How to Clean Car Wheels and Tyres on BMW M2 | Step-By-Step Guide
Easy Step-By-Step Guide on Cleaning Your Wheels:
1. Rinse the Wheels
- Start by thoroughly rinsing the wheels and tyres with water to remove loose dirt and debris.
2. Apply Wheel Cleaner
- Dilute Brake Buster in Empty Spray Bottle:
- Rims - 3:1 (1L Bottle = 250ml product & 750ml Water)
- Tyres - Full strength
- Spray Brake Buster generously onto the wheels and tyres. Allow it to dwell for 1-2 minutes to break down grime, brake dust, and dirt.
3. Clean the Wheels:
- Wheel Barrels: Use the EZ Detail Wheel Brush to clean inside the barrels of the wheels, scrubbing gently and rinsing the brush as needed.
- Lug Nuts: Use the Premium Boar's Hair Detailing Brush to clean intricate parts, such as spokes, lug nuts, and wheel emblems.
- Detailed areas: Use the Ultra Wool Wheel Mitt to gently clean the rim surface and maneuver it into any tight space.
- Scrub the Tyres: Use the Detail Factory Tyre Brush to scrub the tyres, removing dirt and old tyre dressings.
4. Rinse the Wheels
- Rinse thoroughly to remove all product residue and dirt
5. Dry the Wheels
- Use the TRC Gauntlet Small 30cmx30cm towels to dry the wheels and tyres completely to avoid water spots.
Steps to Protect Your Tyres:
1. ARMOUR Detail Supply Tyre+ Shake the bottle well before use. Spray Tyre+ onto the Detail Factory Curveball Brush.
2. Evenly spread the Tyre+ product across the tyres, ensuring full coverage.
3. Buff for a Satin Finish Buff away any excess product with a clean section of a microfiber towel for a natural, satin finish.