Search

Search our shop

Optimum Gloss-Coat New Formula DIY 2yrs Durability

OPT-22912

Size: 20cc
In-stock: Inventory updated

Optimum Gloss-Coat New Formula DIY 2yrs Durability

*NEW FORMULA*   Optimum Gloss-Coat™ has added Ceramic polymers and is the most advanced polymer system that forms a layer of clear coat over automotive finishes. The new Optimum Gloss-Coat™ provides better scratch and mar resistance, better UV resistance, better chemical etch resistance, and has better release properties than any other consumer Ceramic product while providing unsurpassed gloss and slickness. Additionally, you can top the new Optimum Gloss-Coat™ with any non-abrasive wax or sealant of your choice to add additional gloss and slickness.

Optimum Gloss-Coat™ can be used to protect the following surfaces:

• Painted surfaces
• Wheels
• Plastic trim
• Bumpers
• Aluminium & chrome surfaces

Since Optimum Gloss-Coat™ bonds to surfaces it is applied to, any paint imperfections must be removed with Optimum Hyper Polish before application. Also, all waxes and oils must be removed from the surfaces for proper bonding.

Not recommended for glass

We also include an applicator for the levelling process

Directions:

  • Polish paint with Optimum Polish II or Optimum Hyper Polish to remove any defects
  • Clean surface with 15% IPA solution to remove all polishing oils, waxes, and silicones
  • Prime the applicator by making an X pattern across the pad, only a few drops will be needed for each subsequent panel.
  • Wipe Optimum Gloss-Coat onto a single panel at a time in a thin layer using two directions, in a circular or front to back direction
  • Within 5 minutes, inspect the panel with adequate lighting looking for any thick areas that have not flashed away to clear
  • Use foam applicator or paint safe microfiber to even out any areas where you see streaks; this step is key, as any spots not levelled will have to be polished if allowed to cure. Panels will feel a bit tacky and will be self-levelling during cure time, so avoid any unnecessary touching, wiping, or contact to produce the best results.
  • Repeat the above steps for each panel where the application is desired