Search

Search our shop

MTM Hydro Foam Cannon Accessories

23.0004

Options: PF22 Weighted Filter - 23.0004
In-stock: Inventory updated

MTM Hydro Foam Cannon Accessories

We have a complete selection of Foam Cannon Accessories to maintain your foam cannon.

Optional:

PF22 Weighted Filter

SKU: 23.0004

Stainless Steel Filter: A weighted stainless steel chemical filter helps prevent any debris from entering the foamer valve body and ensures that the tube remains at the bottom of the bottle.

MTM PROFESSIONAL FOAMER SUCTION TUBE 9

SKU: MTM-41.0338

MTM Hydro's Replacement suction tube will fit any MTM Hydro Foam Cannon. This tube is 1/4" X 9" in length and is meant to be attached to the hose barb of an MTM Hydro Foam Cannon before installing the bottle.

Used in:

  • PF22
  • PF22.2
  • Original Foam Cannon

MTM Hydro Stainless Steel Foam Cannon Filter

SKU: 36.0226

MTM Hydro's Stainless Steel Foam Cannon Filter is a replaceable maintenance item that fits all MTM Foam Cannons. This product is a woven Italian Stainless mesh that operates as an agitator when the chemical and pressurized stream hits it. To the naked eye, it looks similar to any other cannon filter, but once it is disassembled, there is a distinct woven pattern throughout the filter that was developed by our Italian engineers to ensure a thicker, clinging foam.

From the models we have tested, this Filter will fit in competing foam cannons in addition to MTM Hydro's. Don't expect the same results though, the MTM Hydro Stainless orifice and sequential conical chambers of our Cannons have equal importance to the foam output.

As an agitator, this item will get clogged over time and if you use waxes, the sticky compounds are notorious for causing a faster failure rate. If you suspect a clog, and you remove the agitator, there will be no noticeable issue as the sticky chemical compounds are driven deep into the middle which creates additional back-pressure and inhibits foam creation. 

MTM Hydro PF22 Foam Cannon Repair Kit

SKU: MTM-41.5001

MTM Hydro's PF22 Foam Cannon Repair kit is a replaceable maintenance item that will only fit the PF22 Foam Cannon. This kit comes with both, O-rings, Fastener Pin, and a filter for replacement. The Filter is a woven Italian Stainless mesh that operates as an agitator when the chemical and pressurized stream hits it. To the naked eye, it looks similar to any other cannon filter, but once it is disassembled, there is a distinct woven pattern throughout the filter that was developed by our Italian engineers to ensure a thicker, clinging foam.

From the models we have tested, this Filter will fit in competing foam cannons in addition to MTM Hydro's. Don't expect the same results though, the MTM Hydro Stainless orifice and sequential conical chambers of our Cannons have equal importance to the foam output.

As an agitator, this item will get clogged over time and if you use waxes, the sticky compounds are notorious for causing a faster failure rate. If you suspect a clog, and you remove the agitator, there will be no noticeable issue as the sticky chemical compounds are driven deep into the middle which creates additional back-pressure and inhibits foam creation.

See image for verification of items included in this kit.

Video on the Detailed Look at the MTM PF-22 Professional Foam Lance.

 

YouTube Video Thumbnail

 

 

YouTube Video Thumbnail

 

Overall rating: 5.0 / 5 from 5 reviews.

AI Generated Review Summary

Summary topics

    Review topics: [].

    Review highlights

      Reviews

      Great addition to any foam cannon

      "Does the job! I bought 3. Two for my current mtm pf22. 2 foam cannons and another for my 3rd non mtm foam cannon. The weighted filter ball fit fine at the bottom of the tubes & just required me to heat the end of the tube with a hair dryer so I could force the weighted ball firmly into the ends of the tubes. Does the job in the foam cannons. I did need to trim the length of the foam cannons tubing on all 3 foam cannons or else it was too long with the weighted ball added. :)"

      Antony V. (5/5)

      Foam Cannon Bits

      "This is exactly what i needed to up my foam cannon game. Communication was awesome all the way from hitting the buy button to when the item landed on my door step."

      McCabe H. (5/5)

      Items work well

      "I purchased the weighted ball to install at the end of the suction tube. It works well. Just note that you will need to trim/cut the suction tube a little in order to allow the ball to sit at the correct depth in the bottle. Also note that it does take quite a bit of force to insert the weighted ball into one end of the suction tube."

      Naveed A. (5/5)

      Excellent.

      "Weighted intake was just what I needed. Works perfectly."

      Hamish M. (5/5)

      Best add on for mtm cannon

      "The cannon should come with one of these but it’s a great add on and inexpensive. Allows you to use all your solution and not have to worry about the angle when it’s running low."

      Matthew M. (5/5)

      Q&A