Search

Search our shop

Sale

Sonax Perfect Finish and Cutmax Bundle

SPFCMK-1000

Size: 1000ml Kit
In-stock: Inventory updated
Arriving End of NOVEMBER 2024

Sonax Perfect Finish and Cutmax Bundle Cutting Compound and Polish


Designed to achieve the highest cutting and polishing results without severely damaging the clear coat.
Sanded areas up to P1500 can quickly and safely be removed with excellent gloss effect.

Directions for use:

  • Apply a small amount (3 or 4 Dime-sized drops) of polish onto the SONAX Polishing Pad.
  • Polish the surface at a low rotating speed (800 rpm) for approximately 20-30 seconds, applying 15-20 pounds of pressure. After 30 seconds, remove pressure completely using only machine weight, increase machine speed (1200 RPM) and continue polishing for 45-60 seconds. When finished polishing, wipe down the paint surface with a Microfiber Cloth.

SONAX PROFILINE Perfect Finish One Step Polish

Sonax Perfect Finish polishes and removes scratches, sanded paint defects such as dust inclusions, paint runs, and water spots in a single step - No wet sanding or compounding is necessary before use. Removes marks of P2000 grit or finer, recommend applying with a rotary polisher  or DA with Medium cut Polishing pad.

Directions for Use:
  • Apply a little of the product directly to the sanded spot.
  • Polish the area at the lowest rotational speed (ca. 800 rpm) with the green Polishing pad (493 000) for 10 sec. Tilt the machine a little bit.
  • Afterwards, increase to medium rotational speed and allow the machine to run, now exerting only moderate pressure.
  • Guide it swiftly over the surface to avoid heat developing beneath the polishing pad.
  • Remove the polish residue with a microfiber cloth.