Labocosmetica 2pH Maintenance Wash System
- PRIMUS - ALKALINE PH will remove all residues of organic origin, such as road dirt, oil, bugs & organic residues
- PURIFICA - ACID PH will remove all residues of inorganic origin, such as limescale, water marks & acid rain residues. will remover static dirt during the mechanical action
This Bundle Includes:
- 1x Labocosmetica PRIMUS 2.0 Alkaline pH Snow Foam Pre-Wash ph11 - 1L
- 1x Labocosmetica PURIFICA Acid pH Snow Foam Pre-Wash - 1L
The innovative 2pH combined system by Labocosmetica was designed to assist detailers and car enthusiast owners in a pivotal stage of car care - the washing process. This system proves invaluable whether the vehicle is already protected or not, making it an indispensable tool for achieving optimal results in automotive maintenance.
When washing a car, thorough cleaning is essential. However, in order to remove the dirt and contaminants that have built up on the bodywork, it is often necessary to use a product with a specific pH.
By using the 3pH combined car wash cycle of Labocosmetica we will obtain the following advantages:
- An Alkaline pH will remove all residues of organic origin, such as road dirt, oil, bugs and organic residues
- An Acid pH will remove all residues of inorganic origin, such as limescale, water marks and acid rain residues
The 2pH combined car wash cycle of Labocosmetica acts on all types of dirt and contaminants, decontaminating car paint and removing all mineral salts, road dirt, limestone, acid rain residues and chemical contaminants that are not always visible to the human eye, which make the colour fade and lower the performance of the protection previously applied on the car.
The 2pH combined cycle by Labocosmetica uses an innovative method based on the pH of each of their products to remove dirt and contaminants in a targeted and effective way, but without corroding the previously applied protective products. They are also safe to use, since they are certified to ensure safe use even on delicate paints and surfaces.
How to use Labocosmetica 2pH Maintenance Wash System
A maintenance wash is a key step when it comes to maintaining a protective product such as ceramic coating, wax or sealant.
Thanks to the different pH of the products used, the 2ph combined car wash cycle of Labocosmetica frees the protective material on the vehicle from dirt and contamination, in fact, each pH, acts on different dirt and contamination.
STEP 1: PRIMUS - ALKALINE PH
PRIMUS- PreWash mode apply with a foam cannon, diluted 1:5 in winter and diluted 1:10 in summer.
PRIMUS- Pre-Treatment mode apply with a spray bottle diluted 1:10 in areas where more dirt accumulates, such as the lower part of the doors, the back of the lower boot, or to remove bugs marks from the front.
- Dispense PRIMUS from bottom to top
- Leave the on for 5 minutes until the foam dissolves, so it can perform the cleaning action
- Rinse starting from the bottom upwards
STEP 2: PURIFICA - ACID PH
PURIFICA - PreWash mode apply with a foam cannon, diluted 1:10.
Pre-Treatment mode apply with a spray bottle diluted 1:10 in areas most exposed to the buildup of minerals such as the lower part of the doors and the back of the lower boot.
PURIFICA will remove limestone residues, unclog and rejuvenate the ceramic coating wax or sealant, solving the root problem, effectively yet gently dissolving and sequestering the calcium, mineral deposits, and residues of contamination from acid rain.
- Dispense PURIFICA from bottom to top
- Leave on for 2-4 minutes until the foam dissolves, so it can perform the cleaning action
-
Do not rinse off and continue to step 3
STEP 3: PURIFICA - ACID PH
Let's move on to the mechanical action, which is to be performed using PURIFICA shampoo. PURIFICA's super lubricated formula allows it to apply smoothly during the washing phase, without leaving any streaks, and it can also be used on windows.