Search

Search our shop

FEYNLAB® Plastic Black Ultra (durability 1 yr)

Size: 1 Bottle (30ml)
In-stock: Inventory updated

FEYNLAB® Plastic Black Ultra

Introducing Feynlab Plastic Black Ultra – The ultimate black trim restoration solution. Elevate your automotive detailing game with Feynlab Plastic Black Ultra, a revolutionary ceramic-based trim restorer meticulously crafted for black trim restoration. This is a one-of a kind solution that goes beyond traditional approaches, with advanced molecular technology to address plastic degradation at its core.

Durability & Application Surfaces

Durability – 1 yr.

Application includes 1 component layer.

APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces

  • Black textured plastics
  • Black plastic bumpers

Shelf Life:
Unopened  – 1 year.  Opened – Use within 3-4 months of opening. ALWAYS keep cap on bottle when not in use.

Included:
30ml (1oz) FEYNLAB® PLASTIC BLACK ULTRA

Cautions:
Always wear respirator & gloves during application. Ensure application area is free of loose contamination.
– DO NOT USE ON GREY TRIM. The Pigmentation within Plastic Black ULTRA will permanently stain non black colored trim

Surface Preparation:
Thoroughly clean vehicle using FEYNLAB® PURE WASH vehicle to remove all topical contamination.

Directions:
Prior to application place vehicle in a well lit, temperature controlled 10°C-30°C (50°F-85°F), & contamination free environment.

Shake PLASTIC BLACK ULTRA vigorously for 1 min before use.

Application Instructions:

  • Thoroughly shake the bottle before use.
  • Using the microfiber applicator, apply a small amount of PLASTIC BLACK ULTRA and work into the surface. The amount of product should be enough to evenly coat the area without over saturation.
  • Allow plastic to dwell and seep in for 5-10 min or apply as much as needed in a 5-10 minute window.
  • After 5 min, go back to application starting point, evening out surface and removing excess product.

Multiple Coats for EXTREMELY Faded Trim: Allow application to cure for at least 12hrs (overnight) between additional coats.

Note: The amount of PLASTIC BLACK ULTRA required will vary based upon the overall type of plastic and the starting condition. More oxidized faded plastics may require more product or multiple applications.

Final Inspection:
Be sure to carefully inspect all finished panels for any leftover coating residue (high spots) during the final wipe. Commonly edges, emblems, and other tight areas may contain some remaining residue. High spots are much easier to remove if caught within a 20-40 min window after the final wipe, than later when the coating has set and curing has started.