FREE Shipping on orders over $150 (Weight Restrictions Apply) Learn More
MTM Hydro's Italian Manufactured PF22.2 Foam Cannon is the standard in the foaming industry and stands alone as the most reliable foam cannon in the industry. With its new wide mouth and quick disconnect bottle, you can fill your bottle wish ease. Whether you are foaming down your car on the weekend or are a professional contract cleaner foaming a hog barn for hours, this tool will save you time and money. Simply attach the foam cannon to your pressure washer using one of the included fittings, fill with your desired ratio of chemical in the calibrated standing bottle and you are up and running.
THIS MODEL HAS A STAINLESS STEEL PLUG INSTALLED AT THE INLET OF THE FOAMER BODY
Check out this new video for assembly instructions: https://youtube.com/shorts/_jil9KRZrYY
The PF22 offers both, adjustable fan blades, and a two stage nozzle allowing you to spray vertically and horizontally. By adjusting the fan blades (narrow or jet) MTM Hydro Foam cannons throw thick foam onto your vehicle, pole barn siding, house, fence, sidewalk, roof or other washable items. The chemical injection knob on top of the PF22 also clicks and allows for precise measurement of chemical to be drawn through the internal chamber, increasing or decreasing the foam output. This allows the internal agitator to create a dense foam that is stickier than most competitors models. In doing so, this thick foam has a longer dwell time which allows the chemical to work on the cleaning surface for longer in its effort to emulsify the dirt and grime. some surfaces may still require some elbow grease, however, if the chemical does its job, very little (if any) scrubbing is required.
**Ships best in multiples of 12 (cases)
NOTE A specific 1/4" Male plug may be required in order to attach the QC plug to the end of some residential pressure washer setups. MTM Hydro 1/4" plugs are standard for industrial use but many residential pressure washers such as Generac, Greenworks, Ryobi, AR Blue Clean,etc... have certain models where the coupler will not receive an MTM plug. Not all of these brands are impacted, just certain models. If you look closely, the Chamfer at the end of an MTM plug as well as the neck is, 1.5mm shorter than some couplers may allow. We now offer this new Low Profile QC plug under item #24.5006. Once you install the correct plug in your new MTM Foam Cannon, you will see that it was worth finding this specialized fitting as our foam cannons are second to none, even when manufactures try to change their fittings!
Contents of the PF22 Foam Cannon Kit:
Specs:
Note: The full spectrum of ratings are not supported by the 3.5 or 3.0 orifices included with this kit. Other orifices may be required for higher flow machines that have lower PSI- Example: 2000 PSI with 3.5 GPM requires a 5.0 Orifice. For larger orifices, you will know it does not work because you will experience starting and stopping of the foam cannon as your unloader slips in and out of bypass. You will also get watery foam as the orifice size 3.5 is significantly smaller than the 5.0 needed for your machine. MTM Foam Cannons will not work with flow sensing unloaders as you will experience the same results listed for an under-sized orifice. See below for additional orifice sizes and replacement items available for purchase.
Please allow extra time for delivery to regional and remote areas.
Free Shipping on orders over $150 excluding remote areas and certain weight restrictions apply for free shipping in each state.
The following qualifies for free shipping:
Note: We do not ship to PO Boxes or Parcel Lockers with free shipping.
*We will not be held responsible for delays or late delivery of Australia Post or courier services.
*If a parcel does not arrive as anticipated, please allow 5-7 working days for Australia Post or couriers to complete process of tracking and locating as in most cases it turns up after 3-7 days of expected delivery. We cannot refund or send another item until this process is completed.
*We don't take responsibility for orders that are lost or stolen once the parcel has been delivered to the correct delivery address.
*Items that are over 21kg may require to pay extra freight costs if in regional or remote areas - we will contact you if this is the case.
All of our prices are in Australian dollars (AUD) and include GST(Goods and services tax)
A few important things to keep in mind when returning a product you purchased online from our website:
Non-returnable items:
How do I submit a return request?
To set up a return, please email info@detailingshed.com.au first for approval. You must provide your order number and the items you want to return. After you have contacted us and we review your return request, we will assign you an authorisation number.
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund and deduct any restocking fees. If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 3 days.
If you are shipping an item over $50, we recommend using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned items if you have not followed this process.
Late or missing items (if applicable)
If an item has not been delivered yet, please allow 7-15 working days after Australia Post or courier has started process of tracking and locating parcel before we can refund or send out another item. We will notify you by email once you have been refunded.
Packaging and Colour Discrepancies
Product packaging received may differ from the images displayed online and could be updated or have variations. Slight differences in colour may exist between the images advertised online and the physical product. In some instances, manufacturers may change the original colour of the product. We maintain the discretion to decline refund requests arising from variations in colour of the product and packaging.
We're here to help
If you need to contact us for advice on any of the products, please email us at info@detailingshed.com.au
Please include description of the product you are interested. Some info of you car, and also what you are trying to achieve.
We may also review our blogs for product recommendations.
