the floor

If you are putting the reel in a tight spot, tell us the wall and the clearance you have before you order and we will confirm it will work there.

Build and construction

One piece U shaped steel frame. Heavy gauge, solid, no bolted joints to work loose. The whole point of the 100 Series is that it is compact and still genuinely rigid under load.

CNC spun ribbed discs with rolled edges. Robotically spun rather than pressed. The ribs add stiffness, the rolled edges mean no sharp lip to cut a hose or a hand.

90 degree full flow NPT swivel. Full flow means the swivel is not the restriction in your line. The design allows seal maintenance and hose changes without taking the reel off the wall.

Adjustable tension brake. Set the drag so the drum pays out at the speed you want and stops dead when you stop pulling. No free wheeling, no hose dumped on the floor, no overrun in transport.

CPC powder coat in black. Chip resistant and rust inhibiting, which matters on a steel reel in a wash bay.

Direct hand crank. Mechanical rewind, no spring to break and no motor to fail. Simple, and simple is what still works in ten years.

Hose it will take

The drum holds 30 m of 3/8 inch high pressure hose. It also takes shorter runs, so 15 m and 23 m lengths wind on with room to spare.

Both the inlet and the outlet are 3/8 inch NPT female, so a standard high pressure hose with 3/8 inch NPT male ends connects directly.

Supplied less hose. The reel is sold on its own. Choose the hose length to suit the bay and we will supply it with the right ends fitted.

Specifications

Brand	Coxreels
Series	100 Series, compact hand crank
Model	112-3-100
Rewind	Direct hand crank, manual
Colour	Black
Swivel	Stainless steel, 90 degree full flow NPT
Hose internal diameter	3/8 inch
Hose outside diameter	5/8 inch
Hose capacity	30 m (100 ft)
Maximum pressure	4,000 PSI
Inlet	3/8 inch NPT female
Outlet	3/8 inch NPT female
Frame	One piece heavy gauge steel, U shaped
Discs	CNC spun, ribbed, rolled edges
Brake	Adjustable tension
Finish	CPC powder coat, chip resistant and rust inhibiting
Overall dimensions	464 x 330 x 305 mm (18.25 W x 13 H x 12 L in)
Mounting centres	140 x 76 mm (5.5 x 3 in)
Base footprint	241 x 152 mm (9.5 x 6 in)
Shipping weight	8.6 kg (19 lb)
Supplied	Reel only, less hose
Warranty	1 year limited warranty
Origin	Made in the USA

Mounting it

Fix to structure	Stud, beam or solid masonry. A loaded reel with 30 m of hose on it plus the pull of a trigger gun puts real force through four bolts.Mounting centres are 140 x 76 mm.
Allow for the crank	Measure the crank arc, not just the 464 mm body width. The handle needs clear air to turn through a full circle.
Height	High enough that the hose does not sit on the floor when it is fully wound, low enough to reach the crank without a step.
Feed direction	Work out which way the hose pays out before you drill. A reel mounted facing the wrong way makes every pull a fight.
Keep the swivel accessible	The swivel is designed for seal changes in place. Do not box it in behind a bracket or hard plumbing.
Set the brake	Adjust the tension once the hose is on. Enough drag that it holds, little enough that it pays out with one hand.

Common questions

Does it come with hose?

No. All 100 Series reels are supplied less hose. The drum takes up to 30 m of 3/8 inch high pressure hose, and shorter runs at 15 m or 23 m fit with room to spare. Tell us the length you want and we will supply it with the correct ends.

What is different about this one?

The swivel. A standard 112-3-100 ships with a machined brass swivel and this build has a stainless steel one, which holds up far better in a wet, chemical environment. The finish is black. Everything else is the standard 100 Series build.

Why stainless rather than brass?

Corrosion. A detailing bay is permanently wet and full of chemical, which is where brass pits and goes green. A pitted sealing face eats seals. Stainless keeps a clean sealing surface, so the swivel turns smoothly for longer and you change seals less often.

Will my brass swivel seal kit fit it?

Do not assume so. The stainless swivel is a different part to the standard brass one. Contact us with your reel details before ordering seals and we will confirm the correct kit.

Can I fit this to a Kranzle or another pressure washer?

Yes, provided the machine's working pressure is within 4,000 PSI, which covers every machine we sell. The connections are 3/8 inch NPT female at both ends, so you need the right adaptors or hose ends for your machine. Tell us what you are running and we will sort the fittings.

Is 4,000 PSI the operating pressure?

It is the maximum working pressure the reel is rated for, not what it runs at. Your machine sets the operating pressure. The headroom is there so the reel is never the weak point in the line.

Hand crank or spring rewind?

Hand crank, deliberately. There is no spring to weaken or break and no motor to fail. On high pressure hose, a spring reel also has to be strong enough to drag a stiff, heavy hose back, which is where spring reels struggle. Cranking takes a few seconds and the reel lasts.

Can I mount it on the ceiling?

The 100 Series is designed for wall, bench or floor mounting through its base. For overhead work, talk to us about the right reel and bracket rather than improvising a mount on this one.

What does the warranty cover?

One year limited warranty against defects in materials and workmanship. This is in addition to your rights under Australian Consumer Law, which are not limited by it. Coxreels build in the USA and support the product worldwide.

What goes with it

Pressure washers the machine that feeds it. Any of ours sits well inside the reel's 4,000 PSI rating.

Coxreels 100 Series swivel seal kit the service part for the swivel. Confirm with us which kit suits a stainless swivel.

Coxreels bearing and brake, EPDM the tension brake service part for 112, 117 and SM series.

Dimensions, pressure rating, hose capacity and construction details are the Coxreels published specifications for the 112-3-100. Colour and swivel material describe this configured build. Metric conversions are rounded. The reel is supplied less hose. Confirm fitting sizes and seal kit compatibility with us before ordering spares.

Tell us the machine you are running and the hose length you want and we will supply the reel with the correct fittings.

Ask us Pressure washers

Shipping

General Information:

All orders are dispatched on the same day if placed by 12pm noon from Monday to Friday.
During peak and sale periods there may be slight delays in dispatching.
Delivery and tracking details will be provided in your confirmation email. We will update your order with tracking information, so you have up-to-date information on your parcel.

Delivery Options:

Express Shipping: 1-3 Business Days
Standard Shipping: 2-5 Business Days

Please allow extra time for delivery to regional and remote areas.

Click and Collect:

Place your order online and select the 'pick up' option at checkout.
It takes approximately 1-3 hours for your order to be ready for pickup. You will receive an email confirmation once your order is ready.
Address: 6D, 1-3 Endeavor Road, Caringbah, NSW, 2229. (This address is for click and collect orders only.)

Free Delivery:

Free Shipping on orders over $150 excluding remote areas and certain weight restrictions apply for free shipping in each state. Trade accounts $250 minimum for free shipping.

The following qualifies for free shipping:

NSW & ACT metro: Total weight of the order is below 21kg (excluding regional, country areas and bulky items)
NSW & ACT outer and regional below 10kg
VIC, QLD, SA: Total weight of the order is below 10kg
QLD, VIC, SA, outer & regional: Total weight of the order is below 5kg
WA metro: Total weight of the order is below 5kg
WA outer & regional - excluded from free shipping
TAS Total weight of the order below 5kg
NT - excluded from free shipping
NZ - excluded from free shipping

For orders with free shipping, we determine whether to use a courier service or Australia Post based on the address. If you prefer your order to be shipped via Australia Post, please select the "Parcel Post" option at checkout.

Note: We do not ship to PO Boxes or Parcel Lockers with free shipping.

Reshipping Fees

If your parcel is returned to us, the following conditions outline when additional shipping costs may apply:

Incorrect Address: When an order is sent back because the address provided was incomplete or incorrect, the customer will be responsible for paying the postage fee to have it sent again.
Uncollected Parcels: If Australia Post attempts delivery of the parcel it will be taken to the Post office to collect for 2-3 weeks, if it is returned due to not being collected in time, a return to sender fee of $13 will be charged, and a new shipping fee will be required if you would like us to resend it. If you choose not to resend it, we can only offer a store credit.
Damaged in Transit: If your order comes back to us because it was damaged during delivery, we will resend it at no extra cost to you.
Other Shipping Problems: If the return is caused by a delivery issue outside the control of both the customer and our business, we will cover the cost of sending the order again.

*We will not be held responsible for delays or late delivery of Australia Post or courier services.

*If a parcel does not arrive as anticipated, please allow 5-7 working days for Australia Post or couriers to complete process of tracking and locating as in most cases it turns up after 3-7 days of expected delivery. We cannot refund or send another item until this process is completed.

*We don't take responsibility for orders that are lost or stolen once the parcel has been delivered to the correct delivery address.

*Items that are over 21kg may require to pay extra freight costs if in regional or remote areas - we will contact you if this is the case.

All of our prices are in Australian dollars (AUD) and include GST (Goods and services tax)

Returns Policy

Returns & Refund Policy

Name: Coxreels 112-3-100 Hose Reel 30m With Stainless Swivel
Brand: Coxreels - USA
SKU: 112-3-100-KAXX
Price: 849.0 AUD
Availability: InStock
Rating: 5.0 (1 reviews)

Your Rights Under Australian Consumer Law

Nothing in this policy limits or replaces your rights under Australian Consumer Law.

If a product has a major or minor failure, you may be entitled to a remedy under Australian Consumer Law. The terms below primarily apply to change-of-mind purchases and circumstances not covered by consumer guarantees.

Change of Mind Returns

We may accept approved change-of-mind returns subject to the following conditions:

Return requests must be made within 30 days of delivery.
Products must be unopened, unused and in original condition.
Returns must be approved before being sent back.
Store credit will be issued once the item has been received and inspected.
A 10% restocking fee applies.
Return shipping is the customer's responsibility.
Original shipping charges are non-refundable.

To request a return, email info@detailingshed.com.au with:

Your order number
The product you wish to return
Photos of the item

Products That Cannot Be Returned

Due to safety, hygiene, freight and manufacturer restrictions, the following products are not eligible for change-of-mind returns:

Chemicals and liquid products
Ceramic coatings
Apparel
Pressure washer fittings
Polishers, buffers and polishing machines
All Kranzle products
All BigBoi products
All Chicago Pneumatic compressors
All Mytee machines and extractors
All Numatic machines and vacuums

These products cannot be returned for change of mind unless required under Australian Consumer Law.

Products That May Be Eligible

With prior approval, we may accept returns on unused and unopened items such as:

Brushes
Towels
Pads
Accessories

Please contact us before sending anything back.

Product Not Working as Expected?

If you believe a product isn't performing correctly, please contact us before returning it.

To help us assess the issue, please provide:

Your order number
A description of the problem
Photos or videos where possible

In some cases, we may ask you to return the product for inspection.

If a Fault Is Confirmed

We will assess the issue and provide an appropriate remedy in accordance with Australian Consumer Law.
Approved return shipping costs will be covered or reimbursed where applicable.
No restocking fees apply.

If No Fault Is Found

If testing shows the product is operating as intended, the matter may be treated as a change-of-mind return and the standard conditions above may apply.

Products excluded from change-of-mind returns remain ineligible for return where no fault is found.

New Zealand Orders

For orders shipped to New Zealand, customers are responsible for return shipping costs when sending back:

Pressure washers
Polishers
Buffers

This applies to inspections, repairs and warranty-related claims.

Due to the high cost of international freight, we are unable to cover these return shipping costs.

Exchanges

If you've ordered the wrong item, you're welcome to return eligible products under this policy and place a new order for the correct item.

If you're unsure which product is right for you, our team is happy to help.

Order Cancellations

Orders can be cancelled before they have been processed or dispatched.

Approved cancellations will be refunded to the original payment method less a 3% payment processing fee.

Once an order has been processed or shipped, it can no longer be cancelled. However, eligible items may still be returned under our Change of Mind Returns policy.

Damaged, Incorrect or Faulty Items

If your order arrives damaged, incorrect or faulty, please contact us within 10 days of delivery.

Email info@detailingshed.com.au and include:

Your order number
Clear photos of the issue
A brief description

We'll work with you to assess the issue and determine an appropriate resolution.

Lost or Missing Deliveries

If your parcel appears to be missing, we'll work with the carrier to investigate.

Please allow 7-15 business days for the investigation to be completed before a resolution can be finalised.

Product Images & Packaging

Manufacturers occasionally update packaging, labels and colours without notice.

As a result, the product you receive may vary slightly from the images shown on our website. This alone does not constitute a fault provided the correct product has been supplied.

Discount Codes

Discount codes must be applied during checkout.

Unfortunately, discounts cannot be applied retrospectively and we cannot refund the difference after an order has been placed.

If you're experiencing issues with a discount code, please contact us before completing your purchase.

Need Help?

We're always happy to help.

Email: info@detailingshed.com.au

When contacting us, please include:

Your order number
Product name
Photos or video where relevant

Our team will do their best to resolve your enquiry quickly and fairly.

Got Questions?

Country

Search our shop

Coxreels 112-3-100 Hose Reel 30m With Stainless Swivel