Option 1:

• 1x Labocosmetica PRIMUS 2.0 Alkaline pH Snow Foam Pre-Wash ph11 1L
• 1x Labocosmetica PURIFICA Acid pH Snow Foam Pre-Wash 1L
• 1x Labocosmetica SEMPER pH Neutral Shampoo 500ml
• 1x GTECHNIQ W6 Iron Removing Wheel & Paint Cleaner 500ml
• 1x The Rag Company The Ultra Wash Mitt with Cuff – Korean Microfiber - Black
• 1x The Rag Company The Gauntlet Microfiber Drying Towel Large
• 1x P&S Brake Buster Non Acid Foaming Wheel Cleaner 473ml
• 1x The Rag Company The Cyclone Ultra Wheel Mitt 15 x 18cm (2pack) Grey
• 1x Detail Factory Tyre Brush Grey
• 1x Detail Factory Ultra-Soft Detailing Brush Grey Short

Option 2:

All of the above plus the below

• 1x Car Wash Bucket With Lid 15L - Wheels
• 1x Car Wash Bucket With Lid 15L - Rinse
• 1x Car Wash Bucket With Lid 15L - Wash
• 2x THE DETAIL GUARDZ Dirt Lock - Wash Bucket Insert - Black

Step 1: Prepare Wash Buckets

Purpose: Ensures a safe wash by minimising contamination and swirl marks.

1. Insert The Detail Guardz Dirt Lock Wash Bucket Insertto the Wheel and Rinse Bucket: Helps trap dirt at the bottom of the buckets to prevent contamination.

• Wheels Bucket: Fill with clean water.
• Wash Bucket: Fill with water and add Labocosmetica SEMPER shampoo.
• Rinse Bucket: Fill with clean water.

Step 2: Clean Wheels

1. Rinse the Wheels: Start by thoroughly rinsing the wheels and tyres with water to remove loose dirt and debris.
2. Apply Wheel Cleaner:Dilute Brake Buster in an empty spray bottle:
   Rims: 3:1 (1L Bottle = 250ml product & 750ml Water)
   Tyres: Full strength.
   Spray Brake Buster generously onto the wheels and tyres.
   Allow it to dwell for 1–2 minutes to break down grime, brake dust, and dirt.
3. Clean the Wheels:

Lug Nuts: Use the Detail Factory Ultra-Soft Detailing Brush to clean intricate parts, such as spokes, lug nuts, and wheel emblems.
Detailed Areas:Use The Rag Company The Cyclone Ultra Wheel Mitt to gently clean the rim surface and maneuver it into any tight space.
Scrub the Tyres:Use the Detail Factory Tyre Brush to scrub the tyres, removing dirt and old tyre dressings.

4. Rinse the Wheels: Rinse thoroughly to remove all product residue and dirt.

Step 3: Pre-Wash with Labocosmetica PRIMUS 2.0 (Alkaline pH11 Snow Foam)

Purpose: Removes road grime, oil, and organic residues.

1. Dilution: Mix Labocosmetica PRIMUS 2.0 with water in a foam cannon or pump sprayer according to manufacturer recommendations (typically 1:10 to 1:50 depending on contamination level).
2. Application: Apply the foam generously, covering the entire vehicle from bottom to top.
3. Dwell Time: Allow the foam to sit for 3–5 minutes to break down contaminants. Do not let it dry.
4. Rinse: Use a pressure washer to rinse off thoroughly from top to bottom.

Step 4: Decontamination with Labocosmetica PURIFICA (Acidic pH Snow Foam)

Purpose: Removes inorganic contaminants like water spots, limescale, and acid rain residues.

1. Dilution: Mix Labocosmetica PURIFICA with water (typically 1:20 to 1:40 depending on contamination level).
2. Application: Spray or foam the solution onto the vehicle, ensuring even coverage.
3. Dwell Time: Let the product work for 2–4 minutes. Do not let it dry.
4. Rinse: Thoroughly rinse off with a pressure washer.

Step 5: Iron Fallout Removal with GTECHNIQ W6

Purpose: Dissolves embedded iron particles from wheels and paintwork.

1. Application: Spray GTECHNIQ W6 onto wheels and areas with heavy contamination.
2. Reaction Time: Let it sit for 3–5 minutes. The product will turn purple as it reacts with iron particles.
3. Agitation (Optional): Use a soft brush on wheels if necessary.
4. Rinse: Pressure wash thoroughly to remove residue.

Step 6: Contact Wash with Labocosmetica SEMPER (pH Neutral Shampoo)

Purpose: Lifts dirt while maintaining protective layers.

1. Preparation: Use the three-bucket method with wheels, labeled rinse, wash, and soap. Each bucket includes The Detail Guardz Dirt Lock Wash Bucket Insert to trap dirt and prevent contamination.
2. Washing: Fill the wash bucket with water and SEMPER shampoo. Use The Rag Company Ultra Wash Mitt with gentle, straight-line motions, starting from the top and working downward.
3. Rinsing: Periodically rinse the mitt in the rinse bucket to remove dirt before reloading with soap.
4. Final Rinse: Rinse the vehicle with clean water to remove all soap residue.

Step 7: Drying with The Rag Company Gauntlet Microfibre Drying Towel

Purpose: Ensures a streak-free, water-spot-free finish.

1. Technique: Lay the towel on the surface and gently drag or pat dry. Avoid applying excessive pressure.
2. Final Touches: Check for any remaining water spots and address them with a quick detailer if needed.

Additional Tips

• Work in the shade: Prevents premature drying of products.
• Use separate towels/mitts for different stages: Avoids cross-contamination.
• Regular maintenance: Keeping up with regular washes ensures easier cleaning and better protection over time.

By following these steps, you’ll achieve a deep, professional-level clean while maintaining your vehicle’s protection and finish.