Gtechniq HALOv2 Flexible Film Coating (For PPF and Vinyl Wraps)

HALO enhances the performance of Paint Protection Film (PPF) and vinyl. It’s a chemically bonding, ultra-dense flexible film that becomes the permanent surface of the film – protecting it from the elements a car faces on a daily basis.

The density of the coating and its low surface energy improve dirt and water repellency of PPF or vinyl. It also helps to prevent staining from dirt ingression, as well as reducing yellowing caused by UV rays.

A key component of the HALOv2 is that it now only requires one layer of product to be applied, rather than the previous version which required two layers, saving time, effort and making maintenance a breeze.

Overall, HALO keeps the PPF looking in better condition and makes it much easier for people to keep their car clean following PPF/ vinyl application.

Rigorous real-world and laboratory testing has proven HALO to be compatible with all types of gloss, matte, and satin vinyl and PPF. It is also proven to work on self-healing films.

Features & Benefits:

• Makes PPF and Vinyl wrap surfaces easier to maintain
• Durability 2-years
• Can be used on gloss, satin and matte finishes
• Safe on self-healing films
• Helps prevent staining
• Protects against UV

Included in Kit:

• 30ml or 50ml HALO Flexible Film Coating
• A pair of nitrile gloves
• AP2 Ultra Soft foam-filled applicator
• Master instruction leaflet
• Gtechniq window sticker

PLEASE BE AWARE THAT WE WILL NOT BE RESPONSIBLE FOR ANY LOSS OR DAMAGE SUFFERED BY YOU AS A RESULT OF INCORRECT APPLICATION OF THIS PRODUCT

Play

Play

Instructions:

• Shake bottle well and wear gloves
• To apply HALO, your vehicle must be indoors and remain indoors, for at least 12 hours after the coating has been applied. For best results, good lighting is essential
• If applying to previously installed film, wash and decontaminate the vehicle with Gtechniq W5 Citrus All Purpose Cleaner and W6 Iron and General Fallout Remover
• Spray a 30% dilution of isopropyl alcohol (IPA) on to a Gtechniq MF1 ZeroR Microfibre Buff Cloth
• With your surface fully cooled, buff to remove any fingerprints or other surface contaminants. This process ensures you get the maximum number of chemical bonds between HALO and the film or vinyl
• Apply HALO evenly on the application pad and set the bottle aside
• Apply with applicator provided in overlapping strokes to an area roughly 2’x2’, or work to the bodylines of the vehicle
• After coating a panel remove residue with an MF1 cloth. Always remove from further than you have applied, working from the outside in
• Once applied carry out a final check with an MF1 cloth and a bright but diffused light source – this will ensure no residue remains on the surface. Allow the coating to cure for at least one hour and repeat the application process so that all film and vinyl is coated with two layers of HALO

Storage Instructions:

• Unopened, HALO has a 12 month shelf life from the time of purchase
• Store in a cool / dry place, out of direct sunlight
• Use within 3 months of opening